Honeywell D1-528 Direct Thermostat Installation Guide
INNCOM DIRECT D1-528 THERMOSTAT INSTALLATION GUIDE
Table 16. Service Parameter
7. Press POWER to continue.
The last 2 digits of the Room ID will be displayed. 01
and LOW will appear.
8. Press the UP/DOWN arrow button to set the value
Parameter
Function
dor
Door Sensor Test
(range is 0-99).
UIn
rH
Window Sensor Test
Relative Humidity Test
Adjust inputs, reset, reebot
Access Local NVRAM
Advance HVAC EMS config
Teach Address
NOTE:
Press the POWER button to cycle between the HI,
LOW and MED values.
rUn
EEr
Gr.A
Adr
Io
9. Press DISPLAY to store the value, when the desired
Room ID is defined.
The D1-528 will beep and the new Room ID number
scrolls across the display.
Room Copy
Use rCP to copy a configuration from D1-528 that is
configured. This is normally done during initial
installation, but can be done at any time.
Teach I/O Map
Set the Room ID
The Room ID is normally set when the D1-528 is
initialized during installation. The Room ID can be
set/changed anytime using the rid parameter.
1. Press and hold
mode.
2. Press the UP/DOWN arrow button and select rCP
for 4 seconds to enter into service
parameter.
1. Press and hold
mode.
2. Press the UP/DOWN arrow button and select rid
for 4 seconds to enter into service
parameter.
ºF ºC
ºF ºC
A
DISPLAY
3. Press the DISPLAY button.
The currently set Room ID in the D1-528 minus 1 will
scroll across the display. For example if you had set
the Room ID to 00107, 00106 would scroll on the
display.
A
DISPLAY
3. Press the DISPLAY button.
The default 5 digit Room ID value (00001) will scroll
across the screen from highest to lowest (left to right
most value).
4. To begin copying from the default displayed Room ID,
press the DISPLAY button and proceed to step 7.
Otherwise continue with step 5.
5. Define a different “copy from” Room ID, using the
process defined in the “Set the Room ID” section
(steps 2-7) to define the copy from Room ID.
NOTE:
The default Room ID is comprised of three fields:
highest digit, middle two digits, and lowest two
digits.
6. Press the DISPLAY button when the desired “copy
from” Room ID is defined to start copying the
configuration from the D1-528 in the “copy from”
room.
Scrolling will stop at the highest digit first. The default
value 0 and HI will be displayed.
7. CPy will begin flashing on the D1-528 display.
The D1-528 will begin pinging the “copy from”
D1-528 using the Room ID defined to verify it is
communicating.
4. Press the UP/DOWN arrow button to set the value
(range is 0-6).
5. Press POWER to continue.
The next 2 digits of the Room ID will displayed.
00 and MED will appear.
6. Press the UP/DOWN arrow button to set the value
(range is 0-99).
31-00721-01
18
| General | Details |
|---|---|
| Name | Honeywell D1-528 Direct Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
Honeywell 5000 Series Thermostat Instruction Manual
Network Thermostat NetXTM X-Series Thermostat Installation Guide
ENGO E55W230WIFI Wi-Fi Thermostat User Guide
GE APPLIANCES RAK190V Energy Management Thermostat Owner’s Manual
Aprilaire 8570 Premium Programmable Thermostat Instruction Manual
WATTS IOM-T-563 Tekmar WiFi Thermostat Installation Guide
WEINMANN C16 WiFi Digital Room Thermostat Instruction Manual
QUIETWarmth Type UCG Thermostat User Manual
DIMPLEX ML2TA 2KW Convector Heater With Thermostat Instruction Manual
Warmup 3iE Energy Monitoring Thermostat Instruction Manual