Honeywell D1-528 Direct Thermostat Installation Guide
INNCOM DIRECT D1-528 THERMOSTAT INSTALLATION GUIDE
The D3 Red LED on the D-578 will blink rapidly
indicating it is in key distribution mode.
ADVANCED CONFIGURATION
The D1-528 has a Service Parameter mode with several
parameters that can be used to configure, test and
troubleshoot the D1-528.
The D-578 will begin to broadcast its unique property
key. Any D1-528 that receives this broadcast will
immediately adopt and start using the new key.
NOTE:
These are advanced features and should only be
performed by an experienced user.
NOTE:
The D-578 will remain in Key Distribution mode for
10 hours. You can manually exit out of Key
Distribution mode by again pressing the Blue Bind
button 6 times (press-press-press-press-press-
press). The D3 Red LED will stop blinking.
To enter/access the D1-528 Service Parameter Mode:
1. Press and hold
mode.
OR
for 4 seconds to enter into service
Room Configuration Complete
Press and hold
button, press and release the DISPLAY button, then
release the F/C button.
This will allow 60 seconds to initiate using a service
parameter before the display will time out back to Set
temperature.
press and release the POWER
The initial installation and configuration of the D1-528
in the rooms is complete. If desired, you can log into the
Honeywell Remote Building Manager (RBM) site for
your installation and see the rooms online. Room 106 is
online in the below example.
Entry into the service mode is confirmed when the LCD
display shows “rld”.
NOTE:
Refer to Honeywell document INNCOM Direct
Dashboard User Guide 31-00707 for more details.
2. Press the UP/DOWN arrow button to select the
desired service parameter item. The below table lists
the available service mode parameters.
Table 16. Service Parameter
Parameter
Function
rId
Room ID
rCP
HAC
FAn
tt
Room Copy
HVAC Type
Fan Speed
Target Temperature
Unoccupied Delta
Unoccupied Time
Unrented Setback
Unrented time
dLt
Uot
UrS
Urt
PAn
rF
PAN
RF Channel
rbd
Pn6
Ctr
LEn
PIr
Bind Remote Device
Ping RF or S5 devices
Contractor Mode
Limited Energy Management
PIR Motion Test
17
31-00721-01
| General | Details |
|---|---|
| Name | Honeywell D1-528 Direct Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
Schneider SpaceLogic Thermostat Installation Guide
nVent RAYCHEM E507S-LS Line Sensing Thermostat Instruction Manual
DELTA DORE Tywell 2050 Thermostat D’Ambiance Radio Installation Guide
GENERALLIFE FH254 Underfloor Heating Thermostat User Manual
Raychem Elexant 450c Thermostat Instruction Manual
Honeywell TH8321WF02 Vision Pro WiFi Programmable Thermostat User Manual
SHANGHAI TR9B Ultra Large Colorful Screen Capacitive Touch LCD Smart Thermostat User Guide
Warmme ET-72G(W) Thermostat User Manual
vtech W960 E-Smart Wireless Thermostat
HEAT-MY-HOME HMH200 WiFi Thermostat User Guide