Honeywell D1-528 Direct Thermostat Installation Guide
INNCOM DIRECT D1-528 THERMOSTAT INSTALLATION GUIDE
NOTE:
Press the POWER button to cycle between the HI,
LOW and MED values.
7. Press DISPLAY to store the value, when the desired
Room ID is defined.
ºF ºC
The D1-528 will beep when the value is stored and
the new Room ID number scrolls across the display.
Once the scrolling is completed rCP is displayed.
Room Copy
If you are configuring the first D1-528 that has a
different HVAC type, or you don’t want to use the room
copy feature, press the UP arrow button to skip rCP and
proceed to the HAC menu. Setup HVAC Type.
A
DISPLAY
Press POWER button five times to view the
defined copy from Room ID HI, MED and LO
values and verify they are correct.
Change any incorrect values, then try the room
copy again by pressing DISPLAY.
To copy the configuration from the D1-528 that has
already been fully configured:
• If a reply is received to the ping, the D1-528
will first read the firmware version of the “copy
from D1-528” and begin copying. CPy will
continue to flash.
ºF ºC
The D1-528 will display "V" to indicate a
mismatch in the firmware versions of the two
D1-528s and will continue copying.
• If the room copy was interrupted and could not
complete, the D1-528 will display an E12 error
code.
A
DISPLAY
1. Press the DISPLAY button.
The currently set Room ID in the D1-528 minus 1 will
scroll across the display, then display 0 _ _ and the HI
symbol. For example if you had set the Room ID to
00107, 00106 will scroll on the display.
ºF ºC
2. If you want to use the displayed Room ID, press the
DISPLAY button to start the copy configuration
process from the D1-528 displayed room ID then
proceed to step 5. Otherwise continue with step 3.
3. Define a different “copy from” Room ID, using the
process defined in the “Set the Room ID” section
(steps 2-7) to define the copy from Room ID.
A
DISPLAY
Press DISPLAY to start the copy process again.
CPy will again start to blink on the display.
If the D1-528 just continues to display E12
sometime after starting the Room Copy, the
D1-528 is having a problem reliably reading
the configuration from the Copy From D1-528.
Refer to the Troubleshooting section.
4. Press the DISPLAY button when the desired “copy
from” room id is defined to start copying the
configuration from the D1-528 in the “copy from”
room.
CPy will begin flashing on the D1-528 display.
The D1-528 will begin pinging the “copy from” D1-528
using the Room ID defined to verify it is communicating
and set to the same PAN ID and RF Channel.
5. When the copy is complete, the D1-528 will beep and
the display go blank for 10-15 seconds as the D1-
528 resets to commit the changes it made. OFF or
the Target Temperature value will be displayed.
The new D1-528 should now be configured with the
same settings as from the configured D1-528 and
you should be able to begin using it.
• If no reply is received from the configured D1-
528 after 60 seconds, the D1-528 will beep
and display E11 as error code indicating it
never received a reply to the pings and could
not start the Room Copy.
31-00721-01
14
| General | Details |
|---|---|
| Name | Honeywell D1-528 Direct Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
STEGO ET 011 Electronic Thermostat User Manual
PECO T372P Thermostat Instruction Manual
EMERSON 1F76U-22WFB Series Sensi Lite Smart Thermostat Installation Guide
GENERAL LIFE ARUNA 302S Wired Room Thermostat User Manual
ENGO CONTROLS FAN-24W 24V Fan Coil Thermostat User Guide
Honeywell D1-528 Inncom Direct Thermostat User Guide
EUROTRONIC COMET Programmable Energy Saving Radiator Thermostat User Manual
Danfoss ECtemp 132 Electronic Thermostat Installation Guide
micro-Air EasyTouch RV 351 Thermostat User Manual
Lightwave DTS92E Honeywell Home Wireless Room Thermostat User Manual