Honeywell D1-528 Direct Thermostat Installation Guide
INNCOM DIRECT D1-528 THERMOSTAT INSTALLATION GUIDE
• If no reply is received from the configured
D1-528 after 60 seconds, the D1-528 will beep
and display E11 as error code indicating it
never received a reply to the pings.
2. Press the UP/DOWN arrow button and select HAC
parameter.
Verify you have defined the correct “copy from”
Room ID and the D1-528 in the copy from
room is installed, powered, and configured
correctly, especially its Room ID. Then try the
room copy again by pressing the DISPLAY
button.
ºF ºC
• If a reply is received to the ping, the D1-528
will first read the firmware version of the “copy
from” D1-528 and begin copying.
A
DISPLAY
The D1-528 will display "V" to indicate a
mismatch in the firmware versions of the two
D1-528s and will continue copying.
When the copy is complete, the D1-528 will
reset, and the D1-528 will beep indicating the
copy is complete and reset.
The new D1-528 should now be configured
with the same settings as from the configured
D1-528 and you should be able to begin using
it.
3. Press the DISPLAY button to enter the HVAC Type
menu.
V and currently selected HVAC type will be displayed.
4. Press the UP/DOWN arrow button to choose one of
the following options from the table below:
Table 17 Setup HVAC Type
Sr No
HVAC Type
NOTE:
There will be no option to select the HAC (HVAC) or
Fan (Fan Speed) configuration after the room copy
is performed.
1
2
3
4
5
6
7
8
9
FCU-4
FCU-2 w/ elec
FCU-2 w/o elec
PTAC
• If the room copy was interrupted and could not
complete, the D1-528 will display an E12 error
code for 5 seconds. Retry the Room Copy
process by pressing the DISPLAY button. CPy
will again start to blink on the display.
HP-B W2 assist
HP-B W2 replace
• If the D1-528 continues to display E12 error
code, the D1-528 is having a problem reliably
reading the configuration from the copy from
D1-528. For more information refer to
Troubleshooting.
HP-O W2 assist
HP-O W2 replace
Y1/2 W1/2 G AHU
2nd stage Heat Pump B –AHU
2nd stage Heat Pump O -AHU
PTAC + W1
Setup HVAC Type
The HVAC control type is normally set when the D1-528
is initialized during installation. The HVAC control type
can be set/changed anytime using the HAC parameter.
10
11
12
1. Press and hold
mode.
for 4 seconds to enter into service
5. Press DISPLAY to set the value.
The D1-528 beeps to confirm the value has been set.
The D1-528 will display OUTSIDE icon indicating it
has changes that need to be stored.
NOTE:
The HAC menu will also automatically change to
the FAn menu. If you have changed the HAC HVAC
type, a different combination of available fan
speeds may be required.
19
31-00721-01
| General | Details |
|---|---|
| Name | Honeywell D1-528 Direct Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
Honeywell RLV4300 5-2 Programmable Thermostat Owner’s Manual
heatmiser Slimline-RF V3 Programmable Wireless Thermostat Instructions
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
oventrop Vindo TH Thermostat Instruction Manual
HIVE Cheap Smart Thermostat User Guide
King Electric K322E Electronic Non Programmable Thermostat Instructions
Robertshaw 4350 BJ Gas Thermostat Instructions
NEOMITIS RTUa Mechanical Room Thermostat Instruction Manual
ELDOM NHC-RHN-WiFi Electronic Thermostat User Manual
aube technologies TH110A-DP-P Thermostat User Manual