Home > CANPOL BABIES > CANPOL BABIES 77-053 4 in 1 Bottle Warmer and Sterilizer with Thermostat User Manual
CANPOL BABIES 77-053 4 in 1 Bottle Warmer and Sterilizer with Thermostat User Manual
STEAM DISINFECTION
6. Press the
button. You will see “00” on the display what means standby mode. Remember! Never turn
In the warmer, you can easily steam disinfect a bottle and other small accessories used for bottle and
breastfeeding (e.g. nipple protectors).
on the warmer when there is no water in it.
7. Press the function button, selecting the bottle mode or dinner mode
:
Maintaining the temperature of liquid foods – “Bottle”:
1. Place the warmer on a flat and stable surface, out from the reach of children, and where it can’t be knocked
or moved during use. If you have any doubts, read the warnings at the beginning of the instructions again.
2. Add about 75-85 ml of water to the empty heating chamber.
•
The temperature is pre-set to 40˚C. You can change the pre-set temperature in the range: 35˚C - 50˚C,
depending on your needs, by using the “-“ and “+” buttons on the control panel.
After setting the temperature, the warmer will start working at the set value, counting down the operating
time starting from 10 hours.
•
3. Place the basket in the heating chamber.
•
•
During this time, the temperature of the water in the warmer will be maintained at the indicated level.
After 10 hours, the warmer will automatically end the cycle, signalling it with a “Dee-Dee-Dee” sound.
Important! Before beginning the steam disinfecting process, wash all the elements according to the
instructions provided by their manufacturer, and rinse thoroughly.
Maintaining the temperature of solid foods – “Dinner”:
•
The temperature is pre-set to 70˚C. You can change the pre-set temperature in the range: 50˚C - 90˚C,
depending on your needs, by using the “-“ and “+” buttons on the control panel.
After setting the temperature, the warmer will start working at the set value, counting down the operating
time starting from 3 hours.
4. Insert a bottle into the basket (upside down) or loosely arrange small accessories such as a feeding teat,
cap, sealing disc, and bottle cap (bottom-up).
•
When steam disinfecting other accessories used for babies or nursing mothers, place the items in the basket in such a
way as to leave enough room for the hot vapour to reach them easily.
•
•
During this time, the temperature of the water in the warmer will be maintained at the indicated level.
After 3 hours, the warmer will automatically end the cycle, signalling it with a “Dee-Dee-Dee” sound.
5. Put an adapter ring onto the warmer’s body to limit the amount of escaping vapour.
6. Plug the power cord into the power socket.
7. Press the power button . Remember! Never turn on the warmer when there is no water in it.
For the safety of your children, always check the temperature of the food before feeding. Place a small
amount of food on the inner part of your wrist as the skin is delicate and sensitive at this spot.
8. To stop the warmer during the cycle, press the
from the power socket.
button to turn off the warmer, and then disconnect it
8. Press the function button selecting the “fast heating” option with the icon
.
9. Please note that hot vapour is emitted while the warmer is operating. Be very careful as it can cause severe
burns. Avoid contact with the skin. Keep your face and hands at a safe distance and do not place them
above the device while it is in use. To avoid the possibility of burns, never move or carry the warmer while
it is working.
FOOD DEFROSTING
In the warmer, you can easily and gradually defrost in a water bath food frozen in storage bags or containers
dedicated for food freezing.
1. Place the warmer on a flat and stable surface, out from the reach of children, and where it can’t be knocked
or moved during use. If you have any doubts, read the warnings at the beginning of the instructions again
2. Add about 200 ml of water to the empty heating chamber.
3. Place the basket in the heating chamber.
4. Put the frozen food in a bag or container into a basket.
5. Plug the power cord into the power socket.
10. After the water evaporates, the warmer switches off automatically, signalling the end of the cycle with a
„Dee-Dee-Dee” sound (after about 8 minutes). To stop the warmer during the cycle, press the
turn off the warmer, and then disconnect it from the power socket.
11. Wait a few minutes for the disinfected items and the warmer to cool down. Always use a cloth when
removing a bottle. When removing small items, lift them together with the basket to avoid the possibility
of burns, and tip them onto a clean towel. Warning! Do not touch the body or the heating chamber, because
they are hot.
button to
6. Press the power button . Remember! Never turn on the warmer when there is no water in it.
7. Press the function button, selecting the bottle mode , and then use the „-” button to set the
temperature to 35˚C.
Important!
•
•
•
DO NOT place electrical appliances or components containing metal inside the warmer due to the risk of
damage.
DO NOT use bleaches or chemical solutions / disinfectant tablets in the warmer or for the products that
will be scalded in it.
As in the case of heating food in a bottle/container, the defrosting time depends on the same factors and its exact
determination is not possible.
Always follow the cleaning instruction for items which will be placed in the appliance.
8. After complete defrosting, shake the container or stir the food in container to mix the separated fat
particles with the remaining volume of milk and pour it into the bottle. To heat the milk placed in a bottle
to a temperature suitable for serving to a child, use the „fast heating” mode.
Note!
•
•
•
NEVER defrost the food by using the “fast heating” mode.
NEVER refreeze previously defrosted milk.
Dispose of any milk that has not been used.
6
7
77_053reb_instrukcja_podgrzewacz_ms001.indd 6-7
25.11.2022 14:55:47
| General | Details |
|---|---|
| Name | CANPOL BABIES 77-053 4 in 1 Bottle Warmer and Sterilizer with Thermostat User Manual |
| Make | CANPOL BABIES |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.02 MB |




























































































