LENNOX S40 Smart Thermostat User Guide
What is ASHRAE?
Lennox Smart Devices
ASHRAE 62.2 is a national standard that provides methods for achieving
acceptable indoor air quality in typical residences. It was developed and
is maintained by the American Society of Heating and Air-Conditioning
Engineers (ASHRAE). One of the standard three main components is Whole
House Ventilation which is exhausting stale indoor air and replacing it with
fresh outdoor air.
The exhaust fan dilutes the air in the main living spaces with outside air to
remove unavoidable contaminants from people, pets, cleaning, off gassing,
etc. The whole house fan flow rate is determined based on the floor space
and the number of bedrooms. The whole house fan provides multiple air
exchanges within the home each day. The operation can be continuous or
intermittent (much higher airflow cycled by a timer) if 1 zone or less.
Lennox Smart Room Sensor
IMPORTANT
The Lennox Smart Room Sensor is not compatible with systems that have
the Lennox Smart Zoning System (iHarmony) installed.
The Lennox® S40 Smart Thermostat can support up to six Lennox® Smart
Room Sensors.
Adding and Removing Smart Room Sensor
Please refer to the Smart Room Sensor Installation and Setup Guide for
information on the devices, placement, and pairing using the Lennox Home
App.
Advanced Settings
This section is for installers and technicians ONLY to customize system
settings and run various diagnostic tests.
IMPORTANT
View Support Service Control Center
The first device must be added by the technician in order to create the smart
devices network. Thereafter the homeowner can add or remove devices
using the Lennox Home App.
Allows installers and technicians to perform custom configurations tailored for
the homeowner’s unique requirements.
Restart
View and Understanding the Smart Room Sensor Detail Screen
Options are to restart Smart Hub, thermostat, or both.
From the thermostat’s Home screen, select My Home. Select the wireless
extender icon. This screen displays the details for the Smart Room Sensor.
Unregister System
Unregister System means that the thermostat will no loner be linked to the
homeowner’s email account.
Figure 22. Smart Room Sensor Detail Screen
• Selecting Current Temp button is a short cut to the Current Temperature.
There the homeowner can select sensors to participate in Room
Averaging using Occupancy Detection.
38
| General | Details |
|---|---|
| Name | LENNOX S40 Smart Thermostat User Guide |
| Make | Lennox |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.3 MB |
(1 votes, average: 5.00 out of 5)
Loading...
LENNOX L40 Smart Thermostat Owner’s Manual
LENNOX EL18KCV Smart Wi-Fi Communicating Thermostat User Manual
HEAT DECOR HD-T1000 WIFI Thermostat User Guide
DEVIreg 316 Electronic Thermostat Installation Guide
BUDDERFLY BTS-U2 Thermostat User Manual
expert4house BHT-006 Series Thermostat Instruction Manual
Honeywell TH3110D1008 Non-Programmable Thermostat Instruction Manual
Moes WIFI 002 Series Wi-Fi Thermostat Instruction Manual
nVent GM-TA Thermostat User Manual
BECA BHP-8000 Room Thermostat User Manual
Rayotec PERGARP0DCN6YB3I Wi-Fi Thermostat Instruction Manual
ENGO CONTROLS EONE-BATW, EONE-BATB Internet Controlled Thermostat User Guide