LENNOX S40 Smart Thermostat User Guide
Smart Away
3.22 km) range of the home, the system is considered home. The system
will use the set points from the schedule or what was manually set.
Both Home Info and Account options must be completed before this feature
can be enabled.
The Smart Away feature depends on:
• Lennox Home App continuously running on the homeowner’s mobile device
(smart phone or tablet) and being logged in to their account.
» If the closest participating mobile device moves into the 2.1 to 8 miles
(3.40 to 13.04 km) range, the system is considered in transition. The
system will start to either increase or reduce the heating or cooling set
point.
Once all participating mobile devices have moved beyond the 8.1 mile (9.50
km) range from the house, the system sets the set points to the Away set
points (65ºF for heating and 85ºF for cooling).
• Requires Wi-Fi and location settings to be enabled on the homeowner’s
mobile device. Android devices must also have the location mode set to
“high accuracy.” Consult the mobile device user guide for instructions.
Smart Away can also be enabled from the mobile device once the Lennox
Home App has been installed and launched. Go to the Menu > Settings
> Away and turn ON Smart Away. To allow the mobile device to use this
feature, turn ON participate. The Away Fence option will appear and by
default, the setting is two miles (3 km). The range for this setting is 2 to 6
miles (3.00 to 9.50 km).
Multiple Mobile Devices
It is possible to have more than one mobile device participating in Smart
Away for this system. The Away Fence can be set to the same value or
different values for each mobile device. The thermostat will not show the
Smart Away indicator until all devices have moved past their inner Away
Fence, and the system will not reach the homeowner Away set points until all
devices have moved past their outer fence.
Inner and Outer Away Fences
NOTE: Smart Away will be canceled when the system is enrolled in energy
The inner Away Fence is set by the user anywhere between 2 to 6 miles
(3.00 to 9.50 km) on the Lennox Home App. This setting can be different
for each participating mobile device. When any of the participating mobile
devices are located inside of its inner Away Fence, the system will not be
in Smart Away. The system will use the temperature set points defined by
the schedule or what was manually set. Once the inner Away Fence is set,
the outer fence for each participating mobile device will be automatically
calculated by the Smart Away algorithm.
savings with a utility provider and an energy saving event is active.
Mobile Device Location Services
To use Smart Away on IOS devices, the mobile device must be running IOS
12, 13, 14 or 15. Location Services Settings are as follows:
1. Location services will need to be enabled for this feature to work. Go to
Transition Set Points
Settings > Privacy > Location Services.
When the closest participating mobile device is between the inner and outer
Away Fences, the thermostat will show the Smart Away indicator. The
system will use transition set points to heat or cool the home. The transition
temperature set points are automatically calculated by the Smart Away
algorithm using a combination of the home and away set points.
2. Select Always Allow for Smart Away to control the temperature in the
home while occupants are away.
3. Select Always Allow with Precise Location Enabled for Smart Away to
control the temperature in the home while occupants are away.
4. Select Allow While Using App for Smart Away to control the temperature
in your home while occupants are away.
Away Set Points
To use Smart Away on Android devices, the mobile device must be running
Android Version 9 or higher. Location Services Settings are as follows:
Once all participating mobile devices have moved outside the transition
range, the thermostat will continue to show the Smart Away indicator and the
homeowner’s Away set points will be used to control the system.
1. When allowing the Lennox Home app access to device location, the
user must select Allow all the time for the Smart Away feature to work
correctly. Go to Settings > Apps > Thermostat > Permissions > Lo-
cations and Allow all the time setting is enabled.
Example:
The away set points are 65ºF (18.5ºC) for heating and 85ºF (29.5ºC) for
cooling.
» If the Away Fence is set to two miles for all participating mobile devices
and the closest participating mobile device is within the 0-2 miles (0 to
29
| General | Details |
|---|---|
| Name | LENNOX S40 Smart Thermostat User Guide |
| Make | Lennox |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.3 MB |
(1 votes, average: 5.00 out of 5)
Loading...
LENNOX L40 Smart Thermostat Owner’s Manual
LENNOX EL18KCV Smart Wi-Fi Communicating Thermostat User Manual
SUNRICHER SR-ZG9092A Zigbee Heating Thermostat Installation Guide
SALUS RT310SR Wireless Thermostat User Manual
emos P56201UF GoSmart Digital Room Thermostat Instruction Manual
expert4house BHT-006 Series Thermostat Instruction Manual
Danfoss Icon2 24V RT Room Thermostat Installation Guide
resideo TH4110U2005 T4 Pro Programmable Thermostat User Manual
SunTouch SunStat CommandPlus Programmable Thermostat Instruction Manual
WARMZONE UWG5 Wi-Fi LED Touch Thermostat User Guide
SECURE ThermoPlus PRT1 Programmable Room Thermostat Instruction Manual
Honeywell Home DT4 Wired Room Thermostat Installation Guide