Home > Homematic IP > homematic IP HmIP-eTRV-2 Radiator Thermostat Instruction Manual
homematic IP HmIP-eTRV-2 Radiator Thermostat Instruction Manual
Operation
6.2.3 Support ring
The actuator now performs an adjust-
ment run. “ ” and the activity sym-
bol ( ) are displayed. During this time,
no other operation is possible. After
the adjustment run has been success-
ful, the display returns to normal.
The valves from different manufactur-
ers may have tolerance fluctuations
that make the radiator thermostat
more loosely seated on the valve. In
this case, the support ring provided (R)
should be inserted into the flange be-
fore fitting the radiator thermostat.
If the adjustment run has been
initiated prior to fitting or if an
error message (F1, F2, F3) is dis-
played, press the control wheel/
boost button (E) and the motor
reverses to the “
” position.
7 Operation
After pairing and mounting have been
performed, simple operations are avail-
able directly on the device.
R
If the radiator thermostat is in
standby mode, please press the
control wheel (E) once before
operation to activate the device.
Figure 9
6.3 Adjustment run
When the batteries are inserted,
the motor retracts to simplify
installation. Meanwhile, “
and the activity symbol ( ) are
displayed.
• Temperature: Turn the control
wheel (E) to the right or to the left
to manually change the tempera-
ture of the radiator. In automatic
mode, the manually set tempera-
ture will remain the same until the
next point at which the schedule
changes. Afterwards, the defined
heating schedule will be enabled
again. During manual mode, the
temperature remains activated un-
til the next manual change.
”
After the radiator thermostat has been
fitted successfully, an adjustment run (
) must be performed to adapt the
device to the valve. To do this, proceed
as follows:
• As soon as “
” is displayed,
press the control wheel/boost but-
ton (E) to start the adjustment run.
• Manual and automatic mode: Press
and hold down the control wheel
(E) to switch between manual and
automatic mode. In automatic
mode, the defined heating sched-
ule of the Homematic IP App is
If the display backlight is off, you
must press button (E) a second
time to start the adjustment run.
24
| General | Details |
|---|---|
| Name | homematic IP HmIP-eTRV-2 Radiator Thermostat Instruction Manual |
| Make | Homematic IP |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.35 MB |
(1 votes, average: 5.00 out of 5)
Loading...
homematic IP HmIP-BWTH-A Wall Thermostat Installation Guide
homematic IP HmIP-WTH-B-2 Wall Thermostat Installation Guide
homematic IP TRV-E-A Monday Radiator Thermostat Instruction Manual
homematic IP HAP Radiator Thermostat Instruction Manual
homematic IP HmIP-eTRV-F Radiator Thermostat Instruction Manual
Homematic IP HmIP-WTH-B Wireless Wall Thermostat Instruction Manual
homematic IP HmIP-eTRV-E Series Radiator Thermostat Evo Installation Guide
Homematic IP BMOAONSUT Radiator Thermostat User Manual
homematic IP C-2 Radiator Thermostat Instruction Manual
homematic IP IP HmIP-eTRV-CL Radiator Thermostat Instruction Manual
HEATIT Z-Temp3 is a Battery Operated Thermostat Instruction Manual
Honeywell PRO3000 Series Non-Programmable Digital Thermostat Instruction Manual
Danfoss TPOne-B Electronic Programmable Room Thermostat User Guide
FRICO TPT16, TPT16WF Thermostat Instruction Manual
GROHE 26984001 Vitalio Comfort 250 Shower System with Bath Thermostat Installation Guide
Hycontrol HY08AC Central Air Conditioning Thermostat Instruction Manual
ideal BOILERS Combi RF Wireless Boiler Thermostat User Guide
Uponor ETN4 Ecoflex Supra Standard Thermostat Instruction Manual
EPH CONTROLS CMF Room Frost Thermostat Instruction Manual
lae AC2-2 Two Stage Thermostat Instructions