EPH CONTROLS CMF Room Frost Thermostat Instruction Manual

1

Page 1 of 1  

Installation Instructions  

For use in normal environments.  

CM_ Room Thermostat Hardwired  

CAUTION! Installation and connection should only be carried out by a qualified  

person and in accordance with national wiring regulations.  

Before commencing any work on the electrical connections, you must first disconnect the thermostat  

from the mains.  

None of the 230V connections must be live until the installation has been completed and the housing is  

closed.  

Only qualified electricians or authorised service staff are permitted to open the thermostat.  

There are parts that carry mains voltage behind the cover. The thermostat must not be left unsupervised  

when open. (Prevent non specialists and especially children from gaining access to it.)  

If the thermostat is used in a way not specified by the manufacturer, its safety may be impaired.  

The above image displayed is product CM2, design of  

other products in the CM_ range may vary.  

Prior to setting the thermostat, it is neccessary to complete all required settings described in this section.  

Important: Keep this document  

This thermostat can be mounted in the following ways:  

1. To a recessed conduit box 2. To a surface mounted box 3. Directly mounted on wall  

1

3

5

2

Type  

IP20  

EN60529  

1C  

EN60730  

50 122  

°C °F  

0

32  

5-95%RH  

4

84  

6

EPH Controls Ireland  

EPH Controls UK  

technical@ephcontrols.com www.ephcontrols.com  

technical@ephcontrols.co.uk www.ephcontrols.co.uk  

20221103_CM_Insins_PK  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	EPH CONTROLS CMF Room Frost Thermostat Instruction Manual
Make	EPH CONTROLS
Language	English
Filetype	PDF (Download)
File size	0.3 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• EPH CONTROLS

EPH CONTROLS CMF Room Frost Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Installation instructions for normal environments. Installation and connection should only be carried out by a qualified person in accordance with national wiring regulations. Disconnect the thermostat from the mains before commencing any work on the electrical connections. None of the 230V connections must be live until the installation has been completed and the housing is closed. Only qualified electricians or authorized service staff are permitted to open the thermostat. There are parts that carry mains voltage behind the cover; the thermostat must not be left unsupervised when open. If the thermostat is used in a way not specified by the manufacturer, its safety may be impaired. Prior to setting the thermostat, complete all required settings described in this section. The thermostat can be mounted in various ways: to a recessed conduit box, to a surface mounted box, or directly mounted on the wall. The product type is IP20, compliant with EN60529 and EN60730 standards.