Home > WHITE RODGERS > White Rodgers 1F95-1277 Big Blue Universal Thermostat Instruction Manual
White Rodgers 1F95-1277 Big Blue Universal Thermostat Instruction Manual
PROGRAMMING
Programming Tip: Copy Program
Automatic Schedule
When programming your thermostat, you may copy the
program from one day to another day or group of days using
the Copy key. In 7 day programming mode, a day can be
copied to another day or all six other days. In 5/1/1 day
programming mode the weekday (Mon – Fri) program can be
copied into Sat and Sun or either Sat or Sun.
This feature provides a method to program every day with
the most popular time and temperature settings using one
key. For this feature to be available, the Auto Schedule
options (Installer/Configuration menu item 17, AS Heat, or
item 18, AS Cool) must be selected On.
To use Auto Schedule, press Run Schedule to be sure you
are in normal operating mode. In SYSTEM Heat mode, use
To copy a program from one day to another:
1) In Set Schedule mode, enter the program for the day or
select the day you wish to copy by pressing Advance
Day.
the
or
keys to select your “Comfort Temperature”.
When your “Comfort Temperature” is selected, press Auto
Schedule key. The key will begin to flash indicating that the
feature is ready to store your selected temperature. Press
Auto Schedule a second time to complete the process. The
Auto Schedule key will disappear to indicate that the Auto
Schedule command has been accepted.
2) Press Copy. The display will show “Copy” next to the
SYSTEM key and the day of the week that will be copied.
3) Press Advance Day. The day being copied will be
indicated and the other days will be flashing.
4) If you wish to copy to all days skip to next step or press
Advance Day until the day you wish to copy to is
flashing.
In Heat mode the thermostat will maintain your “Comfort
Temperature” during the Morning, Day and Evening periods
and setback 6° for the Night. Morning period will begin at
6:30 AM and Night period will begin at 10:30 PM.
5) Press Copy. “Copy” will disappear, the day you copied
from will disappear and the day(s) you copied to will be
on.
6) If you wish to copy this same program into other days,
press Copy and repeat steps 3, 4 and 5.
7) Press Run Schedule to return to normal operation.
To set the Auto Schedule temperature for Cool mode, press
SYSTEM to change the mode to Cool and repeat setting the
temperature. In Cool mode, the thermostat will maintain your
selected “Comfort Temperature” continuously.
Fill in the blank schedule on the next page then:
The “Comfort Temperature” can be temporarily overridden by
changing the setpoint temperature using the
Enter the Heating Program
or
keys.
1) Press the Menu button and then press Set Schedule.
Press SYSTEM button to select either "Heat" or "Cool" in
the system switch area indicating the active mode being
programmed. You can switch to the other mode by
pressing the system switch at any time.
Once Auto Schedule has been set and the key has disap-
peared, it can be reset in the Installer/ Configuration menu.
Entering Fan Program
2) The top of the display will show the day(s) being pro-
grammed. The time and set at temperature are also
displayed. "Morning" will also be displayed to indicate
the period.
In the Set Schedule mode, the FAN key is used to select the
fan operation during a program period. The default state of
the Fan key is FAN Auto (fan runs during a call for cool but
not on a call for heat). It can be changed to FAN Prog (fan
runs during a program period). Each press of the FAN key
will change the mode of the fan between Auto and Prog. In
the Run mode, when a program period that has FAN Prog
begins, the fan will turn on and stay on during the complete
period. The display will show FAN On Prog.
3) Press
selected temperature for the 1st heating period (Morning).
4) Press or key to adjust the start time for period.
or
key to change the temperature to your
The time will change in 15 minute increments.
5) Press FAN to select Auto or Prog.
6) After you have set the time and the temperature for the
period to begin, press Set Schedule to advance to the
next program period.
In the Run mode, pressing the FAN key will change the fan
from Auto (default setting) to On (fan running continuously)
or Prog. When FAN Prog is displayed, the fan will run when
the system cycles. If the system does not cycle for more than
60 minutes, the thermostat will turn the fan on for 10 minutes
and off for 20 minutes to improve indoor air quality. If the
display shows FAN On Prog to indicate the program period
has the fan programmed to run, FAN Prog will override the
programmed setting until Run Schedule is pressed or the
next schedule period begins.
7) Repeat steps 2 through 6 until all of the program times
and temperatures are set for all program periods on
that day.
8) Press "Advance Day" to change to the next day and
repeat steps 2 through 8.
9) When programming is complete and all of the times and
temperatures match your desired heating schedule, press
Run Schedule. The thermostat will now run your program.
Enter the Cooling Program
1) Press the SYSTEM button until the Cool icon appears.
2) Follow Enter Heating Program instructions for entering
cooling times and temperatures.
8
| General | Details |
|---|---|
| Name | White Rodgers 1F95-1277 Big Blue Universal Thermostat Instruction Manual |
| Make | WHITE RODGERS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.4 MB |
(1 votes, average: 5.00 out of 5)
Loading...
White-Rodgers 1E78 Non Programmable Heat Only Thermostat User Manual
White-Rodgers 1F97-1277 Big Blue Single Stage Thermostat User Manual
White-Rodgers 1F56N-444 Thermostat User Manual
White-Rodgers 1F83-277 Heating & Air Conditioning Auto Changeover Heat Pump Thermostat User Manual
White-Rodgers M30 Thermostat Instruction Manual
WHITE-RODGERS 1F51N-619 Low Voltage Evaporative Cooler Thermostat Instruction Manual
White Rodgers 1F78-151 Non Programmable Thermostat Instructions
WHITE RODGERS 1F80-51 Programmable Electronic Digital Thermostat Instruction Manual
WHITE-RODGERS 1F86-0471 Blue Single 1 1 Stage Thermostat Instruction Manual
WHITE-RODGERS 1F90-71 5-Day 2-Day Electronic Digital Thermostat Instruction Manual
autani SMT-131 Wireless Digital Thermostat Installation Guide
VIMAR 02952 Well-Contact Plus Electronic Touchscreen Thermostat Instruction Manual
sygonix 2522212 Installable Thermostat Instruction Manual
GLOBAL Digital Heating Thermostat User Manual
TIME O STAT 2 Channel 3 Wired HMO Thermostat Installation Guide
Danfoss ECtemp Touch Electronic Intelligent Timer Thermostat Installation Guide
ENGO CONTROLS E55-B, E55-W Wi-Fi Thermostat User Guide
klima SF300 Thermostat User Manual
GENERAL LIFE HT250 RF Digital Room Thermostat User Manual
FURRION FACW10ESSA-BL Standard Single Zone Wall Thermostat User Guide