Home > WHITE RODGERS > WHITE RODGERS 1F80-51 Programmable Electronic Digital Thermostat Instruction Manual
WHITE RODGERS 1F80-51 Programmable Electronic Digital Thermostat Instruction Manual
1. Move SYSTEM switch to COOL position.
Cooling System
This thermostat has a built-in short-term (5-minute) time delay.
This feature is activated after the compressor shuts down and
the setpoint is changed within the 5-minute period. During this
5-minute period, COOL will flash on the display indicating that
the thermostat has locked out the compressor to allow head
pressure to stabilize. This thermostat does not sense AC power
loss and therefore does not activate the short term compressor
protection feature when power is restored.
2. Press
ture.Theblowershouldcomeonimmediatelyonhighspeed,
followed by cold air circulation
3. Press to adjust temperature setting above room tem-
perature. The cooling system should stop operating.
to adjust thermostat setting below room tempera-
CAUTION
!
Topreventcompressorand/orpropertydamage, ifthe
outdoor temperature is below 50°F, DO NOT operate
the cooling system.
OPERATION
Before you begin programming your thermostat, you should be
familiarwithitsfeaturesandwiththedisplayandthelocationand
operation of the thermostat buttons. Your thermostat consists of
two parts: the thermostat cover and the base. To remove the
cover, gently pull it straight out from the base. To replace the
cover, line up the cover with the base and press gently until the
cover snaps onto the base.
1
2
THE THERMOSTAT BASE
SET TIME VIEW PRGM RUN PRGM HOLD TEMP
FAN ON
AUTO
COOL OFF HEAT
Other than
and
, the following buttons and switches are
located behind the door on the bottom of the thermostat cover
(see fig. 11). Pull the door down to open it.
The Thermostat Buttons and Switches
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
(Red arrow) Raises temperature setting.
(Blue arrow) Lowers temperature setting.
9
10
MO TU WE TH FR
AM
SA SU
HEAT
SET TIME button.
11
COOL
BATTERY
HOLD
VIEW PRGM (program) button.
12
13
11 14 10
RUN PRGM (program) button.
HOLD TEMPerature button.
FAN switch (ON, AUTO).
Figure 11. Thermostat display, buttons, and switches
Alternately displays current time and temperature.
SYSTEM switch (COOL, OFF, HEAT).
11
12 BATTERY is displayed when the 3 “AA” batteries are low
The Display
and should be replaced. Nothing else will be displayed.
Indicates day of the week.
9
13
14
Displays currently programmed set temperature (this is
blank when SYSTEM switch is in the OFF position).
HEATisdisplayedwhentheSYSTEMswitchisintheHEAT
10
position. COOL is displayed (non-flashing) when the SYS-
TEM switch is in the COOL position. COOL is displayed
(flashing) when the compressor is in lockout mode.
The word HOLD is displayed when the thermostat is in the
HOLD mode.
4
| General | Details |
|---|---|
| Name | WHITE RODGERS 1F80-51 Programmable Electronic Digital Thermostat Instruction Manual |
| Make | WHITE RODGERS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.12 MB |

White-Rodgers 1E78 Non Programmable Heat Only Thermostat User Manual

White-Rodgers 1F97-1277 Big Blue Single Stage Thermostat User Manual

White-Rodgers 1F56N-444 Thermostat User Manual

White-Rodgers 1F83-277 Heating & Air Conditioning Auto Changeover Heat Pump Thermostat User Manual

White-Rodgers M30 Thermostat Instruction Manual

WHITE-RODGERS 1F51N-619 Low Voltage Evaporative Cooler Thermostat Instruction Manual

White Rodgers 1F78-151 Non Programmable Thermostat Instructions

WHITE-RODGERS 1F86-0471 Blue Single 1 1 Stage Thermostat Instruction Manual

WHITE-RODGERS 1F90-71 5-Day 2-Day Electronic Digital Thermostat Instruction Manual

WHITE-RODGERS 1F95-1277 Universal Thermostat Owner’s Manual



















