Home > WHITE RODGERS > White Rodgers 1F85CA-0471 Blue Universal Thermostat Instruction Manual
White Rodgers 1F85CA-0471 Blue Universal Thermostat Instruction Manual
INSTALLER/CONFIGURATION MENU
20) Comfort Alert with Active Protection – Turn this
feature ON to enable active protection. This allows the
thermostat to identify fault codes sent by the Comfort
Alert module when compressor damage is possible and
react to those codes by turning the compressor off. Fault
codes from the Comfort Alert module will flash on the
thermostat. (Refer to Comfort Alert Yellow Alert Codes
in Troubleshooting section.) If a Comfort Alert module is
not connected, or to disable active protection, turn this
feature OFF. If a Comfort Alert module is connected and
this feature is turned OFF, the thermostat will still receive
and flash the fault codes from the Comfort Alert module,
but the active protection will not be enabled to protect the
compressor.
22) Select Filter Replacement Reminder and Set Run
Time – Select the “Change Filter” reminder On or
OFF. If selected On, press MENU to select the time
period from 25 to 1975 hours in 25 hours increments.
In a typical system, 200 hours (default) of run time is
approximately 30 days. After the selected time of blower
operation, the thermostat will display “Change Filter”
as a reminder to change or clean your air filter. When
“Change Filter” is displayed, press MENU or RUN
SCHED button to clear the display and restart the time to
the next filter change.
23) Select Reversing Valve Output – The O/B option is
factory set at “O” position. This will accommodate the
majority of heat pump applications, which require the
changeover relay to be energized in COOL. If the
thermostat you are replacing or the heat pump being
installed with this thermostat requires a “B” terminal, to
energize the changeover relay in HEAT, the O/B option
should be set at “B” position.
21) Select Daylight Saving Time Calculation – Not
available on 1F83, this feature will allow the thermostat to
calculate the DST automatically and apply it to the Real
Time Clock display. Default On. Use
to select the feature OFF.
or
buttons
OPERATINGYOUR THERMOSTAT
IMPORTANT!
Choose the Fan Setting (Auto or On)
Press the FAN button to Auto or On.
Manual Operation for Non-Programmable
Mode
Press the SYSTEM button to select Heat or Cool and use
Fan Auto is the most commonly selected setting and runs the
fan only when the heating or cooling system is on.
Fan On runs the fan continuously for increased air circulation
or to allow additional air cleaning.
the
or
buttons to adjust the temperature to your
desired setting. After selecting your desired settings you can
also press the SYSTEM button to select AUTO to allow the
thermostat to automatically change between Heat and Cool.
Choose the System Setting
(Heat, Off, Cool, Auto, Emer)
Press the SYSTEM button to select:
Manual Operation (Bypassing the Program)
Programmable Thermostats
Press
or
and then the HOLD button and adjust the
Heat: Thermostat controls only the heating system.
Off: Heating and Cooling systems are off.
temperature wherever you like. This will override the program.
The HOLD feature bypasses the program and allows you
to adjust the temperature manually, as needed. Whatever
temperature you set in HOLD will be maintained 24 hours
a day, until you manually change the temperature or press
Run Sched to cancel HOLD and resume the programmed
schedule.
Cool: Thermostat controls only the cooling system.
Auto: Auto Changeover is used in areas where both heating
and cooling may be required on the same day. AUTO allows
the thermostat to automatically select heating or cooling
depending on the indoor temperature and the selected heat
and cool temperatures. When using AUTO, be sure to set the
Cooling temperatures more than 1° Fahrenheit higher than
the heating temperature.
Program Override (Temporary Override)
Press
or
buttons to adjust the temperature. This
Emer: (Heat Pump models) Thermostat controls only backup
heating system.
will override the temperature setting for four hours. To cancel
the temporary setting at any time and return to the program,
press Run Sched. If the SYSTEM button is pressed to select
AUTO the thermostat will change to Heat or Cool, whichever
ran last. If it switches to heat but you want cool, or it changes
to cool but you want heat, press both
simultaneously to change to the other mode.
and
buttons
PROGRAMMING (For Programmable Model Only)
Set Current Time and Date
1) Press Menu and then Time button once. The display
will show the hour only.
5) Additional presses of Time will advance the display
to show the year, month and date of month. Press the
or button to change the display to the correct
2) Press and hold either the
or
button until you
setting for each.
6) Press Run Sched to exit the Time mode.
reach the correct hour and AM/PM designation (AM
begins at midnight, PM begins at noon).
3) Press Time once again. The display window will show
the minutes only.
4) Press and hold either the
reach the correct minutes.
or
button until you
7
| General | Details |
|---|---|
| Name | White Rodgers 1F85CA-0471 Blue Universal Thermostat Instruction Manual |
| Make | WHITE RODGERS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.37 MB |
(1 votes, average: 5.00 out of 5)
Loading...
White-Rodgers 1E78 Non Programmable Heat Only Thermostat User Manual
White-Rodgers 1F97-1277 Big Blue Single Stage Thermostat User Manual
White-Rodgers 1F56N-444 Thermostat User Manual
White-Rodgers 1F83-277 Heating & Air Conditioning Auto Changeover Heat Pump Thermostat User Manual
White-Rodgers M30 Thermostat Instruction Manual
WHITE-RODGERS 1F51N-619 Low Voltage Evaporative Cooler Thermostat Instruction Manual
White Rodgers 1F78-151 Non Programmable Thermostat Instructions
WHITE RODGERS 1F80-51 Programmable Electronic Digital Thermostat Instruction Manual
WHITE-RODGERS 1F86-0471 Blue Single 1 1 Stage Thermostat Instruction Manual
WHITE-RODGERS 1F90-71 5-Day 2-Day Electronic Digital Thermostat Instruction Manual
SALUS SQ610RF Smart Thermostat Instruction Manual
HACH LT200 Dry Thermostat User Manual
GENERAL LIFE Senna 270S RF Wireless Room Thermostat User Manual
Danfoss TP5001B Programmable Room Thermostat User Guide
Moes WTP-BY-EU BHT-12 Smart Thermostat Instruction Manual
Vaillant VRC 700 Weather Compensating Thermostat Instruction Manual
Science Equip CH1920-001 Magnetic Stirrer Hot Plate Thermostat Instructions
Beca BHT-9000 Thermostat User Guide
aube technologies TH115-AF-GA Programmable Thermostat Owner’s Manual
DELTA DORE Tywell 2050 Thermostat D’Ambiance Radio Installation Guide