uponor D Plus RH T-247 BUS Smatrix Base Thermostat Instruction Manual
Item
Icon
Description
4.3 Main screen
The display below shows the main screen after activation:
C
Setpoint
D
E
F
G
H
I
High limitation of floor temperature
Low limitation of floor temperature
Control mode, Room temperature
sensor
CD0000795
Control mode, Room temperature
sensor and floor temperature
sensor
4.4 Change setpoint
On the main screen, pressing the – or + button for the first time will
switch the display from the main screen to the setpoint adjustment
screen, where the current setpoint value will be shown.
Control mode, Remote sensor
The change setpoint display could show any of the symbols listed
below:
Control mode, Room temperature
sensor and outdoor temperature
sensor
J
Outdoor temperature sensor
Floor temperature sensor
Relative humidity
K
L
CD0000788
The setpoint adjustment screen can display various icons, including
those for ECO/Comfort mode, Heating/Cooling, Demand/No
Demand, Regulation mode, and units. However, not all icons are
shown simultaneously; they appear according to the current system
status.
M
N
•
•
•
•
Pairing not ok
Communication lost
Pairing ok
Active communication
(flashes to indicate active
communication during run
mode)
When the – or + buttons are pressed, the setpoint adjusts in 0,5°
increments. Once the desired setpoint is selected, either pressing the
OK button or waiting for 10 seconds of inactivity will cause the display
to return to the main screen.
O
Temperature unit
4.5 Sensor readings
P
Q
R
S
Temperature
Settings menu
Calibration
Demand
This thermostat has a RH sensor that measures the room's relative
humidity. When the regulation mode is set to RFT or RO, an external
sensor measures a second temperature (floor temperature for RFT or
outdoor temperature for RO). To see the readings from the other
sensors, press the OK button on the main screen.
Regulation mode is RT or RS
OK
10 sec
of inactivity
T
Heating/cooling mode
Comfort/ECO mode
U
CD0000796
•
•
•
Only one temperature will be measured, which is already
displayed on the main screen.
When you press the OK button, the display switches from the
main screen to the humidity measurement screen.
After 10 seconds of inactivity, the display will automatically return
to the main screen.
|
|
Uponor Smatrix Base thermostat D+RH T-247 BUS Operation manual
7
| General | Details |
|---|---|
| Name | uponor D Plus RH T-247 BUS Smatrix Base Thermostat Instruction Manual |
| Make | uponor |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.4 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Uponor T-247 BUS Smatrix Base Thermostat Installation Guide
Uponor ETN4 Ecoflex Supra Standard Thermostat Instruction Manual
STEGO Type STO-STS 011 Mechanical Thermostat Instruction Manual
aube technologies CT230-120GA Slave and Master Thermostat Instruction Manual
ZigBee WiFi Series Water Heating Thermostat User Guide
COOKING PERFORMANCE GROUP 351030208 Retrofit Thermostat Instructions
beok BOT-T9N-WIFI Room Thermostat Instruction Manual
aube technologies TH110A-DP-P Thermostat User Manual
king K702E-2 SimplStat Electronic Thermostat Instruction Manual
NT NetX X5N-SM Thermostat Installation Guide
Danfoss CET B-RF ATC Cylinder Thermostat Installation Guide
GENERAL LIFE HT25 RF Wireless Room Thermostat User Manual