GENERAL LIFE HT300S RF Digital Room Thermostat User Manual

1

2

ProductDisplayLayout  

BATTERY PLACEMENT  

PAIRINGTHEROOMTHERMOSTATANDTHERECEIVER  

ENGLISH  



Primarily press the sync button of the Receiver for 2 seconds and see blinking  

greenlight oftheReceiver.  

7







While yourdeviceis turned off, pressand hold the"On/Off" button for 3 seconds.  

1

2

DIGITAL ROOM THERMOSTAT  

8

9

Pressthebutton until the“  

” menu appears.  

Press the “Up” or “Down” button of your Room Thermostat while the LED is  

flashing green.  

generallife.com.tr  





Ifthepairing issuccessful, thegreenflashing LEDon theReceiverwillbe steady.  

Receiverand Room Thermostathavebeen pairedto each other.  

10  

11  

12  

3

4

5

6

ROOMTHERMOSTATTEMPERATURECALIBRATION  

HT300S RF USER MANUAL  

Temperature sensors which are used in Room Thermostats are highly sensitive.  

You may need to calibrate your Room Thermostat if you would like to get the same  

temperaturevalueswithother thermometersin yourliving space.  

GENERALSPECIFICATIONS  





While yourdeviceis turned off, pressand hold the“On/Off“ button for 3 seconds.  

Press the "On/Off" button until the “ ” menu appears. In order to see the  

1

Hour Indicator  

HT300S RF is a wireless room thermostat. The user can get more comfortable and  

economic heating byadjusting theroomthermostatwiththerequiredtemperature.  

 Dailyand WeeklyProgramming  

Press the screwdriver forward from the space at the bottom of the Room  

Thermostat, bend the tabs and separate the front cover. Insert 2 new AAA alkaline  

batteries in the battery housing with the correct battery direction. Replace both  

batteries at the same time. Align the front part of your Room Thermostat with  

corresponding slot on the back, and then push gently until the thermostat snaps  

into place.  

2

Room Temperature  

Economy Mode  

Comfort Mode  

desired temperature, set the temperature difference by pressing the  

3

“Temperature Adjustment Buttons”. This value can be arranged between “-8° C"  

4

 DifferentMode Options (Comfort, Economy, Holiday)  

and “+8° C".  

5

Holiday Mode  

 Heating Calibration  

ON/OFFControl  

WirelessConnection  



In order to save the settings and exit, press the "On/Off" button until the device  

turns off.  

6

Weekly Program Mode  

Day Indicator  

Screen Lock  

 TPIAlgorithm  

PreciseTemperatureMeasurement  

7

8

Note:Recommended temperaturecalibration is “0.0°C”.  

Low Battery Warning: When the “  

” icon appears on the screen, it means “low  

HT300SRFand EQUIPMENTS  

9

10  

Battery Indicator  

Set Temperature  

Heating Indicator  

battery warning”. It is recommended to replace the batteries when this warning  

appears.  

FACTORY SETTINGS RESET  

HT300S RF  

Room Thermostat  

Holder  

Alkaline Battery  

You can reset your Room Thermostat to its default factory settings. This operation  

resets the mode temperature values, calibration setting and heating/cooling  

modes settings to factory setting. In order to reset your Room Thermostat to  

factory setting:  

Warning: When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be out of  

warranty. Pleasethrowyourdead batteriesinto thewastebin for batteries.  

11  

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

Cooling Indicator  







While yourdeviceis turned off, pressand hold the“On/Off” button for 3 seconds.  

Pressthe“On/Off” button untilthe“ ” menu appears.  

While in the “ ” menu, select the “ ” option by using the “Up” or “Down”  

buttons and pressthe“On/Off” button.  

Your devicewillbe turned off and resetto factory settings.  

12  

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

RECEIVERPLACEMENT  

The important things to note for the Receiver placement are  

avoiding physical contact between the Receiver and heating  

unit, and protecting it against materials such as liquid, dust  

etc.  

Dowels and Screws  

Receiver  

RECEIVER  



1-Manual Operation Button: Deactivates the  

Receiver and allows you to use heating/cooling  

unit manually.  

KEYLOCK  

In the Room Thermostat there is a key lock function to avoid any unintended  

contact.  

1

2

3

The devices should be placed in order to minimize the damage to the received and  

transmittedsignals bypayingattentiontothefollowingpoints;  

2-Pairing Button: Allows pairing the Receiver  

with the Room Thermostat.  

3-Receiver LED Light  

4-Receiver Power Cable Input  

5-Heating/Cooling Unit Connection Cable Input  

In order to unlock the Room Thermostat's key lock the “On/Off” button should be  

pressed for 3 seconds. If buttons on Room Thermostat are not touched for 10  

seconds, keylockwillbe reactivated.  





The devicesshould not be mounted on metalsurfaces.  

The devices should not be installed close to electrical cables and electronic  

equipment such ascomputers and televisionunits.  

TECHNICALDATA  

Room Thermostat  

DAY AND HOURSETTINGS  







The devices should not be installed near large metal structures or other building  

materialsusing finemetalmeshes such asspecialglass or specialconcrete.  

Distance between the Room Thermostat and the Receiver should not exceed 20  

metersor 2 floors.  







While your Room Thermostat is on, keep pressing the “Weekly Program” button  

for 3 seconds.  

Dimensions  

Operating Current  

85mm / 125mm / 20mm  

3V DC (2 x AAA alkaline battery)  

0.1^oC  

At the first screen that appears, hour part will be blinking. You may set the time  

withthe“Up”and “Down” buttons.  

Temperature Measurement Accuracy  

Operating Temperature Range  

Battery Life  

(5^oC) – (30^oC)  

Receivermust be installed atleast50cmawayfromtheheating/cooling unit.  

After setting the time, the “Heating & Cooling Option” button needs to be pressed  

once. For minute setting, minute part will be blinking. You mayset the minute with  

the“Up” and“Down” buttons.  

4

5

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

RECEIVERSETUP  

Operating Temperature  

Storage Temperature  

RECEIVERLEDDESCRIPTIONS  







First, shut down your heating/cooling unit and your heating/cooling unit's power  

sourcewithallelectricalcurrent(fuse, socketetc.)  

Steady Red  

Receiver has power but Receiver and Room Thermostat  



After setting the minute, the “Heating & Cooling Option” button needs to be  

pressedonce to setthedayof theweek.  

are not paired.  

As shown in the connection diagram, connect one end of the heating/cooling unit  

connection cableto theCOMand theother to theNO input of theReceiver.  

Connect the other ends of the cable -which you connected to the Receiver- to  

room thermostat connection terminal as shown in your heating/cooling unit's  

user manual.  

Receiver  

Blinking Green  

Steady Green  

Waiting for pairing signal from the Room Thermostat.  

Receiver and Room Thermostat are paired.  

Heating/cooling unit is not operating.  





Mondayhas setasthefirstdayof theweekand indicated withnumber“1".  

Numbers indicate the following days respectively 2-Tuesday, 3-Wednesday,  

4-Thursday, 5-Friday, 6-Saturdayand 7-Sunday  

Dimensions  

Operating Current  

Relay NO Switching Current  

90mm / 90mm / 25mm  

230V AC  

7A (240VAC – Resistive Load)  

10A (120VAC – Resistive Load)  

(-20^oC) – (+60^oC)  

3 Short Orange Blinking Operate the heating/cooling unit signal has reached to  

the Receiver.  



When setting is done, you may exit by pressing the “Weekly Program” button for 3  

seconds.  







You must first connect the Receiver power cable to the Receiver and then to the  

fuse which theheating/cooling unit is connected.  

Storage Temperature  

Steady Orange  

Heating/cooling unit is operating.  

3 Short Green Blinking  

Shut the heating/cooling unit down signal has reached  

to the Receiver.  

MODESETTING  

MODES  

After completing the cable connection process, firstly turn on your fuse and then  

yourheating/cooling unit.  

ROOMTHERMOSTAT  

ButtonFunctions  

Blinking Orange  

Blinking Red  

Heating/Cooling unit operates in manual mode.  

Receiver did not get any signal from the Room  

Thermostat for 22 minutes or longer.  

Heating/cooling unit has shut down.  

By pressing the Receiver's manual usage button for 2 seconds, you should see  

the Orange Light blinking on the Receiver. In this way, after making sure that the  

heating/cooling unit is operating, press the same button again for 2 seconds and  

seethattheOrange LEDturns off.  

PRESET MODES  

WEEKLY  

PROGRAM  

MODE  

MANUAL MODE  

1

2

Comfort  

Mode  

Economy  

Mode  

Holiday  

Mode  

ROOMTHERMOSTATPLACEMENT  



Setup theRoom Thermostatto pair theReceiverwiththeRoom Thermostat.  

Room Thermostat needs to be placed in the room which is used most frequently.  

For instance; living room or lounge. Placing the Room Thermostat in a spot that  

have air circulation like entrance of a room or side of window should be avoided.  

Also anywhere close to heating/cooling units such as radiator, stove and spots  

which get direct sun lights would not be suitable. Room Thermostat needs to be  

locatedabovethefloor 150cmheight.  

3

4

5

6

Your Room Thermostat has 5 different modes. 3 of them (Comfort, Economy and  

Holiday Mode) are preset modes. Other modes are manual mode and weekly  

programmode.  

RECEIVERWIRINGDIAGRAM  

AC  

(230V)  

COM  

NO  

In preset modes, temperature values are based on user's choices which have been  

set in the beginning. Manual mode allows the Room Thermostat to operate within  

the temperature which is required and set directly by user. Weekly Program mode  

continues to workaccordingto theweeklyschedule determined bytheuser.  

In orderto change thetemperaturevaluesof presetmodes:  

1

2

3

4

5

6

Weekly Program Button  

Temperature Adjustment Button (To Increase)  

Heating & Cooling Option  

min. 20 cm  







Press and hold the “Mode” button for 3 seconds while your Room Thermostat is  

on.  

Comfort Mode temperature value will appear. You may adjust the temperature  

valueof Comfort Mode bypressingthe“Up” and “Down”buttons.  

When setting is done, you may adjust the temperature value of Economy Mode  

withthe“Up” and “Down”buttons bypressingthe“Mode”button again.  

You mayexitthesettingscreenbypressingthe“Mode”button 3 seconds.  

In orderto change the manual mode temperature, pressthe “Up” or “Down”button  

while in the main screen. The Room Thermostat will switch to Manual Mode once  

pressedthe“Up” or “Down”button.  

Temperature Adjustment Button (To Decrease)  

Mode Button  

On/Off Button – Unlock Button  

HEATING/COOLING UNIT  

Warning!  





Operations within the heating unit or the electrical installation must be carried out  

byprofessionally qualified persons.  



You maypressthe“Mode”button to switchto theother modes.  

4

1

2

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE HT300S RF Digital Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.14 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE HT300S RF Digital Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Product display layout Battery placement Pairing the room thermostat and the receiver Press the sync button of the receiver for 2 seconds to see the blinking green light. If the pairing is successful, the green flashing LED on the receiver will be steady. Temperature sensors in room thermostats are highly sensitive and may require calibration. HT300S RF is a wireless room thermostat that allows for comfortable and economic heating. The devices should not be installed close to electrical cables and electronic equipment. You can reset your room thermostat to its default factory settings. The receiver must be installed at least 50 cm away from the heating/cooling unit.
• Page 2: You may set the operating schedule of your room thermostat with a weekly program. The warranty period starts from the invoice date and is warranted against manufacturing defects for 5 years. Your room thermostat takes the average room temperature of the last 40 seconds as a basis. With the TPI algorithm, it learns how long it takes to reach the desired room temperature and how this temperature is maintained. Seven different temperature values can be set for each day in weekly programming. In order to set the weekly schedule, press and hold the “Weekly Program” button for 3 seconds while your room thermostat is on. Press the “Up” button once if you wish to set the same schedule for the weekdays. If the placement of the TPI room thermostats is changed, the learning process will restart. Malfunctions resulting from the use of devices contrary to the user manual are not covered by the warranty. The customer can make complaints and appeals to consumer courts or consumer arbitration committees.