uponor D Plus RH T-247 BUS Smatrix Base Thermostat Instruction Manual
Regulation mode is RFT
Control mode
Caution!
The thermostat control mode must be set before the
OK
thermostat is registered to the room controller.
10 sec
of inactivity
To make subsequent changes to this setting, you must
register the thermostat again.
Note
OK
or
10 sec
of inactivity
While in a submenu, if no button on the thermostat is
pushed for approximately 10 seconds, the current values
will be saved, and the software will return to the settings
menu. Approximately 10 seconds later, the software will
return to main screen.
OK
CD0000797
The thermostat has four different control modes. These modes can
be set in the settings menu.
•
•
External sensor measures the floor temperature.
Display
Display text
Thermostat function
The room temperature, measured by the internal sensor, is
already displayed on the main screen.
RT
Room temperature sensor
•
•
When you press the OK button, the display switches from the
main screen to the floor temperature screen. Pressing the OK
button again will take you to the humidity measurement screen.
RFT
RS
Room temperature sensor and
floor temperature sensor
After 10 seconds of inactivity, the display will automatically return
to the main screen.
Remote sensor
Regulation mode is RO
RO
Room temperature sensor and
outdoor temperature sensor
OK
10 sec
of inactivity
Thermostat settings
Note
OK
or
10 sec
of inactivity
While in a submenu, if no button on the thermostat is
pushed for approximately 8 seconds, the current values
will be saved, and the software will return to the settings
menu. Approximately 60 seconds later, the software will
return to main screen.
OK
All the parameters for thermostat operation can be set in this menu.
CD0000798
•
•
External sensor measures the outdoor temperature.
The room temperature, measured by the internal sensor, is
already displayed on the main screen.
•
When you press the OK button, the display switches from the
main screen to the outdoor temperature screen. Pressing the
OK button again will take you to the humidity measurement
screen.
•
After 10 seconds of inactivity, the display will automatically return
to the main screen.
4.6 Digital thermostat functions
Run mode
The thermostat is in run mode during normal operation.
The display turns off after 20 seconds of inactivity and can only be
reactivated by pressing a button.
|
|
8
Uponor Smatrix Base thermostat D+RH T-247 BUS Operation manual
| General | Details |
|---|---|
| Name | uponor D Plus RH T-247 BUS Smatrix Base Thermostat Instruction Manual |
| Make | uponor |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.4 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Uponor T-247 BUS Smatrix Base Thermostat Installation Guide
Uponor ETN4 Ecoflex Supra Standard Thermostat Instruction Manual
MYSON Unisenza Dial Thermostat User Manual
e l m leblanc TRL 7.26 RF Room Thermostat User Manual
TR33 Large LCD Screen Smart Thermostat Instruction Manual
EMOS P5601UF Floor Heating Thermostat User Manual
EZAIoT 723 IPS Wired Smart Thermostat Instruction Manual
REHAU 13280001001 Thermostat Installation Guide
Honeywell Home DT4R Wireless Room Thermostat User Guide
NT NetX X-Series Thermostat Installation Guide
Danfoss MBC 8000, MBC 8100 Heavy Duty Thermostat Installation Guide
Honeywell Home FocusPRO S200 Smart Thermostat User Manual