OH-1202H Universal Humidity Touchscreen Thermostat Instruction Manual
PROGRAMMING
Fill in the blank schedule on the next page then:
Set Current Time and Day
1. Press Menu key to enter installer menu. Then press
Set Time once to indicate hour & AM or PM designation
in clock display.
Enter the Heating Program
1. Press the Menu key and then press Set Schedule. Press
SYSTEM key to select "Heat" in the system switch area
indicating the active mode being programmed.You can
switch to the other mode by pressing the system switch at
any time.
2. The top of the display will show the day(s) being pro-
grammed. The time and set at temperature are also
displayed. "Morning" will also be displayed to indicate
the period.
2. Press and hold either the
reach the correct hour and AM or PM designation.
or
touch key until you
3. Press Set Time again to display minutes only in clock
display.
4. Press and hold either the
reach the correct minutes.
or
touch keys until you
5
.
P
r
e
s
s
S
e
t
T
i
m
e
o
n
c
e
a
g
a
i
n
t
o
d
i
s
p
l
a
y
y
e
a
r
.
3. Press
or
selected temperature for the 1st heating period (Morning).
key to change the temperature to your
6. Press either the
correct year.
or
t
o
u
c
h
k
e
y
u
n
t
i
l
y
o
u
r
e
a
c
h
t
h
e
4. Press or key to adjust the start time for period.
The time will change in 15 minute increments.
7. Press Set Time once again to display month.
8. Press either the
correct month.
or
touch key until you reach the
5. Press FAN to select Auto or Prog.
6. After you have set the time and the temperature for the
period to begin, press Set Schedule to advance to the
next program period.
9. Press Set Time once again to display date of the month
along with day of the week at top row (which is automatic).
10. Press and hold either the
or
touch key until you
7. Repeat steps 2 through 6 until all of the program times
and temperatures are set for all program periods on
that day.
reach the correct day of the month and day of the week
displayed at the top row.
11. Press Run Schedule once or twice to remove the key.
Now the display will show the correct time and room tem-
perature.
8. Press "Advance Day" to change to the next day and
repeat steps 2 through 8.
9. When programming is complete and all of the times and
temperatures match your desired heating schedule,
press Run Schedule. The thermostat will now run your
program.
Automatic Daylight Saving Calculation
The Real Time Clock will adjust automatically for daylight sav-
ings time, in the following manner:
Enter the Cooling Program
Increment one hour at 2 AM on the second Sunday of March
and decrement one hour at 2 AM on the first Sunday of
November.
1. Press the SYSTEM key until the "Cool" icon appears.
2. Follow Enter Heating Program instructions for entering
cooling times and temperatures.
The daylight saving feature can be enabled or disabled in
installer configuration menu. Default is DS ON (enabled).
After entering installer configuration mode, momentarily
press touch key until the display indicates dS (in actual tem-
Automatic Schedule
Auto Schedule Heat is a fast way to program all the heating
temperatures during the day to a comfortable temperature
and then lower the temperature 6° at night. Auto Schedule
Cool will program all of the cooling time periods to the same
temperature.
perature digits) and on (default – in clock digits).
keys will toggle display and operation from on to OFF.
and
Programming Tip: Copy Program
When programming your thermostat, you may copy the pro-
gram from one day to another day or group of days using the
Copy key. In 7 day programming mode, a day can be copied
to another day or all six other days. In 5+1+1 day program-
ming mode the weekday (Mon – Fri) program can be copied
into Sat and Sun or either Sat or Sun.
Note: Auto Schedule is available only when the thermostat
is first powered on, after the thermostat has been reset, or
anytime you turn AS on in the Configuration Menu (item 17
AS Heat or 18 AS Cool). After use in heating and cooling,
Auto Schedule on the display will change to Humidity.
H
e
a
t
i
n
g
E
x
a
m
p
l
e
:
To copy a program from one day to another:
1. In Heat mode, press Auto Schedule once.
1. In Set Schedule mode, enter the program for the day or
select the day you wish to copy by pressing Advance Day.
2. Press
or
ture (example 72°).
to select a comfortable day time tempera-
2. Press Copy. The display will show “Copy” next to the
SYSTEM key and the day of the week that will be copied.
3. Press Auto Schedule again.Your thermostat is now pro-
grammed for 72° from 6:30 AM until 10:30 PM at 72°. At
10:30 PM, your thermostat will set back 6° to 66°.
3. Press Advance Day. The day being copied will be indi-
cated and the other days will be flashing.
Your heating program for each day of the week will look like
this:
4. If you wish to copy to all days skip to next step or press
Advance Day until the day you wish to copy to is flashing.
6:30
8:00
72°
72°
72°
66°
5. Press Copy. “Copy” will disappear, the day you copied
from will disappear and the day(s) you copied to will be on.
5:00
10:30
6. If you wish to copy this same program into other days,
press Copy and repeat steps 3, 4 and 5.
7. Press Run Schedule to return to normal operation.
12
| General | Details |
|---|---|
| Name | OH-1202H Universal Humidity Touchscreen Thermostat Instruction Manual |
| Make | OH |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.42 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH 8750000270 Radiator Thermostat II Smart Home Radiator Thermostat Instructions
Drayton 22902 Programmable 2 Channel Room Thermostat Installation Guide
REHAU NEA H 24 V Room Thermostat Instruction Manual
GENERAL LIFE MITRA 250 RF Digital Room Thermostat User Manual
ESi Controls ESRTERFW Wireless Digital Room Thermostat Installation Guide
SALUS FC600 Fan Coil Thermostat User Guide
Kaysun KC-FC-XT Fan Coil Thermostat Owner’s Manual
ALARM ADC-T25 Smart Thermostat Installation Guide
Honeywell T834 Series Thermostat Owner’s Manual
SALUS CONTROLS BTR230 Non Programmable Thermostat User Guide