Home > Micro-Air > Micro-Air 351 Air Conditioner Digital Thermostat User Guide

Micro-Air 351 Air Conditioner Digital Thermostat User Guide

EasyTouch RV 351  
Smart-Device Application Features  
Check for Updates  
Checks to see if any updates are available for the display. The smart device application must have  
internet and the display must be connected to Wi-Fi with a green Wi-Fi symbol. Tap Check for  
Updates and follow the prompts.  
Note: Beta updates may be available from time to time, but these are for people working with Micro-  
Air in testing them. Some features may not work as expected. The current version firmware can be  
restored by checking for updates again.  
Notifications  
Notifications provide a way for the user to monitor the temperature in the space using notification  
limits. Limits are set by connecting to the display in the app, selecting the settings gear, and then  
selecting notifications. A minimum and maximum allowed temperature can be set. Table 6 shows  
an example of operation with an 80°F maximum temperature set.  
A Notification will be sent for each degree it rises above the maximum temperature. If temperature  
drops, no notification will be sent unless the temperature exceeds the last maximum temperature  
again (82 in the example). If the temperature drops two degrees below the set maximum, (78 in the  
example) it will again alert for each degree above the set maximum. This behavior helps avoid  
nuisance notifications to your smart device. The same occurs in the opposite direction for the lower  
limit.  
Temperature  
Action  
(°F)  
80  
81  
82  
Send first notification  
Send another notification  
Send another notification  
Temperature drops, no  
notification  
81…79  
78  
Max temp resets  
Table 6 - Push Notifications Operation Example  
Edit Wi-Fi Settings or Connect to Wi-Fi  
This is where you will make the connection from the display to the internet. See section Connecting  
to a New Wi-Fi Network for details on how to use this feature. The app must be connected to the  
display over Bluetooth to see this option.  
Refresh Configuration  
This setting resets the saved configuration in the app if a configuration change is made at the display.  
If there is a difference between the modes and zones available on the app compared to the display  
then press this button to sync the app to the display. First time connection will grab the correct  
settings but activate this setting to force the sync.  
22  
©2024 Micro-Air LLC  
Revision 2.0  
       
GeneralDetails
NameMicro-Air 351 Air Conditioner Digital Thermostat User Guide
MakeMicro-Air
LanguageEnglish
FiletypePDF (Download)
File size0.6 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual
micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual
Micro-Air 359 Touchscreen Thermostat Instruction Manual
Micro-Air 359 Touchscreen Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Thermostat Instruction Manual
micro-Air EasyTouch RV 351 Thermostat User Manual
micro-Air EasyTouch RV 351 Thermostat User Manual
Micro Air ETRV EasyTouch RV Thermostat Instruction Manual
Micro Air ETRV EasyTouch RV Thermostat Instruction Manual
micro-air EasyTouch RV 356 True Air RV Thermostat User Manual
micro-air EasyTouch RV 356 True Air RV Thermostat User Manual
micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual
micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual
micro-Air EasyTouch 352 Thermostat User Manual
micro-Air EasyTouch 352 Thermostat User Manual
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual

Micro-Air 351 Air Conditioner Digital Thermostat User Guide