Micro-Air 351 Air Conditioner Digital Thermostat User Guide
EasyTouch RV 351
An Appliance is Not Operating as Expected
You may configure the system to start to heat or cool the space and appliances are not turning on or
off as you expect. The system’s logic is largely determined by the A/C control board that is the same.
This means that appliance operation is largely identical to the OEM display operation. Practically
speaking, the display tells the control board the mode and setpoint and the control board does the
rest. Use this section if you have trouble getting the system to heat and cool as expected.
It is best to address these issues from the display directly to isolate any issue from use of the app.
•
•
•
Make sure you have the latest display software. See section Updating The EasyTouch RV Display
for more details.
If the electric fan for the A/C is what is odd then use the fan button to set the fan speed
appropriately and understand when it should run.
Is the ambient temperature drawn in white? The ambient temperature color is how the display
shows whether a cycle is active or not and is a direct signal from the A/C control board that is
powering the appliances. White means a cycle is inactive. Make sure the software is set correctly
to call for a cycle.
o
o
o
Tap the mode button, then the power button to green and tap the desired mode, such as
the cool mode.
Tap the fan button to the desired fan mode. Set the speed appropriately and understand
when the electric fan should run.
Tap the setpoint button to the desired temperature. For example, in cool mode the
setpoint must be less than the ambient temperature to start a cycle.
▪
▪
expected as it affects when a cycle will start.
o
messages will not allow a cycle to start.
•
Is the ambient temperature drawn in color (blue or red)? This means the A/C control board is
actively powering the appropriate appliances for the mode and the cycle is active. This is a signal
directly from the control board that allows EasyTouch RV to draw the color.
o
If an appliance is not running when the cycle is active then it is likely an issue outside
EasyTouch RV. Appliances are connected to the control board to turn on and off. The
appliance may need to be serviced and the A/C control board verified that it is sending
the appropriate signals (when the cycle is active). An RV shop is recommended to
troubleshoot these parts of the system. Micro-Air cannot assist with troubleshooting
non-display related issues.
26
©2024 Micro-Air LLC
Revision 2.0
| General | Details |
|---|---|
| Name | Micro-Air 351 Air Conditioner Digital Thermostat User Guide |
| Make | Micro-Air |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.6 MB |
(1 votes, average: 5.00 out of 5)
Loading...
micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual
Micro-Air 359 Touchscreen Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Thermostat Instruction Manual
micro-Air EasyTouch RV 351 Thermostat User Manual
Micro Air ETRV EasyTouch RV Thermostat Instruction Manual
micro-air EasyTouch RV 356 True Air RV Thermostat User Manual
micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual
micro-Air EasyTouch 352 Thermostat User Manual
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
GENERAL LIFE FH104 Underfloor Heating Thermostat User Manual
Thermafloor HT1 Thermostat White App Electric Mat Thermostat User Guide
Carrier EB-STATE3LTICB-01 lLite Smart Thermostat Instructions
beca BAC-003 Series WiFi Thermostat Fan Coil User Guide
GENERAL LIFE ARUNA 301S Digital Room Thermostat User Manual
RITTAL SK 3114.200 Digital Enclosure Internal Temperature Display and Thermostat Instructions
MODINE 5-580.4 Programmable Room Thermostat Installation Guide
KONIGHAUS Remote Infrared Heater Plus Thermostat User Guide
LUX PSP511Ca Programmable Thermostat Instruction Manual
EBECO EB-Therm 500 Floor Heating Thermostat Instruction Manual