MODINE 5-580.4 Programmable Room Thermostat Installation Guide

1

2

5-580.4  

5H0762650000  

March, 2024  

INSTALLATION INSTRUCTIONS  

programmable room thermostat  

gas-fired duct furnace/make-up air units  

Model Series: “D”,”H”,”I”, & “O”  

Figure 1.1 – Room Programmable Thermostat  

WARNING  

1. Disconnect power supply before making wiring  

connections or working on this equipment. Folllow all  

applicable safety procedures to prevent accidental  

power up. Failure to do so can result in injury or death  

from electrical shock or moving parts and may cause  

equipment damage.  

2. All appliances must be wired strictly in accordance  

with wiring diagram furnished with the appliance. Any  

wiring different from the wiring diagram could result in  

a hazard to persons and property.  

3. All wiring must be done with a wiring material having  

a remperature rating of at least 105°C.  

IMPORTANT  

1. The use of this manual is specifically intended for a  

qualified installation and service agency. A qualified  

installation and service agency must perform all  

installation and service of these appliances.  

2. Modine manuals may contain excerpts from  

component supplier literature adapted for Modine  

products. Any accompanying component supplier  

literature is for general information.  

Table 1.1—Specifications  

Model Number:  

Model Description:  

Hardwire Power:  

Battery Power:  

1F95-1280  

Programmable room thermostat  

20-30 VAC  

2 AA batteries  

Application  

1.5A per terminal, 2.5A max  

between all terminals.  

Terminal Load:  

Set Point Range:  

Dimensions:  

Emerson 1F95-1280 is a mercury free thermostat with  

damper control and automatic heat/cool changeover option  

that allows users to keep temperatures in a comfortable  

range. Seven day programming makes heating or cooling a  

space more efficient.  

45˚F to 99˚F (7˚C to 37˚C)  

4-9/16"H x 5-13/16"W x 1-  

3/16"D  

Output:  

4-20mA (max 500Ω)  

Features  

Humidity Limits:  

90% RH Non-Condensing  

32˚F to 105˚F (0˚C to 41˚C)  

Fast 1.2˚F ; Slow 1.7˚F  

Fast 0.6˚F ; Slow 1.5˚F  

Room Programmable thermostat includes:  

Temperature Limits:  

Rated Differentials Cool:  

Rated Differentials Heat:  











Automatic or manual fan operation.  

Automatic or manual heat/cool switching capabilities.  

Celsius or Fahrenheit Temperature display.  

Copy Feature for fast programming.  

Temperature override (for temporary or continuous  

override).  

Contents  









Thermostat (body and base)  

2 “AA” Alkaline batteries  

2 mounting screws  





Automatic daylight savings setting.  

Total or partial (limited temperature range) keypad  

lockout with combination.  

2 plastic screw anchors  





Built-in Short Cycle equipment protection setting.  

Occupied/Unoccupied damper control.  

THIS MANUAL IS THE PROPERTY OF THE OWNER.  

PLEASE BE SURE TO LEAVE IT WITH THE OWNER WHEN YOU LEAVE THE JOB.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	MODINE 5-580.4 Programmable Room Thermostat Installation Guide
Make	Modine
Language	English
Filetype	PDF (Download)
File size	0.14 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Modine

MODINE 5-580.4 Programmable Room Thermostat Installation Guide Overview

Summary of Contents

• Page 1: Installation instructions for programmable room thermostat for gas-fired duct furnace/make-up air units. Disconnect power supply before making wiring connections or working on this equipment to prevent injury or death. All appliances must be wired strictly in accordance with the wiring diagram furnished with the appliance. Wiring must be done with a material having a temperature rating of at least 105°C. The use of this manual is specifically intended for a qualified installation and service agency. Emerson 1F95-1280 is a mercury-free thermostat with damper control and automatic heat/cool changeover option. Seven-day programming makes heating or cooling a space more efficient. Temperature set point range is 45˚F to 99˚F (7˚C to 37˚C). Features include automatic or manual fan operation and temperature override. Contents include thermostat body and base, batteries, mounting screws, and plastic screw anchors.
• Page 2: Installation Pull the thermostat body off of the thermostat base. Caution: Forcing or prying on the thermostat will cause damage to the unit. Place base over hole in wall and mark mounting hole locations in the wall using the base as a template. Connect wires to terminal block on base using appropriate wiring schematic. Push excess wire into wall and plug hole with a fire resistant material to prevent drafts from affecting thermostat operation. Configuration menu settings can be accessed from the main screen by selecting “Menu” and holding down “Installer Config.” Confirm the following settings are selected: SCREEN #1 – SET TO “MS2,” SCREEN #2 – SET TO “ELE,” SCREEN #37 – SET TO “OFF.” Wiring installation must conform with local building codes or the National Electric Code ANSI/NFPA 70 - Latest Edition. Battery location includes (2) “AA” alkaline batteries included in the thermostat at the factory. Power stealing switches should be left in the On position to run the thermostat off of the 24 volt transformer with a battery backup.