Honeywell TH6320ZW2003 Pro Z-Wave Programmable Thermostat Installation Guide
# ISU
ISU Name
ISU Options (defaults in bold)
Notes
365
Cool 1 CPH (Cooling 1 - 6 CPH (3 CPH)
cycle rate stage 1)
This ISU is only displayed when Cool /Compressor Stages is set to 1 or more stages. Cycle rate limits the maxi-
mum number of times the system can cycle in a 1 hour period measured at a 50% load. For example, when set
to 3 CPH, at a 50% load, the most the system will cycle 3 times per hour (10 minutes on, 10 minutes off). The
system cycles less often when load conditions are less than or greater than a 50% load.
366
370
Cool 2 CPH (Cooling 1 - 6 CPH (3 CPH)
cycle rate stage 2)
This ISU is only displayed when Cool /Compressor Stages is set to 2.
Heat 1 CPH (Heating 1 - 12 CPH
cycle rate stage 1)
This ISU is only displayed when Heat Stages is set to 1 stage or more stages. Cycle rate limits the maximum
number of times the system can cycle in a 1 hour period measured at a 50% load. For example, when set to 3
CPH, at a 50% load, the most the system will cycle is 3 times per hour (10 minutes on, 10 minutes off). The
system cycles less often when load conditions are less than or greater than a 50% load. The recommended
(default) cycle rate settings are below for each heating equipment type:
Standard Efficiency Gas Forced Air = 5 CPH; High Efficiency Gas Forced Air = 3 CPH; Oil Forced Air =
5 CPH; Electric Forced Air = 9 CPH; Fan Coil = 3 CPH; Hot Water Radiant Heat = 3 CPH; Steam = 1 CPH.
371
375
378
Heat 2 CPH (Heating 1 - 12 CPH
cycle rate stage 2)
This ISU is only displayed when Heat Stages is set to 2 stages. The recommended (default) cycle rate settings
are below for each heating equipment type:
Standard Efficiency Gas Forced Air = 5 CPH; High Efficiency Gas Forced Air = 3 CPH; Oil Forced Air =
5 CPH; Electric Forced Air = 9 CPH; Fan Coil = 3 CPH; Hot Water Radiant Heat = 3 CPH; Steam = 1 CPH.
Aux Heat CPH
1 - 12 CPH
This ISU is only displayed when ISU 200 = Heat Pump and ISU 221=1. It is only displayed when Auxiliary Heat
is configured. The recommended cycle rate settings are below for each heating equipment type:
Standard Efficiency Gas Forced Air = 5 CPH; High Efficiency Gas Forced Air = 3 CPH; Oil Forced Air =
5 CPH; Electric Forced Air = 9 CPH
(Heating cycle rate
Auxiliary Heat)
EM Heat CPH
1 - 12 CPH
This ISU is only displayed when Emergency Heat is configured and ISU 253: Aux/E Terminal Control is set to
control Aux and E heat Independently. The recommended cycle rate settings are below for each heating equip-
ment type:
(Heating cycle rate
Emergency Heat)
Standard Efficiency Gas Forced Air = 5 CPH; High Efficiency Gas Forced Air = 3 CPH; Oil Forced Air =
5 CPH; Electric Forced Air = 9 CPH.
387
Compressor
Protection
Off, 1 - 5 minutes
The thermostat has a built in compressor protection (minimum off timer) that prevents the compressor from
restarting too early after a shutdown. The minimum-off timer is activated after the compressor turns off. If
there is a call during the minimum-off timer, the thermostat shows “Cool on” or “Heat On” (heat pump) status
blinking on the thermostat home screen. This ISU is displayed if ISU 220 is set to at least 1 stage.
390
391
Ext Fan Run Time
in Cool
Off, 30, 60, 90 seconds
2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 minutes
After the call for cooling ends, the thermostat keeps the fan on for the selected amount of time for increased
efficiency. This may reintroduce humidity into the living space. This ISU is displayed if ISU 220 is set to at least
1 stage.
Ext Fan Run Time
in Heat
Off, 30, 60, 90 seconds
2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 minutes
After the call for heating ends, the thermostat keeps the fan on for the selected amount of time for increased
efficiency. This ISU is displayed if ISU 230 is set to Thermostat Controls Fan.
| General | Details |
|---|---|
| Name | Honeywell TH6320ZW2003 Pro Z-Wave Programmable Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.34 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Aprilaire S86WMUPR Programmable Wi-Fi Multi Stage Universal Thermostat Installation Guide
AIRQUEST TSTATIIEWF ION Gray Smart Thermostat Owner’s Manual
vtech T961 Wired Thermostat Owner’s Manual
Haswill Electronics RC-113M PID Thermostat User Guide
Stelpro STE362RNP Electronic Thermostat User Guide
BEOK BOT-R6X Wireless Gas Boiler Thermostat User Manual
SIEMENS RDG260KN Room Thermostat Instruction Manual
ESi Controls ESRTERFW Wireless Digital Room Thermostat Installation Guide
Danfoss DEVIreg 330 Electronic Thermostat Installation Guide
expert4house BHT-2000 Series Zigbee Thermostat User Guide