Honeywell TH6320ZW2003 Pro Z-Wave Programmable Thermostat Installation Guide
Wiring heat pump systems
1H/1C Heat Pump System
3H/2C Heat Pump System [10]
Power [1]
Rc [R+Rc joined by Slider Tab] [2]
R
Power [1]
R
Rc [R+Rc joined by Slider Tab] [2]
Y
Compressor contactor
Y
Compressor contactor (stage 1)
C
24 VAC common [3]
C
24 VAC common [3]
O/B Changeover valve [7]
Fan relay
O/B Changeover valve [7]
Fan relay
Aux Auxiliary heat [4]
Emergency heat relay [4]
Y2 Compressor contactor (stage 2)
Heat pump fault input
G
G
2H/1C Heat Pump System [8]
Power [1]
Rc [R+Rc joined by Slider Tab] [2]
E
R
L
Y
Compressor contactor
C
24 VAC common [3]
Dual Fuel System
Power [1]
Rc [R+Rc joined by Slider Tab] [2]
O/B Changeover valve [7]
Fan relay
Aux Auxiliary heat [4]
R
G
Y
Compressor contactor (stage 1)
E
L
Emergency heat relay [4]
Heat pump fault input
C
24 VAC common [3]
O/B Changeover valve [7]
Fan relay
Aux Auxiliary heat [4]
Emergency heat relay [4]
G
2H/2C Heat Pump System [6]
Power [1]
Rc [R+Rc joined by Slider Tab] [2]
R
E
Y2 Compressor contactor (stage 2 - if
Y
Compressor contactor (stage 1)
needed)
C
24 VAC common [3]
L
S
S
Heat pump fault input
Outdoor sensor
Outdoor sensor
O/B Changeover valve [7]
Fan relay
Y2 Compressor contactor (stage 2)
Heat pump fault input
G
L
NOTES:
• Do NOT use W for heat pump applications. Auxiliary heat must wire to AUX or E.
• Available wiring configurations may differ by product models/product numbers.
• Wire specifications: Use 18- to 22-gauge thermostat wire. Shielded cable is not required.
[1] Power supply. Provide disconnect means and
[7] In Installer Setup Options (ISU), set Reversing
overload protection as required.
Valve to O/B on Cool (for cool changeover) or
to O/B on Heat (for heat changeover).
[2] Move R-Slider Tab on UWP to the R setting. For
more information, see "Setting Slider Tabs" on
page 5.
[8] In Installer Setup Options (ISU), set heat sys-
tem type to Heat Pump. Set compressor stages
to 1, and set Aux/E stages to 1.
[3] Optional 24 VAC common connection.
[10] In Installer Setup Options (ISU), set system type
to Heat Pump, set compressor stages to 2, and
set Aux/E stages to 1.
[4] If you do not have separate wires for the Aux
and E terminals, connect the wire to the Aux
terminal.
[6] In Installer Setup Options (ISU), set system type
to Heat Pump. Set compressor stages to 2, and
set Aux/E stages to 0.
7
| General | Details |
|---|---|
| Name | Honeywell TH6320ZW2003 Pro Z-Wave Programmable Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.34 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
SKYTECH 5320P Programmable Thermostat Fireplace Remote Control Instruction Manual
GENERAL 260S Wired Room Thermostat User Manual
GENERAL LIFE MITRA 220 Smart Room Thermostat User Manual
qunda QD-HVAC15 WIFI Touch-Screen Programmable Thermostat Instruction Manual
resideo TH2110WF4008 Smart Thermostat User Guide
tuya MTS700N Wireless Thermostat User Manual
Livn 147 Thermostat User Guide
YOLINK YS4003-UC Smart Thermostat User Guide
Gelia ip24 1.5m Cable With Stepless Thermostat Instruction Manual
EPH CONTROLS RDT Recessed Room Thermostat Installation Guide