Honeywell TH6320ZW2003 Pro Z-Wave Programmable Thermostat Installation Guide
Alerts and reminders
Number Alert/Reminder Definition
252
AC Power Lost
If batteries used as backup power it would drain
batteries quickly so Z-Wave communication needs
to be turned off. The working power mode can only
be changed when thermostat is NOT included in
a Z-Wave network. Either to exclude and include
thermostat back in to Z-Wave network to change the
power mode to LSS (power-save, sleep mode) or to
resume AC power. You can check the actual power
mode in the thermostat MENU/DEVICE INFO.
405
407
546
Battery Low
Battery low. Please turn the system mode to off and
replace the batteries.
Battery Critical
Battery critical. Thermostat cannot control your
system. Please replace the batteries immediately.
Z-Wave Not
Configured
Z-Wave has a not been configured yet to receive
commands from your Z-Wave network. Please follow
steps on how to include thermostat in to Z-Wave
network.
547
Z-Wave Radio
Error
Z-Wave module is not operating. Thermostat cannot
receive commands from your Z-Wave network. Please
contact dealer to replace the thermostat.
Troubleshooting
Screen is blank • Check circuit breaker and reset if necessary.
• Make sure power switch at heating and cooling system is on.
• Make sure furnace door is closed securely.
• If battery powered, make sure the batteries are correctly inserted and
are not dead.
Screen is
difficult to
read
• Change screen brightness in thermostat Menu. Increase brightness
intensity for inactive backlight of the thermostat screen (max. is level 5).
Setting is available only if thermostat is AC powered.
Heating or
cooling system
does not
• Touch Mode to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
• Touch Mode to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
respond
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
Heat runs with • Verify there is not a wire attached to W for heat pump systems. See
cooling
wiring on pages 6-7.
Network
primary
controller is
missing or
otherwise
inoperable
• When the network primary controller is missing or otherwise inoperable
perform a factory reset (see page 14). Note: A factory reset will also
change the system type settings back to factory defaults.
22
| General | Details |
|---|---|
| Name | Honeywell TH6320ZW2003 Pro Z-Wave Programmable Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.34 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
tado SRTX_ADAPTER Smart Radiator Thermostat Instruction Manual
DOMETIC 3313192.XXX Single Zone LCD Thermostat Instruction Manual
GENERAL LIFE HT250S Smart Room Thermostat User Manual
JBM 54342 Parts Cleaner Machine with Thermostat Instruction Manual
emos P56201UF GoSmart Digital Room Thermostat Instruction Manual
network thermostat NetX X Series Thermostat Instruction Manual
OJ ELECTRONICS MCD3 Digital Thermostat Instructions
SALUS CONTROLS IT800WIFI Smart Thermostat Installation Guide
TRANE XR103 Non-Programmable Heat Pump Thermostat User Guide
HACH LT200 Dry Thermostat User Manual