Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide
18
Step 3: Power up and bind devices
Wireless Relay Box (BDR91) to control a boiler
Power up and bind a Wireless Relay Box
evohome
Controller
(BDR91) to control a boiler
Make sure the Wireless Relay Box (BDR91) is wired
to the boiler and powered up.
If you are NOT
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display first:
To bind the Relay Box
1
Press and hold the button for 15 seconds (until the red
1. Press and hold
‘Settings’ for 3
seconds
LED blinks rapidly) to clear any previous binding data
2
Press and hold the button again for 5 seconds
2. Press the green tick
(until the red LED blinks slowly)
3
On the evohome Controller press
3. Press SYSTEM
DEVICES
the green bind button
4. Press BOILER
CONTROL
4
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
5. Press BOILER RELAY
1
2
PRESS
AND HOLD
15 SEC
PRESS
AND HOLD
5 SEC
| General | Details |
|---|---|
| Name | Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.53 MB |

Honeywell T6 Pro Programmable Thermostat User Manual

Honeywell D1-528 Direct Thermostat Installation Guide

Honeywell FocusPRO P200 Programmable Thermostat User Guide

Honeywell RCHT8610WF Series Smart Thermostat Installation Guide

Honeywell T9 Smart Thermostat Installation Guide

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

Honeywell TL116A Thermostat Installation Guide

T10 Pro Smart Thermostat with Redlink Room Sensor

Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide

Honeywell Lyric T5 Wi-Fi Thermostat Installation Guide

































































