Home > Honeywell > Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide

Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide

26  
Step 3: Power up and bind devices  
Underfloor Heating Controller (HCE80 or HCC80)  
continued  
Then on the underfloor controller  
1
Press and hold the bind button  
until the bind  
light turns solid YELLOW and the zone number  
light flashes (either GREEN or RED).  
!
There are two versions  
of HCE80/HCC80,  
Follow the instructions below depending on which colour the  
zone number light is flashing:  
newer versions have a  
simplified single stage  
bind process while  
If the zone light is flashing GREEN (single stage bind):  
older versions have a  
two stage bind process.  
2
On the evohome Controller, press the green bind button  
Note the colour of the  
flashing zone light  
3
When the zone light turns solid YELLOW the  
binding is successful for the zone  
(GREEN or RED) and  
follow the instructions  
for that version. Put a  
tick next to the version  
for future reference.  
4
Press forward on the evohome Controller to  
complete the binding for this zone  
If you are binding more zones repeat the process from  
the sensor binding step on the previous page, then press  
the bind button  
twice on the Underfloor Heating  
Controller - The GREEN light will flash on the next zone.  
If the zone light is flashing RED (two stage bind):  
2
On the evohome Controller, press the green bind button  
3
When the message is received the zone light will turn solid RED  
4
Press the back arrow on the evohome Controller  
5
Press the bind button  
on the Underfloor Heating  
Controller – the zone light should flash GREEN  
6
7
On the evohome Controller, press the green bind button  
When the zone light turns solid GREEN the  
binding is successful for the zone  
8
Press forward on the evohome Controller to  
complete the binding for this zone  
If you are binding more zones repeat the process from  
the sensor binding step on the previous page, then press  
the bind button  
once on the Underfloor Heating  
Controller - The RED light will flash on the next zone.  
GeneralDetails
NameHoneywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide
MakeHoneywell
LanguageEnglish
FiletypePDF (Download)
File size0.53 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide

Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide