Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide
evohome Installation Guide
19
OpenTherm Bridge (R8810)
Power up and bind an OpenTherm
evohome
Controller
Bridge (R8810) to control an OpenTherm
boiler
If you are NOT
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display first:
Make sure the OpenTherm Bridge (R8810) is wired
to the boiler and powered up.
To bind the OpenTherm Bridge
1. Press and hold
‘Settings’ for 3
seconds
1
Press and hold the button for 15 seconds (until the red
LED blinks rapidly) to clear any previous binding data
2. Press the green tick
2
Press and hold the button again for 5 seconds
(until the red LED blinks slowly)
3. Press SYSTEM
DEVICES
3
On the evohome Controller press
4. Press BOILER
CONTROL
the green bind button
5. Press OPENTHERM
BRIDGE
4
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
1
2
PRESS
AND HOLD
15 SEC
PRESS
AND HOLD
5 SEC
| General | Details |
|---|---|
| Name | Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.53 MB |

Honeywell T6 Pro Programmable Thermostat User Manual

Honeywell D1-528 Direct Thermostat Installation Guide

Honeywell FocusPRO P200 Programmable Thermostat User Guide

Honeywell RCHT8610WF Series Smart Thermostat Installation Guide

Honeywell T9 Smart Thermostat Installation Guide

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

Honeywell TL116A Thermostat Installation Guide

T10 Pro Smart Thermostat with Redlink Room Sensor

Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide

Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide

































































