Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide
28
Step 3: Power up and bind devices
Mixing Valve Controller (HM80) continued
To bind the Room Temperature
Sensor (HCW82 or HCF82)
1
Press the bind button on the bottom right hand
corner of the unit once. The red LED light will flash
2
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
1
Then on the Mixing Valve Controller
1
Press and hold both buttons on the Mixing Valve
Controller for 4 seconds until the red light flashes
!
Boiler?
2
On the evohome Controller press
the green bind button
Still want to control the
3
Press the next arrow on the evohome Controller
A Mixing Valve Controller
will not provide a heat
demand to the boiler.
1
If you do want this
zone to provide a heat
demand simply change
the heating type from
'MIXING VALVE' to 'ZONE
VALVES' once the Mixing
Valve controller is bound.
PRESS
AND HOLD
4 SEC
There's no need to re-bind
any device – The Mixing
Valve Controller will still
operate as intended and
the evohome Controller
will send the heat demand
to the boiler.
| General | Details |
|---|---|
| Name | Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.53 MB |

Honeywell T6 Pro Programmable Thermostat User Manual

Honeywell D1-528 Direct Thermostat Installation Guide

Honeywell FocusPRO P200 Programmable Thermostat User Guide

Honeywell RCHT8610WF Series Smart Thermostat Installation Guide

Honeywell T9 Smart Thermostat Installation Guide

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

Honeywell TL116A Thermostat Installation Guide

T10 Pro Smart Thermostat with Redlink Room Sensor

Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide

Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide

































































