Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide
evohome Installation Guide
27
Mixing Valve Controller (HM80)
Power up and bind a Mixing Valve
evohome
Controller
Controller (HM80)
If you are NOT
A Mixing Valve Controller should only be fitted by
a qualified fitter. Unless you’re using the evohome
Controller as a sensor, you need to install a sensor
(DTS92, Y87RF, HCW82 or HCF82) before binding
the controller to the evohome Controller.
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display
once the Mixing Valve
Controller and sensor
have been installed:
To bind the Digital Room Thermostat (DTS92)
1. On the evohome
Controller press and
hold “Settings” for
3 seconds
1
Press and hold the power button for 2
seconds to put the unit into standby
2
Press the up and down arrows together for
2. Press the green tick
three seconds – it should say INst
3. Press ADD ZONE
3
Press the down arrow – it should say COnt
4. Type a name for the
new zone and press
the green tick
4
Press the up arrow three times – it should say CLr
5
Press the power button once to clear
5. Press MIXING VALVE
any previous binding data
6. If you want to control
the zone temperature
with your evohome
Controller (the
evohome Controller
needs to be located
in that zone) YES,
6
Press the up arrow – it should say COnt
7
8
Press the power button once to send the
binding signal to the evohome Controller
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
otherwise press NO
and bind the sensor.
To bind the Single Zone Thermostat (Y87RF)
1
Press and hold on the left touch zone (just below
and to the left of the display) for approximately
10 seconds until a flashing 'Bo' is displayed
2
Turn the dial clockwise until a flashing 'Co' is displayed
3
Press the left touch zone once to send the
!
binding signal to the evohome Controller
All of the remote
4
You should receive a SUCCESS message on the
room sensors will
automatically exit from
their binding menu
after a short period.
evohome Controller (if not go back and re-bind)
A
| General | Details |
|---|---|
| Name | Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.53 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell T6 Pro Programmable Thermostat User Manual
Honeywell D1-528 Direct Thermostat Installation Guide
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell RCHT8610WF Series Smart Thermostat Installation Guide
Honeywell T9 Smart Thermostat Installation Guide
Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide
Honeywell TL116A Thermostat Installation Guide
T10 Pro Smart Thermostat with Redlink Room Sensor
Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
GENERAL LIFE Senna 270 Digital Room Thermostat User Manual
Carrier 33TWSPL-4 Wifi Stat Plus Thermostat Owner’s Manual
Livn 147 Thermostat User Guide
VIVE TP-S-855C Digital Programmable Thermostat Instruction Manual
SALUS RT100 Electronic Room Thermostat Instruction Manual
GENERAL LIFE HT220 Smart Room Thermostat User Manual
Remotec REMEZTRVV01 Z Wave Thermostat User Guide
BEOK TDS23 Wifi Thermostat Owner’s Manual
CYDATA CY917B Daisy Wi-Fi Thermostat User Guide
Schneider Electric TC900 Series Space Logic Thermostat Instruction Manual