Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide
evohome Installation Guide
21
To bind the Room Temperature
Sensor (HCW82 or HCF82)
1
Press the bind button on the bottom right hand
corner of the unit once. The red LED light will flash
2
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
1
Then, on the Wireless Relay Box (BDR91)
1
Press and hold the button for 15 seconds (until the red
LED blinks rapidly) to clear any previous binding data
!
2
Press and hold the button again for 5 seconds
The Wireless Relay Box
in a Connected Pack
is bound as a boiler
controller. If you intend
to use it as a Zone Valve
controller the binding
must be cleared from
the Wireless Relay Box
first.
(until the red LED blinks slowly)
3
On the evohome Controller press
the green bind button
4
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
1
2
PRESS
AND HOLD
15 SEC
PRESS
AND HOLD
5 SEC
| General | Details |
|---|---|
| Name | Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide |
| Make | Honeywell |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.53 MB |

Honeywell T6 Pro Programmable Thermostat User Manual

Honeywell D1-528 Direct Thermostat Installation Guide

Honeywell FocusPRO P200 Programmable Thermostat User Guide

Honeywell RCHT8610WF Series Smart Thermostat Installation Guide

Honeywell T9 Smart Thermostat Installation Guide

Honeywell TH2320WF4011 FocusPRO Smart S200 Series Thermostat User Guide

Honeywell TL116A Thermostat Installation Guide

T10 Pro Smart Thermostat with Redlink Room Sensor

Honeywell TH6320WF2003 Lyric T6 Pro Wi-Fi Programmable Thermostat User Guide

Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide

































































