Wengart TP808-3 Heat Pump Thermostat User Guide

1

2

◆7days 4 time periods scheduling. Set the target heating  

and cooling temperature respectively.  

Short press fan button to select cycle.Press  

comfirm this function running.  

to  

WIFI Low Voltage Thermostat  

Wiring Diagram  

Model：TP808-W  

User Guide  

RH: Power for heating, 24V  

RC: Power for cooling, 24V  

G: Indoor blower (fan)  

S: Connect to S on C-wire adapter  

O/B: Changeover (reverse valve) connection for heat  

pump or zone panel systems  

Y: First outdoor stage cooling on conventional systems  

or first heat and cool on heat pump systems  

Y2: Second outdoor stage cooling on conventional  

systems or second heat and cool on two stage  

heat pump systems or humidifier  

NTC+: Outer Sensor+  

NTC-: Outer Sensor-  

C: Common wire, 24V  

W /AUX: First indoor stage heat on conventional  

systems or first stage auxiliary  

W2/E: Secondary indoor heat for conventional systems  

◆Both Vacation mold and hold duration mode available  

for comfort and energy saving  

◆Temperature display of Celsius or Fahrenheit scale  

If you want to circulate the air in your home using your  

indoor blower fan, you can set this feature at the  

thermostat. A percentage is selected to indicate how  

often the fan should run each hour, You can set 5%  

increments from 10% – 100%.  

EXAMPLE:  

If you set the Circulating Fan to 50%, the fan will  

run 30 minutes every hour.  

If any heat/cool cycles occur during the hour, their  

runtime is subtracted from the overall fan run time  

Item 21 Select UV lamp replacement run time  

This is the reminder to change UV lamp . Select  

starts to counting for 0 day to 360 days. The thermostat  

will display “Chg UV” when UV time (Xxdays).  

APP will also reminder  

Home screen quick reference  

Energy saving  

Week  

WIFI  

Hold mode  

Lock  

Time  

System Mode  

Time Periods  

Room Temp  

About your new thermostat  

Comfirm button  

Running Mode  

Reminder Symbols  

Set Temp  

This thermostat is used to control up to 3 stages  

heating and 2 stages cooling system with 8 types  

control system, EM heat activation, adjustable  

compressor delay time and O/B changeover. It is  

with tempered touch sensitive button, quick  

connecting terminals to save installer’s time. 7  

days programmable and four modes everyday  

make users’ life convenient and comfortable.  

Compressor delay  

Fan  

item 22 Chg pad replacement run time  

emergency heat on heat pump systems  

This is the reminder of replacement run time of Chgpad .  

Select starts to counting for 0 day to 360 days.  

The thermostat will display “Chg Pad” when Chg pad  

(XXdays).LCD will display.APP will also reminder  

item 23 Chg Filter replacement run time  

Vocation function  

Long press fan button over 7seconds to enter Vocation  

mode.Short press fan button check days->cool temp  

->heat temp.Long press  

see the parmeter flash.Short press fan button to set  

the paremeters.Short press to excit  

Setting Energy Saving Mode  

Fan mode display  

Operation  

button for 7 sec.When you  

:Switching System Mode  

This is the reminder of replacement run time of Chg Filter  

Select starts to counting for 0 day to 360 days.  

The thermostat will display “Chg Filter” when Chg Filter  

(XXdays).LCD will display.APP will also reminder  

All these three items you could check according  

to bellow steps.  

Long press Menu button over 7seconds to enter  

check page.Short press menu button to next item.  

Press+ and - button over 7seconds to reset.  

Thermostat passed FCC standard.  

Short press button to select system mode:  

HEAT,COOL,AUTO,EMER,OFF.  

:Comfirm button  

Thermostat box you will find  

Short press  

button to enter energy saving.The LCD  

Press this button to comfirm your settings.Press again  

will show on. If you need change engery saving temp.  

Long press button and button at the same  

time over 7seconds.Short press time button to set  

The order is ECO cool temp->ECO heat temp  

select Schedule、Permanent Hold and Energy saving  

:Fan Mode  

Press this button to select fan on,auto and cycle  

Setting the time  

When connecting the thermostat to Wi-Fi, the  

time will sync automatically. If not  

Thermostat  

Manual  

Screws  

QC pass certificate  

Configuration Menu  

Sensor broken  

Er1:Inner sensor broken or not work  

Er2:External sensor broken or not work  

Service  

Long press button over 7seconds when you select off to  

enter this menu  

connecting to Wi-Fi,Press  

Auto Mode  

to set second-hour-week  

We offer the warranty of 18 months from the sales day.  

If it is not the problem of quality or beyond the warranty  

time, we will charge for the after-sale service.  

Short  

Icon  

Menu item  

Notes  

Default  

No.  

Selection Range  

Installing your thermostat  

Set Up HVAC Equipment  

(Outdoor)  

Outdoor Setup  

AC1/AC2/HP1/HP2/None  

Short press button to select Auto.Short press button  

to enter AUTO mode  

OUT  

HP2  

EL1  

1

2

3

4

When you select heat pump  

(AUX) GA1/EL1/NON option  

Set Up HVAC Equipment  

(Indoor)  

Indoor Setup  

GA1/GA2/EL1/EL2/None  

IND  

This product is suitable for US standard wall box.  

1. Connect the wire of power and other equipment into  

the terminals.Fix the wall plate into the wall box  

by a screwdriver.  

Only Item 1 select  

OUT:HP1 HP2 workable  

When you select heat pump  

(EMER) GA1/EL1/NON option  

Indoor equipment 1  

Circulatio fan switch  

INE  

FA1  

NON  

ON  

:Setting the Lock  

Press and hold button at the same time over  

7seconds to lock/unlock your thermostat  

ON/OFF  

Technical Data of your thermostat  

If you set the Circulating Fan to 50%,  

the fan will run 30 minutes every hour.  

If any heat/cool cycles occur during  

the hour, their runtime is subtracted  

from the overall fan run time.  

Circulatio fan Setting range  

FA2  

30%  

ON  

5

10%-100%  

ON/OFF  

Sensor：NTC3977 10K Accuracy：±1℉  

WIFI reset  

Long press  

Auto Mode  

AUT  

CO1  

CO2  

OB  

6

7

8

Temp. Range：41℉-95℉Power Consumption：<1.5W  

Timing error：<1％  

Power Supply：AC24V, 50 ~60Hz  

Shell Material：PC （Fireproof）  

Dimension：132x90x23.5mm  

Installation box：US Standard box  

Ambient Temp.：0 ℉~ 113℉，  

5 ~ 95％RH(Non condensing）  

Storage Temp：-41℉~ 140℉  

Compressor 1 delay  

1-5min  

1-5min  

3

3

0

seconds to reset WIFI when power off  

Compressor 2 delay  

Only Item 1 select out.  

HP1/HP2 workable  

Reversing Valve Position  

O/B O:Cool B:Heat  

ON/OFF  

9

Check external sensor temperature  

(external sensor only)  

External sensor  

OFF  

SEN  

10  

ON:Set “EITHER AUX/E”control the  

same time  

OFF: if you want to setup and control  

of Auxiliary and Emergency heating  

separately . This item is only displa  

yed if Item1 is set to Heat Pump AND  

if item 2 GA1/EL1.Item3 GA1/EL1  

Aux/E stages =  

Press and  

to check external sensor temperature  

Both AUX/EMER  

APU  

ON/OFF  

ON/OFF  

OFF  

11  

12  

Setting a Schedule  

2. Connect the LCD board into the wall plate  

Item 1 should be HP1/HP2  

Item 2 should be GA1/EL1  

Item10 should ON.  

When connecting the thermostat to Wi-Fi, the schedule  

is programmed based on time and temperature set points  

from the Sensi app. If you are not connecting to Wi-Fi,  

follow these steps to set a basic 7 day schedule with 4  

OFF  

AUX lockout  

APL  

AO  

Only all of three items workable  

Item 1 should be HP1/HP2  

Item 2 should be GA1/EL1  

Item10 should ON.Item 12 ON.  

Only all of four items workable  

AUX lockout Temp  

36  

OFF  

32  

-15~20 , 5-68  

ON/OFF  

13  

14  

15  

Item 1 should be HP1/HP2  

Item 2 should be GA1/EL1  

Item 10 should ON.  

Only all of three items workable  

Item 1 should be HP1/HP2  

Item 2 should be GA1/EL1  

Item10 should ON.Item 13 ON.  

Only all of four items workable  

Heat Pump Lockout  

COL  

AC  

mandatory set points.Long press  

7secends to enter weekly program funtion.Short  

press button to set week-hour-cool temperature-heat  

button above  

Features of your thermostat  

Heat Pump Lockout Temp  

-15~20 , 5-68  

Temperature Compensation  

C/F selecable  

CL  

FC  

AH  

0

F

-9~9  

16  

17  

18  

WARNING: Please arrange the professional technician  

to install this product according to installation drawing  

and instruction.  

RISK OF ELECTRICAL SHOCK. Disconnect power  

supply before making electrical connection. Contact  

with components carrying hazardous voltage can  

cause electrical shock and may result in severe  

personal injury or death.instruction.  

temperature ,Short press  

the parameters Long press  

7seconds to go back factory weekly program settings  

to return back.Press+/- to set  

at the same time over  

◆Apply with various kind of heating and cooling system.  

Including Single stage, Multi-stage And Heat Pump  

(Up to 3-stage heat, 2-stage cool, with Aux.  

Or Emergency heat)  

◆Wireless WiFi: APPs for iOS and Android devices.  

◆Voice control: Work with Amazon Echo and Google  

Assistant.  

F/C  

Maxmum Temperature  

Range  

20-50℃,68-95℉  

95  

Minimum Temperature  

Range  

5-20℃,41-68℉  

AL  

41  

19  

Example Schedule  

Time  

12 24  

0-36  

TI  

12  

12  

20  

21  

UV Reminder time setting  

UU  

Period  

Sleep  

22:00  

Get up  

6:00  

Go outside  

8:00  

Go home  

18:00  

ChagPad Reminder Time  

Setting  

0-36  

0-36  

12  

12  

PAD  

FIL  

Week  

22  

23  

ChagFilter Reminder Time  

Setting  

Time  

Mon-Sun Cool Temp  

83  

℉

83  

℉

79  

℉

79  

℉

Note:  

Item 4: Circulating fan  

Heat Temp  

72  

℉

61  

℉

72  

℉

61  

℉

◆4’’ LCD display with backlight  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Wengart TP808-3 Heat Pump Thermostat User Guide
Make	WENGART
Language	English
Filetype	PDF (Download)
File size	1 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• WENGART

Wengart TP808-3 Heat Pump Thermostat User Guide Overview

Summary of Contents

• Page 1: 7 days 4 time periods scheduling. Set the target heating and cooling temperature respectively. This thermostat is used to control up to 3 stages heating and 2 stages cooling system with 8 types control system. Both vacation mode and hold duration mode available for comfort and energy saving. Temperature display of Celsius or Fahrenheit scale. You can set the circulating fan feature at the thermostat with a percentage to indicate how often the fan should run each hour. Select UV lamp replacement run time. The thermostat will display “Chg UV” when UV time is reached. Setting energy saving mode is available. When connecting the thermostat to Wi-Fi, the time will sync automatically. Please arrange a professional technician to install this product according to installation drawing and instruction.
• Page 2: Where to connect with third party access EZ mode WiFi connection WiFi connection and app use explanation Make sure the router is close to your mobile phone when connecting WiFi with your smart thermostat. Press the confirm button over 7 seconds to connect successfully. You could click ME in the right corner to enter voice control options. Step 1: Please download the app. Step 2: Register your account. Thermostats troubleshooting includes checking for correct wiring and sensor connections. There are two WiFi signal connection methods to your thermostat: EZ mode and AP mode.