Home > EMOS > emos P5616OT Wireless Thermostat Instruction Manual

emos P5616OT Wireless Thermostat Instruction Manual

The temperature differential (hysteresis) is the difference in temperature  
required for switching on and off. If for example you set the temperature in  
heating mode to 20 °C and differential to 0.2 °C, the thermostat activates  
heating as soon as room temperature drops to 19.8 °C and switches  
heating off when temperature reaches 20.2 °C.  
Heating/Cooling Mode  
Move the slider to the OFF position and press H and  
at the same  
time to enter settings. Then press the  
Cooling Mode settings.  
button 2× to go to Heating/  
Use + or – to select heating mode (HEAT) or cooling mode (COOL).  
Press to confirm the settings or wait 15 seconds for automatic  
confirmation.  
Factory Reset  
If the thermostat is not working properly, you can reset it to factory  
settings.  
Move the slider to the OFF position and press H and  
at the same time  
to enter settings. Press the button 3×; the letters „rESE“ will appear on  
the display. Press the A button; „----“ will appear on the display. Press A  
again and the thermostat will reset to factory settings after a few seconds.  
Lock Function  
Press and hold the H button for 5 seconds; „  
“ will appear on the display  
and all buttons will be locked. Buttons will not respond to input in this  
mode. Holding the H button for 5 seconds again will unlock the buttons.  
Display Illumination  
Pressing any button activates display illumination for 15 seconds.  
Battery Replacement  
If a „ “ icon appears on the display, it means the batteries are low and  
need replacing.  
Setting OpenTherm Parameters  
Applies only to heating mode.  
1. Move the slider to the OFF position and press H and simultaneously  
to enter OpenTherm parameter settings. „01“ will light up in the left  
corner and the water temperature in the OpenTherm boiler will ap-  
pear in the centre (if the thermostat does not receive a temperature  
reading, „--“ will be displayed instead).  
2. Press the  
button. „02“ will light up in the left corner and the  
temperature of the water returning back to the boiler will appear in  
the centre (if the thermostat does not receive a temperature reading,  
„--“ will be displayed instead).  
12  
GeneralDetails
Nameemos P5616OT Wireless Thermostat Instruction Manual
MakeEMOS
LanguageEnglish
FiletypePDF (Download)
File size1.22 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
EMOS P56201BUF Floor Heating Thermostat User Guide
EMOS P56201BUF Floor Heating Thermostat User Guide
emos P56201 Digital Room Thermostat User Manual
emos P56201 Digital Room Thermostat User Manual
EMOS P56201UF Floor Heating Thermostat Instruction Manual
EMOS P56201UF Floor Heating Thermostat Instruction Manual
emos P5604 Thermostat Instruction Manual
emos P5604 Thermostat Instruction Manual
emos P5686 Immersion Thermostat Instructions
emos P5686 Immersion Thermostat Instructions
EMOS P56211 Wireless Thermostat Instruction Manual
EMOS P56211 Wireless Thermostat Instruction Manual
emos P56201UF GoSmart Digital Room Thermostat Instruction Manual
emos P56201UF GoSmart Digital Room Thermostat Instruction Manual
EMOS P5601UF Floor Heating Thermostat User Manual
EMOS P5601UF Floor Heating Thermostat User Manual
emos P5684 Capillary Sensor Thermostat User Manual
emos P5684 Capillary Sensor Thermostat User Manual
emos P56211 Wireless Room Thermostat Instruction Manual
emos P56211 Wireless Room Thermostat Instruction Manual

emos P5616OT Wireless Thermostat Instruction Manual