LATICRETE Strata Heat WiFi Thermostat Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Wi-Fi Thermostat  

Operating Manual  

Wi-Fi  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	LATICRETE Strata Heat WiFi Thermostat Instruction Manual
Make	LATICRETE
Language	English
Filetype	PDF (Download)
File size	1.22 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• LATICRETE

LATICRETE Strata Heat WiFi Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Wi-Fi thermostat operating manual.
• Page 2: Pack contents Safety information Step 1 – Installation Step 2 – Wiring connections Table 1.0 – Thermostat use cases Wiring diagrams – over 15 amps Step 3 – Thermostat mounting Step 4 – Initial setup Welcome to the STRATA_HEAT Wi-Fi thermostat Energy monitor
• Page 3: Safety information The STRATA_HEAT Wi-Fi Thermostat must be installed by a qualified electrician. It requires a permanent 110V – 240V AC, 60Hz supply. Isolate the STRATA_HEAT Wi-Fi Thermostat from the mains supply throughout the installation process. Install the STRATA_HEAT Wi-Fi Thermostat in an area with good ventilation. Ensure the distance from your router to the STRATA_HEAT Wi-Fi Thermostat is not excessive. The STRATA_HEAT Wi-Fi Thermostat is suitable for indoor use only. For safety and licensing reasons, unauthorized change and/or modification of the STRATA_HEAT Wi-Fi Thermostat is not permitted. Isolate the STRATA_HEAT Wi-Fi Thermostat and supply from the mains supply. Install a 3-1/2 (89 mm) deep single gang or 2-gang box with mud ring in your preferred thermostat location. Pull wires (heater, supply and sensor) through gang box and complete terminal wiring.
• Page 4: Step 2 – Wiring Connections The STRATA_HEAT WiFi Thermostat must be installed by a qualified electrician in accordance with National Electrical Code. Heater Load Max. 15A (1800W/120V, 3600W/240V) Supply Live (120 V) Supply Neutral (120 V) / Supply Live (240 V) Probe 1 – Floor/Air Control Sensor (No Polarity) Floor or air temperature reading for scheduled control Probe 2 – Limit Sensor (No Polarity) See Table 1.0 for thermostat use cases The function of Probe 1, Probe 2 from Control/Limit Sensor can be swapped in Advanced Settings.
• Page 5: Thermostat use cases outline various control and limit sensor configurations. Use cases include air temperature and floor temperature schedules. Thermostats can be positioned in or out of the room for different functionalities. Floor limits and air limits are specified for certain use cases. Internal and external air sensors are utilized based on the thermostat's location. Regulator schedules are mentioned for different thermostat placements. Additional sensors may be required for specific use cases. Recommendations are provided for optimal thermostat placement. The document includes a table summarizing the use cases and their configurations. Limitations and requirements for each use case are noted.
• Page 6: Wiring diagrams for heating load connected to STRATA_HEAT™ Wi-Fi thermostat and relay 25. Max load specifications include 40 amps for Relay-25 and 15 amps for heating loads. 240V supply options include both GFCI protected and non-protected supplies. Heater(s) should not exceed a maximum load of 25A. Heating loads connect to Relay-25, controlled by STRATA_HEAT™ Smart LCD thermostat. Snubber (contact suppressor) is included in the wiring setup. Power supply configurations include L1-LOAD-L2 and L1-LINE-L2. Heater(s) are rated for a maximum of 3600W. Hot connections are specified as 240V. All heating loads must connect to Relay-25 only.
• Page 7: Step 3 – Thermostat Mounting Insert fixing screws through mounting holes of the power base and tighten. Re-attach the display to the power base. You can now restore power to the circuit and power up the STRATA_HEAT Wi-Fi Thermostat. Wi-Fi Setup Open MySTRATA_HEAT app. Scan QR Code. Follow the on screen icons to set up your system.
• Page 8: Step 4 – Initial setup Download the MySTRATA_HEAT app. Open the MySTRATA_HEAT app and scan the QR code on the STRATA_HEAT Wi-Fi thermostat screen protector or on the reverse of the display. Follow the instructions in the app to complete setup.
• Page 9: Welcome to the STRATA_HEAT Wi-Fi Thermostat. How to quickly change the temperature. Press to change your target temperature. If in program mode this will set a temporary override until your next heating period. If in manual mode this will set a fixed target temperature. Once the target temperature is set above current floor/air temperature the heating indicator will appear in the top right hand corner. How to quickly change mode. Mode select allows you to quickly change from manual mode, program mode or simply switch the heating off. Manual Mode. Program Mode. Heating OFF.
• Page 10: Heating How to set a program Setting a program allows you to set comfort temperatures at set times throughout the day. Days can be programmed individually, all days the same, or weekdays as a block and weekends as a block. To select the days you wish to program, press the designated button. A bar will appear below the day of the week. Press to set a program. Set the start time, followed by target temperature and finally the end time for that period. To add/remove heating periods, press the plus/minus button. Up to 5 periods can be set. Set setback temperature. The setback temperature is a lower energy efficient temperature when outside of a heating period.
• Page 11: Heating How to set into manual mode Setting into “manual” mode allows you to set a fixed target temperature for the thermostat to achieve. The thermostat will continue to maintain this temperature until another operating mode or temperature is selected. Set the duration of the manual mode. How to set a temporary override Setting a temporary override allows you to set a target temperature which will override your current heating program until your next heating period or for a set duration. Sets the override until next scheduled heating period. Sets the duration of the override.
• Page 12: Energy Monitor The STRATA_HEAT™ Wi-Fi Thermostat learns how you use your system and how your house reacts to heating and weather. Using the MySTRATA_HEAT App, energy monitoring will show the amount of energy consumed over a certain time period. This will be calculated through system power multiplied by efficiency and run time. You will need to enter the power of your system, and in some cases, the efficiency. Geo Location Settings Geo is a unique technology developed by LATICRETE and built into the MySTRATA_HEAT App. It uses an advanced algorithm to understand the most efficient heat settings for your home. Geo learns your routines and location through background communication with your smartphone. It lowers temperatures when you are away, only rising them to your ideal comfort temperature in time for your arrival home. Geo will operate when the thermostat is in the program or manual run modes.
• Page 13: Settings Set the current date and time. Press to begin, press to change date/time. Thermostat application Swaps probe usage, 1 being the Control Sensor Probe and 2 being the Limit Sensor Probe. Change Control Sensor Probe 1 type. Set between 5, 10, 12, 15, 100K sensor settings. Change Limit Sensor Probe 2 type. Set Air limit Set Floor limit Set display brightness
• Page 14: Settings Change homescreen override color Open window function The windows open detection feature is designed to switch off heating to save energy when the thermostat detects that a window or door has been opened. Display lock Switch display lock on Set display lock code Wi-Fi Setup Open MySTRATA_HEAT App and scan the QR code on the back of the STRATA_HEAT WiFi Thermostat display to complete Wi-Fi setup. Factory reset will erase all of your settings and restore the STRATA_HEAT WiFi Thermostat to factory defaults.
• Page 15: Notifications & error codes Date and time needs to be set Heating switched OFF Display locked Open window function triggered Temporary override enabled Sensor P2 error Holiday mode enabled Frost protect enabled Wi-Fi not setup GFCI tripped Troubleshooting Display is blank Electrician required to verify power is going to the STRATA_HEAT Wi-Fi thermostat and that it is correctly wired. Electrician required to verify that the floor sensor has been wired correctly. For temperatures between 68°F – 86°F, the resistance of the floor sensor should measure between 8K ohms and 12K ohms. Adaptive learning will use historic heating/cooling rates to determine heating start time. Wi-Fi error symbol indicates Wi-Fi not setup. Follow instructions in the app to connect the thermostat to Wi-Fi.
• Page 16: Troubleshooting Connect the STRATA_HEAT W-iFi Thermostat to a Wi-Fi network or alternatively set the time and date from the settings menu. The GFCI feature is used to detect any leakage of current from your heating system. During a ground fault, the two lines of the load will be cut off. You can test the GFCI function by increasing the set temperature until heating is on. If your test is successful, you will see the GFCI error icon and you will need to hold “X” for 3 seconds to restore heating operation. The GFCI has tripped due to a fault in the heater. Electrician required to verify that the heater has been wired correctly. Please conduct a resistance test and insulation resistance test on the heater to see if damage has occurred. The STRATA_HEAT W-iFi Thermostat has detected that one of the relays has failed. Please contact LATICRETE.
• Page 17: Wi-Fi troubleshooting Before following the troubleshooting guide, please check the following: The password is WPA2 protected. The router is set to a 2.4 GHz band. Possible connection timeout. In the MySTRATA_HEAT App, try to connect to the Wi-Fi network again. Is the router updated to the latest firmware? Update router firmware. Remove the display of the STRATA_HEAT Wi-Fi Thermostat and after 10–15 seconds reattach. Set up a mobile hotspot using a smartphone. Try to connect the STRATA_HEAT Wi-Fi Thermostat to this mobile hotspot. If the STRATA_HEAT Wi-Fi Thermostat connected to a mobile hotspot, distance from the thermostat to your router may be the issue, or the signal could be blocked. A Wi-Fi repeater/extender may be required.
• Page 18: Technical specifications Model: RSW-XX-YY-ZZ Operating voltage: 110V - 240V AC +/–15% 50Hz/60Hz Protection class: II Max. load: (120 V – 1800W, 240 V – 3600W) GFCI: Class A GFCI with 5mA trip level Max. ambient temperature: 40°C / 104°F (T40) Relative humidity: 80% IP rating: IP30 Sensor type: NTC10K @ 25°C Warranty: 1 Year
• Page 19: Warranty LATICRETE warrants this product to be free from defects in workmanship or materials for 1 year from the date of purchase. If the product is determined to be defective during the warranty period, LATICRETE shall repair or replace it. The warranty applies only if the product is registered with LATICRETE within 30 days after purchase. This warranty does not cover removal or re-installation costs. The warranty does not apply if the defect was caused by failure to follow instruction manuals or incorrect installation. LATICRETE shall not be liable for any loss or damage of any kind, including incidental or consequential damages. This warranty is the only express warranty LATICRETE makes on this product. The duration of any implied warranties is limited to the one-year duration of this warranty. This warranty does not affect your statutory rights.
• Page 20: Page 20