LATICRETE Strata Heat WiFi Thermostat Instruction Manual
Notifications & Error codes
Date and time needs to be set
Heating switched OFF
Display locked
Open window function triggered
Temporary override enabled
2
Sensor P2 (6 & 7) error
Holiday mode enabled.
(Configured in MySTRATA_HEAT App)
Sensor P1 (5 & 6) not connected /
damaged or Internal air sensor fault
- - -
Frost protect enabled.
(Configured in MySTRATA_HEAT App)
Wi-Fi not setup
Relay failure
!
GFCI tripped
GFCI
Troubleshooting
Display is blank
Power
(Electrician Required) Electrician required to verify power
is going to the STRATA_HEAT™ W-iFi Thermostat and that it
is correctly wired.
Control
1. Please see Table 1.0 and ensure you have selected the
---
2
(5 & 6) / Internal correct thermostat application.
Air sensor error
2. (Electrician Required) Electrician required to verify that
Limit Sensor Error
(6 & 7)
the floor sensor has been wired correctly. If it is correctly
wired the electrician will need to check the resistance of the
floor sensor using a multi meter. For temperatures between
68°F – 86°F (20°C – 30°C) the resistance of the floor
sensor should measure between 8K ohms and 12K ohms.
If the electrician finds a fault, and the thermostat is in the
room to be heated then it can be set into “Air Mode”.
To set into “Air Mode”, see Table 1.0 Thermostat application.
If “- - -” still remains when set into air mode the thermostat
will have to be replaced.
Heating is coming on earlier Adaptive learning Adaptive learning (Early start) will use the historic
than programmed times
(Early start) On
heating/cooling rates for the time of day, historic external
temperatures and the forecast external temperatures, to
work out the heating start time in order to reach the comfort
time at the start of the comfort period. It will only work in
Program Mode.
Wi-Fi Error Symbol
Wi-Fi not setup
1. Download and open the MySTRATA_HEAT App
2. Remove STRATA_HEAT W-iFi Thermostat from the wall
3. Scan QR code on the back of the display
4. Place thermostat back on the wall and power-up
5. Thermostat will be in pairing mode for 1 minute. App
should automatically connect to phone
!
6. Follow instructions in App
Wi-Fi disconnected Follow the step above to try and to re-connect to the
Wi-Fi Network.
If the thermostat still fails to connect,
see Wi-Fi Troubleshooting.
15
| General | Details |
|---|---|
| Name | LATICRETE Strata Heat WiFi Thermostat Instruction Manual |
| Make | LATICRETE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.22 MB |
(1 votes, average: 5.00 out of 5)
Loading...
LATICRETE 0804-0402-TW Programmable LCD Thermostat Instruction Manual
Chytre Vypinace HC-T020-EWF Series Wireless Thermostat User Manual
Arcoaire TSTATIIEWF-01 Ion Gray Smart Thermostat Owner’s Manual
EPH CONTROLS TM-S Room Thermostat Instruction Manual
EUROLAMP HY06BW Digital Heating Smart Thermostat User Manual
heatit ET-7AW Touchscreen Programmable Thermostat User Manual
Drayton 2290M Digistat 3rd Generation Programmable Room Thermostat Installation Guide
GENERAL Life HT250 Wired Room Thermostat User Guide
Danfoss RAE Radiator Thermostat Installation Guide
GTS TR8100V WiFi Pairing Thermostat Instruction Manual
ELDOM NHC-RHN-WiFi Electronic Thermostat User Manual