seitron Wi-Time Wall Wi-Fi Programmable Thermostat Instruction Manual
• The “ “ symbol In case the Wi-Fi connection is absent.
• The “ “ symbol In case the connection to the cloud is absent.
• The detected ambient temperature.
• The control mode (Comfort “ “ and Economy “ “) and the setpoint temperature (SET) set.
• Symbols “ “ or “ “ In case wi-time wall requires heating or cooling to be turned on.
• The “ “ symbol in case Boost mode has been activated from the App.
• The mode of operation: Program “ “, Manual Temporary “ ”, Manual Permanent “ ”, Antifreeze “ “ or “OFF” (turned off).
STARTUP
• Associate the programmable thermostat with the App as described in “PROGRAMMABLE THERMOSTAT-APP PAIRING.”
• Set the operation mode of the programmable thermostat on Heating (Default setting) or Cooling.
OPERATION LOGIC
In “heating” mode, when the room temperature detected by the internal sensor (or alternatively by the remote probe if connected), is
lower than the set temperature (by program or manually), wi-time wall activates the relay to start the boiler and the display shows the
icon “ “.
In “cooling” mode, when the room temperature detected by the internal sensor (or alternatively by the remote probe if connected), is
higher than the set temperature (by program or manually), wi-time wall activates the relay to start the boiler and the display shows the
icon “
“.
SETTING HEATING/COOLING MODE
To change the regulation mode from heating to cooling and vice versa, proceed as follows:
1. From the main screen (minimal or full display) hold down the “
on the display.
“ or “
“ buttons simultaneously until “COOL” or “HEAT” appears
2. At this point release the keys; the programmable thermostat will have set the operating mode in accordance with the wording on the
display (COOL = cooling, HEAT = heating).
AMBIENT TEMPERATURE REGULATION MODE
Press the “ “ button once, the wi-time wall programmable thermostat shows the current operation mode active on that moment (this
function is only available on the “minimal” display mode).
By pressing the “ “ button further, it is possible to modify the operation mode of the wi-time wall programmable thermostat choosing
among the 4 different modes:
=> “ “ (Program) => “ ” (Manual Temporary) => “ ” (Manual Permanent) => “ “ (Antifreeze) or “OFF” (turned off) =>
Once one of the modes has been selected, after a 3-second wait, the wi-time wall programmable thermostat assumes the new operating
mode and if in minimal display, returns to the main screen.
Only in the case where “ “ or “OFF” mode has been selected, after the 3-second wait, the programmable thermostat will not return to
the main screen, but will display the antifreeze setting “ “ (with its antifreeze temperature set) or off “OFF”.
Program “
“
The wi-time wall programmable thermostat regulates the room temperature according to the weekly program set exclusively
through the Seitron Smart APP.
Detail:
- The possible regulation modes are the following:
On heating mode: Off/Antifreeze, Comfort or Economy (reduction).
On cooling mode: Off, Comfort or Economy (reduction).
- Normally on ‘Heating’ mode, to have a night set-back, the economy temperature shall be lower than the comfort temperature.
On the contrary, in ‘Cooling’ mode, the economy temperature must have a higher value than that of comfort.
Temporary manual mode “
”
The wi-time wall programmable thermostat regulates the room temperature according with the manually set temperature setpoint,
until midnight of the current day, and then go back to the ‘Program’ mode.
The setpoint temperature can be changed by acting on the “
as well as on the Seitron Smart APP.
“ and “
“ keys of the wi-time wall programmable thermostat
Manual mode “
”
The wi-time wall programmable thermostat regulates the room temperature according with the manually set temperature setpoint,
GCW03MR001SE 040088 230922
7
| General | Details |
|---|---|
| Name | seitron Wi-Time Wall Wi-Fi Programmable Thermostat Instruction Manual |
| Make | seitron |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.32 MB |
(1 votes, average: 5.00 out of 5)
Loading...
seitron TAD022 Digital Room Thermostat for Heating Cooling System Instruction Manual
seitron TM 00-M Electro Mechanical Room Thermostat Instructions
seitron 039790 WiFi WiTime Wall Programmable Thermostat User Guide
seitron DR R02M Thermostat Wireless Kit Instruction Manual
seitron KTY003 Hygge Kit Class 5 WiFi Battery Powered Programmable Thermostat User Guide
seitron TR D02B Wireless Digital Thermostat User Manual
thermokon JOY SR 5DO Electronic Fancoil Thermostat User Guide
sensi 1F96U-42WF Series Touch 2 Smart Thermostat Installation Guide
VIVE TP-N-751 Programmable Thermostat Installation Guide
EZAIoT 723 IPS Wired Smart Thermostat Instruction Manual
GENERAL LIFE HT25 RF Wireless Room Thermostat User Manual
QuietWarmth THERMAEGH-ET72 Thermaegh Wifi Programmable Touchscreen Thermostat User Manual
Chytre Vypinace HC-T020-EWF Series Wireless Thermostat User Manual
Honeywell CM721 Programmable Room Thermostat User Guide
LUX TH10 Heating Only Mercury FREE Manual Thermostat Instruction Manual
AIRZONE AZX6AIQSNSB-AZX6AC1VALR Think Wireless Monochrome Thermostat User Manual