Chytre Vypinace HC-T020-EWF Series Wireless Thermostat User Manual

1

2

3

RF WIFI Wireless Thermostat User Manual  

Wifi status: Disconnection  

Cloud icon: flashing AP distribution network mode  

RF communication icon: It is always on display when it is normal, and it means  

communication is abnormal when it is flashing  

Download “Smart RM” or “Smart life” app from Google play and app store.  

:Cooling mode,this icon is always displayed when switching to cooling mode and flashes when  

the cooling load is output  

Choose one WIFI matching method of following 2:  

● WIFI matching on thermostat: connect to voltage and turn on thermostat,long press for 3-5  

seconds, when “OFF” and “ ” are flashing at the same time, short press  

when WiFi and cloud icon are blinking together  

● WIFI matching on receiver: connect to voltage and turn on receiver, long press receiver  

“push” button to match WIFI,when flashes quickly blue light is EZ matching mode; when  

flashing slowly blue light is AP matching mode.  

! IP matched before delivery,please confirm thermostat and receiver connected well and  

is working before matching WIFI.  

Quick Operation  

NO  

Icon  

Description  

to match WIFI  

A

Turn ON/OFF  

1 Short press  

B

to switch programming mode and manual mode  

2 Power on state, long press for 3-5 seconds to do program mode setting  

3 Power off state, long press for 3-5 seconds to do advanced option A  

1 Confirm key  

C

2 Power off state, long press  

3 Power on state, long press  

for 3-5 seconds to do advanced option B  

Blue light on receiver is signal indicator,it is blinking when receive wifi maching signal.  

for 3-5 seconds to setting, short press  

choose holiday mode, then “OFF” will flashing, press  

or  

change to  

activate  

Technical Data  

“ON”, short  

switch holiday days and holiday temp, then press  

☆ Power: Receiver: 230Vac 50/60HZ Thermostat: USB power supply（TYPE-C）  

! Pls remove batteries when USB power is working.  

holiday mode.  

1 Decrease key  

2 Long press to lock /unlock keys  

1 Increase key  

D

E

☆ Display accuracy: 0.5°C  

☆ Probe sensor: NTC(10k)1%  

☆ Contact capacity: 5A/250V(WW);16A/250V(WE) ☆ Output: Switch relay  

☆ Insulating condition: Normal environment  

☆ Running program: Set per 1 week as a cycle  

2 On program mode state, press  

,

to enter into temporary manual mode  

☆ Working environment temperature: 0~70°C  

☆ Installation: Wall mounted or on battery seat  

3 Long press to check external sensor temperature  

(only used for the receiver with external sensor)  

☆ Range of temperature adjustment: 5~35°C  

☆ Size(mm)：130*90*20  

Home Screen  

Time Setting  

Power on state, press  

to set minute. Second press  

again to confirm.  

to set hour. Third press  

to set week.  

Press  

to change value. Press  

Holiday Mode Setting  

Power on state, long press  

“OFF” will flashing, press  

for 3-5 seconds to setting, short press choose holiday mode, then  

or change to “ON”, short switch holiday days and holiday  

temp, then press  

activate holiday mode.  

Program Mode Setting  

6 times period setting: 5+2 days(factory default),6+1 days, 7 days  

Turn on thermostat, long press “ ” 3-5 seconds to do Program Mode Setting . Short press “ ” to  

switch and confirm. Press “  

” and “  

” to adjust value.After finish setting , stand for about 10  

seconds ,it will save setting then exit .  

Program mode;run preset program  

Temporary manual mode  

Manual mode  

1

Wake up  

2

Out door  

3

4

Out door  

5

6

Sleep  

Holiday mode, Holiday days and temperature can be set to run in countdown mode  

Back home  

Back home  

11：00  

13：30  

17：00  

22：00  

6：00 21℃ 8：00 17℃  

21℃  

17℃  

21℃  

17℃  

Heating,,icon disappears to stop heating  

External NTC sensor  

Child lock : Low power  

WIFI connection, flashing EZ distribution mode  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Chytre Vypinace HC-T020-EWF Series Wireless Thermostat User Manual
Make	Chytre vypinace
Language	English
Filetype	PDF (Download)
File size	0.25 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Chytre vypinace

Chytre Vypinace HC-T020-EWF Series Wireless Thermostat User Manual Overview

Summary of Contents

• Page 1: RF WIFI Wireless Thermostat User Manual Wifi status: Disconnection Cloud icon: flashing AP distribution network mode RF communication icon: It is always on display when it is normal, and it means communication is abnormal when it is flashing Download “Smart RM” or “Smart life” app from Google play and app store. Choose one WIFI matching method of following 2: WIFI matching on thermostat: connect to voltage and turn on thermostat, long press for 3-5 seconds. WIFI matching on receiver: connect to voltage and turn on receiver, long press receiver “push” button to match WIFI. Technical Data Power: Receiver: 230Vac 50/60HZ, Thermostat: USB power supply (TYPE-C) Display accuracy: 0.5°C Probe sensor: NTC(10k)1% Range of temperature adjustment: 5~35°C Installation: Wall mounted or on battery seat
• Page 2: Power off state, long press for 3-5 seconds to access advanced option B. Power off state, long press for 3-5 seconds to do advanced option A. After finish setting, stand for about 5 seconds, it will save setting then exit. IP address high setting and IP address low setting. Thermostat and receiver paired. Child lock options include half lock and full lock. Sensor type settings determine thermostat behavior when electrified. Low temperature protection and high temperature protection settings. Sensor fault display indicates incorrect sensor type or fault. Window function triggers based on temperature settings.
• Page 3: It will automatically turn off within 10 seconds. The load output is turned on when the light is on, and off when the light is off. When there is a fault, the load indicator blinks and an alarm is indicated. The thermostat and the receiver not being paired causes the indicator to flash 2 times. Loss of wireless signal results in the indicator flashing 3 times. An external sensor alarm causes the indicator to flash 4 times. The WIFI signal indicator flashes once when data is received. Continuous fast flashing indicates WIFI EZ network configuration mode. Professional installation is required to avoid electrical shock. Disconnect power supply before making any connection.