Home > Chytre vypinace > Chytre Vypinace HC-T020-EWF Series Wireless Thermostat User Manual
Chytre Vypinace HC-T020-EWF Series Wireless Thermostat User Manual
Power off state, long press
for 3-5 seconds to access advanced option B.
Advanced Option A
Power off state, long press
for 3-5 seconds to do advanced option A. Short press “ ” to switch and
short press
to choose the option, and adjust data by
or
,Rrmain about 5 seconds after finish
confirm. Press “ ” and “ ” to adjust options.
setting will quit setting.
After finish setting , stand for about 5 seconds ,it will save setting then exit .
Factory
Default
00
NO
Setting Options
Data Setting Function
Factory
Default
NO
A1
Setting Options
Data Setting Function
B1
B2
IP address high setting
IP address low setting
00-FF
01-FF
-9-+9℃ (Displayed as the corrected room
temperature value)
01
Temp Calibration
-1℃
Within 10 seconds after the receiver
connection (the orange LED is always on),
then continuously clicking the " " button of
the thermostat, the thermostat will send the
IP to the receiver, display”55” means IP
match successfully.
N1:single built-in sensor
N3:both built-in sensor and external sensor.
0-30 minutes
Start/stop working
temperature difference
setting
A2
A3
0.5-2.5℃
1℃
Thermostat and receiver
paired
B3
00
Child Lock
0:half lock
0:Thermostat on/off with memory when
1:full lock
0
Power on/off state
memory after electricity
cut
electrify
N1
A4
A5
0
0
B4
B5
B6
Sensor type
1:Thermostat off when electrify
2:Thermostat on when electrify
Minute interval of RF
transmission
Second interval of RF
transmission
00
05
0: 5+2
1: 6+1
2: 7
Progarm mode type
3-30 seconds
Setting temperature
minimum limit
Setting temperature
maximum limit
A6
A7
1-10℃
5℃
! Considering battery usage, RF data updates every 20 minutes. If you wanna shorten interval,
pls use USB power and remove batteries. Follow B05, B06 operation.
20-70℃
35℃
1-10°C
Return difference : limit valve of external sensor is 45℃ for factory default (A9),value of external
sensor control return difference (AA) is 2. when temperature rise to 45℃,then relay stop working and will
remind high temperature production alarm. If temperature decline to 43℃relay continue to work and
heating alarm will be relieved. (it can be operated ,only when room temperature is lower than setting
temperature )
Low temperature
protection
A8
A9
AA
When setting temp = 10℃, if press
display 【--】, cancel low temperature protection
20°C-70°C
1. When setting temp = 20°C, , if press
will
5℃
High temperature
protection for external
sensor
High temperature
protection temperature
difference setting
Standby bright
will
45°C
2℃
Sensor fault display:please choose correct working way of sensor type, if choose wrongly or sensor
fault (breakdown), “E1” or “E2” will be displayed on the screen. Thermostat will stop heating until the fault
is eliminated
display 【--】, cancel high temperature protection
1-9℃
Description of thermostat data communication:
1. Communication every 20 minutes under normal working conditions
2. On/off will communicate with the receiver once time
AB
AC
0: Off 1: Weakly bright 2:Half bright
2
Window function triggers 5-25°C,setting temperature is 10°C,decrease
--
temperature
it ,will display【--】,then canceled this function
3. When the output status is switched, it will communicate with the receiver once.
: It is always on when wireless communication is normal, and it flashes when wireless
communication is abnormal.
Window function
running time
AD
5-60min
15
0
Display Ao, long press until show the whole
screen
0:Heating 1:Cooling
AE
AF
Factory defaults
Mode select
Receiver Indicator Light
Power indicator (green): Power on receiver, green light always on; turn off receiver, the green light is
on for 1 second and off for 1 second.
RF signal indicator (orange): It is always on within 10 seconds after power-on (At this time, you can
send the IP address of the thermostat to the receiver to complete the pairing: refer to the advanced
option B3). After the pairing is successful, the signal light will be off; or if no pairing is performed
Advanced Option B
| General | Details |
|---|---|
| Name | Chytre Vypinace HC-T020-EWF Series Wireless Thermostat User Manual |
| Make | Chytre vypinace |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.25 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Chytre Vypinace HC-T020-EWF Series Thermostat Owner’s Manual
EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual
Honeywell RTHL2510 Series Programmable Thermostat Owner’s Manual
SIEMENS M3182 Room Thermostat Instruction Manual
Beok Controls TGR85 Thermostat User Guide
nVent RAYCHEM AT-TS-13 Surface Sensing Thermostat Instruction Manual
Beca BHT-006 Series Thermostat User Manual
REPTITRIP HMT16N Reptile Heating Mat With Digital Thermostat User Manual
REHAU NEA SMART 2.0 Room Thermostat Installation Guide
COPELAND 1F86-0244 Blue 2 Inch Single Stage Thermostat Instruction Manual
STELPRO STE402NP Smart Electronic Thermostat User Guide