namron Touch Z Wave 16A Thermostat Instruction Manual
EndPoint01 :
Group ID
NAME
Profile
Max nodes
Description
AGI_LIFE_LINE
（0x0001）
1
Lifeline
0
Lifeline(0x0001)
Note: the EndPoint01 has equivalent effect of root function.
EndPoint02
Group ID
NAME
Profile
Max nodes
Description
AGI_LIFE_LINE
（0x0001）
1
Lifeline
0
Lifeline(0x0001)
6.Advance Config Parameters
Parameter Size Description
Default
Value
Parent
Menu
Over current detection max. value, unit is A. When detected current is
over this
value, the device will turn off the relay and send NOTIFICATION CC.
0, disable over current detection
5-16, over current detection max. value
0x02(2)
1
16
Monitor Set
Vibration level and buzzer level triggered by pressing buttons 0, disable
vibration and buzzer
1, Low Level
2, High Level
0x03(03)
0x04(4)
1
1
1
1
Other Set
Other Set
Whether to recover to settings before power failure or power reset
0, use default settings
1, recover to settings before power failure or power reset
Floor temperature detection max. value, unit is ℃ , when floor temperature
sensor is higher than this value, the device will turn off the relay and send
NOTIFICATION CC.
0x06(6)
1
27
Monitor Set
0, disable this function
1-35, the high temperature value
Temperature control hysteresis value setting, setting range 0.5℃-5℃.
value range is 5-50, unit is 0.1℃
0x07(7)
0x08(8)
1
1
5
0
Monitor Set
None
Auto mode (Energy save mode) temperature schedule
0, use schedule set by user
1, use Energy_Save_Heating temperature set by THERMOSTAT_SETPOINT_SET
Select floor temperature sensor type
1, NTC/10K B(25/50°C)=3950
2, NTC/15K B(25/50°C)=3950
3, NTC/50K B(25/50°C)=3950
4, NTC/100K B(25/50°C)=3950
5, NTC/12K B(25/50°C)=3950
0x09(9)
1
1
1
1
Other Set
Other Set
Temperature control reference selection
1, room sensor
2, floor sensor
0x0A(10)
3, room+floor sensor
ROOM SENSOR temperature compensation setting
-10~10, unit is 0.5℃
0x0B(11)
0x0C(12)
0x0D(13)
1
1
1
0
0
Other Set
Other Set
FLOOR S ENSOR temperature compensation setting
-10~10, unit is 0.5℃
Set how long the drying mode lasts
5~100, unit is minute
Dry Mode
Schedule
30
Set the mode a fter the drying mode ends
0x00 = OFF
Dry Mode
Schedule
0x01 = Manual mode (comfort mode)
0x02 = Auto mode (energy save mode)
0x03 = Away mode
0x0E(14)
0x10(16)
1
1
2
2
When to report temperature relative change threshold value actively, unit
is 0.1℃
0, d isab l e t o r ep or t
2- 10, rep or t when t he threshold v alue i s 2- 10
None
| General | Details |
|---|---|
| Name | namron Touch Z Wave 16A Thermostat Instruction Manual |
| Make | NAMRON |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.54 MB |
(1 votes, average: 5.00 out of 5)
Loading...
namron 1402746 Touch Thermostat Instruction Manual
namron 4512738 Touch Zigbee 16A Thermostat Instruction Manual
namron 4512737 Touch Zigbee 16A Thermostat Instruction Manual
namron 16A 2.0 Zigbee Touch Thermostat Instruction Manual
Robertshaw RS8210 Thermostat Installation Guide
WHITE-RODGERS 1F51N-619 Low Voltage Evaporative Cooler Thermostat Instruction Manual
KALOR TECH 603H Thermostat Instruction Manual
Honeywell T6 Pro Programmable Thermostat Instruction Manual
Wengart TP808-3 Heat Pump Thermostat User Guide
HERSCHEL T-MT Mains Powered WiFi Thermostat
GENERAL LIFE SENNA 300S Digital Room Thermostat User Manual
75F HyperStat All In one Commercial Thermostat User Manual
STELPRO STE241 Low Voltage Electronic Thermostat User Guide
EPH Controls RFCP-RFCA RF Cylinder Thermostat Instruction Manual