Home > Micro-Air > Micro-Air 359 Touchscreen Thermostat Instruction Manual

Micro-Air 359 Touchscreen Thermostat Instruction Manual

Operational Modes  
All modes operate the overhead fan and/or a heating or cooling cycle based on the current  
heating or cooling setpoint, relative to the inside temperature.  
Fans and Fan Only Mode  
This mode lets the fan to operate based on the chosen (8) Fan Speed.  
This will circulate the air without operating any heating or cooling cycles.  
Fan Speed  
Fan Only Mode  
Cool Only Mode  
This mode only runs a cool cycle to maintain the cooling set-point in the  
space. Set the (7) Operational Mode button to Cool Only and the desired (8) Fan  
Speed, where behavior will then be based on Table 2.  
Cool Only Mode  
Environment (°F)  
Inside ≤ Setpoint  
Cycle Operation  
None  
Auto Fan Operation  
Off  
Inside 1° Above Setpoint  
Inside 3° Or More Above Setpoint  
Inside Returns 1° Below Setpoint  
Cooling Cycle Begins  
Cooling Cycle Continues  
On Low  
Low or High Based on Gap  
Runs 30 More Seconds, Off  
Cooling Cycle Terminates  
Table 2 - Cool Only Mode Operation  
Note: Table 2 operation may be different based on the Gap settings. See section Temperature Gap  
(Hysteresis) for details.  
Heat Strip Only Mode  
Heat Pump Only and Heat Strip Only Mode  
This mode only runs an electric, overhead, heat pump or heat strip  
heating cycle to maintain the heating set-point in the space. Set the (7)  
Operational Mode button to Heat Pump Only or Heat Strip Only and the desired  
(8) Fan Speed, where behavior will then be based on Table 3.  
Heat Pump Only Mode  
Environment (°F)  
Inside ≥ Setpoint  
Cycle Operation  
None  
Auto Fan Operation  
Off  
On low  
Inside 1° Or More Below Setpoint  
“Electric” Heat Cycle Begins  
Inside 3° Or More Below Setpoint “Electric” Heat Cycle Continues  
Low or High Based on Gap  
Inside Returns 1° Above Setpoint “Electric” Heat Cycle Terminates Runs 30/90 More Seconds, Off  
Table 3 - Heat Pump and Heat Strip Only Mode Operation  
Note: Table 3 operation may be different based on the Gap settings. See section Temperature Gap  
(Hysteresis) for details.  
Note: These heat modes are subject to Gas Heat Override Operation when enabled. See section Gas  
Heat Override for details.  
10  
©2023 Micro-Air Corp  
July 3, 2023, revision 1.4  
     
GeneralDetails
NameMicro-Air 359 Touchscreen Thermostat Instruction Manual
MakeMicro-Air
LanguageEnglish
FiletypePDF (Download)
File size0.5 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual
micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Thermostat Instruction Manual
micro-Air EasyTouch RV 351 Thermostat User Manual
micro-Air EasyTouch RV 351 Thermostat User Manual
Micro Air ETRV EasyTouch RV Thermostat Instruction Manual
Micro Air ETRV EasyTouch RV Thermostat Instruction Manual
micro-air EasyTouch RV 356 True Air RV Thermostat User Manual
micro-air EasyTouch RV 356 True Air RV Thermostat User Manual
micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual
micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual
micro-Air EasyTouch 352 Thermostat User Manual
micro-Air EasyTouch 352 Thermostat User Manual
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
Micro-Air 351 Air Conditioner Digital Thermostat User Guide
Micro-Air 351 Air Conditioner Digital Thermostat User Guide

Micro-Air 359 Touchscreen Thermostat Instruction Manual