GENERAL Life HT250 Wired Room Thermostat User Guide

1

2

ROOM THERMOSTAT PLACEMENT  

ROOM THERMOSTAT WIRING DIAGRAM  

ENGLISH  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room  

or side of window should be avoided. Also anywhere close to  

heating/cooling units such as radiator, stove and spots which get  

direct sun lights would not be suitable. Room Thermostat needs to be  

located above the floor 150 cm height. Few trials may be made to find  

the most convenientspot.  

HEATING/COOLING UNIT  

DIGITAL ROOM THERMOSTAT  

generallife.com.tr  

HT250 USER MANUAL  

GENERAL SPECIFICATIONS  

NO COM  

min. 20 cm  

DIGITAL ROOM THERMOSTAT  

HT250 is a wired room thermostat. The user can adjust the room  

temperature with the required temperature and get more comfortable  

and economic heating/cooling.  

Warning!  

Operations within the heating  

/

cooling unit or the electrical  

installation must be carriedout byprofessionally qualified persons.  

 PreciseTemperatureMeasurement  

 Heating calibration  

ON/OFFControl  

Wired Connection  

TPIAlgorithm  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You may need to calibrate your Room Thermostat if you  

would like to get the same temperature values with other  

thermometersin yourliving space.  

 Heating/Cooling Modes  

HT250  

USER MANUAL  

HT250 AND EQUIPMENTS  

Dowels and Screws  

HT250 Room Thermostat  

Alkaline Battery  

 While your device is turned off, press and hold the button for 3  

seconds.  

 Press the button until the “  

” menu appers. In order to see the  

desired temperature, set the temperature difference by turning the  

button to right or left. This valuecan be arranged between “-8^oC" and  

“+8^oC".  

BATTERY PLACEMENT  

Before starting, power off the device connected to the Room  

Thermostatand makesurethattheenergy is cutoff.  

TECHNICAL DATA  

Dimensions  

 To save the settings and exit, press the "On/Off" button until the  

deviceturns off.  

Note:Recommended tempreturecalibration is “0.0^oC”.  

85mm / 125mm / 24mm  

3V DC (2 x AAA alkaline battery)  

2A (30VDC – Resistive load)  

0.5A (125VAC – Resistive load)  

0.1^oC  

Operating Current  

Relay NO Switching Current  

ROOM THERMOSTAT HEATING / COOLING MODES  

Your Room Thermostat has heating and cooling modes. In order to  

switcheasilybetweenheating and cooling modes:  

 While your device is turned off, press and hold the button for 3  

seconds.  

Temperature Measurement  

Accuracy  

Operating Temperature Range  

Battery Life  

(5^oC) – (30^oC)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

Operating Temperature  

Storage Temperature  

 Pressthe button until the “  

” menu appears.  

” (heating) and “  

 You can switch between “  

” (cooling) modes  

” menu.  

byturning the button to right or leftin the “  

 To save the settings and exit, press the button until the device turns  

off.  

ROOM THERMOSTAT  

 The settings you have made have been saved. Once you turned on  

yourdevice, itwilloperatewiththe changed settings.  

As shown in the picture above, press the screwdriver forward from the  

space shown, bend the tabs and separate the front cover. Insert 2 new  

AAA alkaline batteries in the battery housing with the correct battery  

direction. Replace both batteries at the same time. Then align the  

front part of your Room Thermostat to the back and squeeze it  

towards theback.  

1

FACTORY SETTINGS RESET  

You can reset your Room Thermostat to its default factory settings.  

This operation resets the calibration setting and heating/coling  

modes to factory setting. To reset your Room Thermostat to factory  

setting:  

2

3

4

Low Battery Warning: When the “ ” icon appears on the screen, it  

means “low battery warning”. It is recommended to replace the  

batterieswhen this warning appears.  

 While your device is turned off, press and hold the button for 3  

seconds.  

5

6

 Pressthebutton until the“  

 While in the “ “ menu, turn the button to right or left in order to  

select“ “ option and pressthebutton.  

” menu appears.  

Warning: When the product is not used for a long period (more than 15  

days), remove the batteries. Otherwise, malfunctions that may occur  

would beoutof warranty.  

1

2

3

Battery Indicator  

Room Temperature  

Set Temperature  

Cooling Indicator  

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

Heating Indicator  

 Your devicewillbe turned off and resetto factory settings.  

Pleasethrowyour dead batteries into thewastebin forbatteries.  

4

5

6

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

ON/OFF and Temperature Setting Button  

generallife.com.tr  

1

2

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL Life HT250 Wired Room Thermostat User Guide
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.04 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL Life HT250 Wired Room Thermostat User Guide Overview

Summary of Contents

• Page 1: Room thermostat needs to be placed in the room which is used most frequently, such as the living room or lounge. Placing the room thermostat in spots with poor air circulation or near heating/cooling units should be avoided. Room thermostat needs to be located at a height of 150 cm above the floor. HT250 is a wired room thermostat that allows users to adjust room temperature for comfort and economic heating/cooling. Operations within the heating/cooling unit or electrical installation must be carried out by professionally qualified persons. Temperature sensors in room thermostats are highly sensitive and may require calibration for accurate readings. Your room thermostat has heating and cooling modes that can be switched easily. To reset your room thermostat to its default factory settings, specific button sequences must be followed. Low battery warning is indicated when the battery icon appears on the screen, and batteries should be replaced. When the product is not used for a long period, it is recommended to remove the batteries to prevent malfunctions.
• Page 2: Warranty conditions state that the warranty period starts from the invoice date and covers manufacturing defects for 5 years. The TPI room thermostat uses a learning process that restarts if its placement is changed or if it is de-energized. TPI technology ensures energy efficiency by predicting temperature changes and controlling heating/cooling units accordingly. Devices are delivered in working condition, and on-site commissioning incurs a service fee. Repairs covered by the warranty must be conducted at the company's factory, with transportation costs borne by the customer for on-site services. Malfunctions caused by customer misuse are not covered by the warranty. The TPI room thermostat adapts to environmental temperature changes and minimizes energy consumption. Customers must report any product damages to maintain warranty rights. The warranty does not cover damages from external factors like fire or flooding. The warranty document must be retained by the customer, and a replacement will not be issued if lost.