GLOBAL HY09RF WIFI Wireless Thermostat User Manual

1

2

HY09RF WIFI Wireless Thermostat User Manual  

Quick Operation  

NO  

Icon  

Description  

A

Turn ON/OFF  

1 Short press  

B

to switch automatic mode and manual mode  

2 Power on state, long press for 3-5 seconds to do programmable setting  

3 Power off state, long press for 3-5 seconds to do advanced setting  

1 Confirm key  

C

2 Short press it to set time  

3 Holiday mode setting.  

1 Decrease key  

2 Long press to lock /unlock  

1 Increase key  

HY09RF-1 WIFI  

HY09RF-2 WIFI  

B

D

● When power on state, long press receiver  

button“push” to match wifi. Normally on is EZ mode.  

Blinking is AP mode. Successive blinking is matching.  

Scan below QR or download “Smart RM”  

app from Google play and app store.  

2 Auto mode state, press  

,

to enter into temporary manual mode  

● The App advanced password is 123456  

3 Long press to check external sensor temperature  

(only used for the receiver with external sensor)  

! Considering battery usage, RF data updates  

every 20 minutes. If shorten interval, pls use USB  

power and remove batteries. Follow B05, B06  

operation.  

Time Setting  

Power on state, press  

to set minute. Second press  

again to confirm.  

to set hour. Third press  

to set week.  

Press to change value. Press  

,

Holiday Mode Setting  

Technical Data  

Power on state, long press  

“OFF” to “ON”. Then press  

for 3-5 seconds to do holiday mode setting. Press or to change  

to switch days and temperature, press to change value. Press  

☆ Power: Receiver:230Vac 50/60HZ  

☆ Range of temperature display: 0~40°C  

,

Transmitter: USB power supply/4*AAA Batteries  

again to confirm. If you want to close holiday mode, press  

! Pls remove batteries when USB power is working.  

☆ Display accuracy: 0.5°C  

☆ Insulating condition: Normal environment  

Programmable Mode Setting  

6 times period setting: 5+2 days(factory default),6+1 days, 7 days  

☆ Probe sensor: NTC(10k)1%  

☆ Contact capacity: 5A/250V(WW);16A/250V(WE) ☆ Output: Switch relay  

☆ Running program: Set per 1 week as a cycle  

☆ Working environment temperature: 0~70°C  

☆ Range of temperature adjustment: 5~35°C  

☆ Installation: Wall mounted or on battery seat  

☆ Size(mm)：130*90*25  

Long press “ ” 3-5 seconds to do Programmable Mode Setting . Short press “ ” to switch and  

confirm. Press “ ” and “ ” to adjust value.  

Home Screen  

Power on state, long press “ ” 3-5 seconds to enter into first time period then set hour. press “ ” and  

“

” to adjust hour, short press “ ” to confirm then set minutes, press “ ” and “ ” to adjust minutes,  

press “ ” to confirm then enter into temperature setting, press “ ” and “ ” to adjust value. Pls  

follow the steps of first time period to set second time period, thirdly time period ......  

After finish setting , stand for about 10 seconds ,it will save setting then exit .  

Wake up  

Out door  

Back home  

Out door  

Back home  

Sleep  

11：30  

13：30  

17：00  

22：00  

6：00 20℃ 8：00 15℃  

15℃  

15℃  

15℃  

15℃  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GLOBAL HY09RF WIFI Wireless Thermostat User Manual
Make	GLOBAL
Language	English
Filetype	PDF (Download)
File size	0.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GLOBAL

GLOBAL HY09RF WIFI Wireless Thermostat User Manual Overview

Summary of Contents

• Page 1: HY09RF WIFI Wireless Thermostat User Manual Quick Operation Turn ON/OFF with a short press. Switch between automatic mode and manual mode with a short press. In power on state, long press for 3-5 seconds for programmable setting. In power off state, long press for 3-5 seconds for advanced setting. To set time, short press the confirm key. Holiday mode setting can be accessed with a long press. Technical Data Power: Receiver: 230Vac 50/60HZ. Range of temperature display: 0~40°C. Display accuracy: 0.5°C. Installation: Wall mounted or on battery seat.
• Page 2: Display “55” means IP match successfully. Press B3 and B4 to adjust options. After finishing setting, it will save setting then exit. Temperature calibration range is -9 to +9℃ with a default of 0.5℃. Switching differential of built-in sensor is set to 0.5℃. Receiver indicator light shows power-on light as green and load light as red. Sensor fault displays “E1” or “E2” and stops heating until the fault is eliminated. Descaling function can be opened or closed based on settings. Weekly programmable function allows for different day settings. RISK OF ELECTRICAL SHOCK: Professional installation is recommended.