Heatit Z-TEMP2 Thermostat Installation Guide
SETTING AND REMOVING ASSOCIATIONS
Associations may be assigned and removed via Z-Wave commands.
Please refer to your primary controller/Z-Wave gateway for more
information.
10. HYSTERESIS (DIF)
You can make changes to the hysteresis in the thermostat via the
parameter. This means that you can changes the hysteresis from
0,3°C up to max 3,0°C. Default is 0,5°C.
ASSOCIATION GROUPS
11. CHILD LOCK - LOC
By pressing Left and Right (down and up buttons for 10 seconds,
the thermostat will display LOC. Child lock is now activated, and the
lock icon will be lit up when the display is active. Trying to make
changes from the display is not possible within this modus. Changes
with the Z-Wave controller is still possible. Refer to your primary
controller/gateways user manual on how to change the setpoint.
ROOT DEVICE
THE MAIN THERMOSTAT DEVICE
Group 1
Lifeline
Lifeline. (Normally used by the Z-Wave
Controller) Sends:
- Battery Report (sent when battery runs low).
- Notification Report (sent first time power on).
- Device Reset Locally Notification (sent if device
is reset).
- Indicator Report
- Thermostat Mode Report (sent when mode
changed from panel).
- Thermostat Setpoint Report (sent when
setpoint changed from panel).
- Thermostat Operating State Report (sent when
heating should be active).
Child lock is deactivated by pressing Left and Right (down and up)
buttons for 10 seconds, the thermostat will display oPn. The lock
symbol is no longer lit when the display is active, and now you can
make changes using buttons.
- Sensor Multilevel Report (periodical reports).
- Protection Report (childlock activated/
deactived from panel).
Max. nodes in group: 5
12. STANDBY AND MAIN SCREEN
Group 2
Temperature Report
Multilevel Sensor Report (internal measured
temperate and measured relative humidity).
Max. nodes in group: 5
When the thermostat remains untouched for a while, it will
automatically go to standby screen. Due to power saving settings,
while in standby, the display will be turned off. The proximity sensor
will activate the thermostat when proximity is sensed. You can also
activate the thermostat manually by pressing any button.
Group 3
ON/OFF Control
Binary Switch Set (normally used to control
external relays).
Sends:
0x00 = OFF
0xFF = ON
Max. nodes in group: 5
13. Z-WAVE QR-CODE / DSK
The QR Code is needed when including using S2-Security or
SmartStart. The Z-Wave DSK can be found in the QR-Code and is
located;
17. CONFIGURATION PARAMETERS
Z-Wave products are supposed to work out of the box after inclusion.
Some configuration of a device can alter the functionality to better
serve the user’s needs or unlock further enhanced features.
1. On the back of wall mount (above the battery compartment).
2. Inside the packaging attached on the note.
3. On the product packaging.
Parameter 1, Parameter Size 2. Temperature/ Humidity report interval
Used to adjust the time between report interval for Temperature and humidity reports.
14. SECURITY
VALUE
READ- ADVANCED ALTERING
DESCRIPTION
The S2 security enhances Z-Wave Plus with an additional layer of AES
128-bit encryption of the wireless Z-Wave communication to prevent
hacking and man-in-middle attacks on the home network. The Heatit
Z-Temp2 supports S2 and has a Z-Wave DSK QR-Code label that may
be used when the module is added to the Z-Wave home network.
The primary controller will ask for a 5-digit Code, which can be found
underneath the QR-Code. The primary controller will then ask you to
confirm the rest of the code that is contained in the QR-Code.
ONLY
CAPABILITIES
30 to 32 767
0
0
0
30 to 32 767 seconds
(Default 900)
Parameter 2, Parameter Size 2. Temperature delta value
VALUE
READ- ADVANCED ALTERING
DESCRIPTION
ONLY
CAPABILITIES
0
Reporting tempe-
rature based on
change is disabled
0
0
0
5 to 50
0.5 to 5°C
(Default 10, 1.0°C)
15. NODE INFORMATION FRAME
The node information frame is the business card of a Z-Wave device.
It contains information about the device type and its technical
features. The add and remove procedure of the device is confirmed
by sending out a node information frame. Besides this, it may
be necessary for certain network operations to send out a node
information frame.
Parameter 3, Parameter Size 2. Humidity delta value
VALUE
READ- ADVANCED ALTERING
DESCRIPTION
ONLY
CAPABILITIES
0
Reporting tempe-
rature based on
change is disabled
0
0
0
5 to 50
5 to 50%
(Default 10, 10%)
16. ASSOCIATIONS
Z-Wave devices interact with other Z-Wave devices. The relationship
between one device controlling another device is called an
association. In order to control a subordinate device, the controlling
device needs to maintain a list of devices that will receive controlling
commands. These lists are called ”Association Groups”. They are always
related to the specific event triggered (e.g., sensor reports). In case
the event is triggered, all devices stored in the respective association
group will receive a joint wireless command.
Parameter 4, Parameter Size 2. Temperature offset settings
Calibrate the internal sensor. NB! To set negative values; 65 535 – desired value + 1.
VALUE
READ- ADVANCED ALTERING
DESCRIPTION
ONLY
CAPABILITIES
-100 to 100
0
0
0
-100 to 100°C
(Default 0, 0°C)
| General | Details |
|---|---|
| Name | Heatit Z-TEMP2 Thermostat Installation Guide |
| Make | HEATIT |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.23 MB |
(1 votes, average: 5.00 out of 5)
Loading...
heatit Z-TRM6 DC Z Wave Electronic Thermostat Instruction Manual
HEATIT Z-TRM3 Thermostat User Guide
heatit Z-TRM3 WiFi Thermostat Instruction Manual
HEATIT Z-Temp3 is a Battery Operated Thermostat Instruction Manual
4512673 Heatit ZM Thermostat 16A User Guide
HEATIT Z-TRM6 Matt Z-Wave Thermostat User Guide
HEATIT 54 304 59 DIN Smart Thermostat Installation Guide
HEATIT 54 305 41 WiFi6 Thermostat Installation Guide
HEATIT Z-TEMP3 Thermostat User Guide
heatit ET-7AW Touchscreen Programmable Thermostat User Manual
SITERWELL GS368 Smart Programmable Thermostat User Manual
EUROTRONIC Spirit ZigBee Energy Saving Radiator Thermostat User Guide
MYSON Unisenza Dial Thermostat User Manual
Honeywell FocusPRO P200 Programmable Thermostat User Guide
Honeywell PCR-100 Electronic thermostat Instruction Manual
Honeywell Home DT4 Wired Room Thermostat Installation Guide
Danfoss BD271136569160en-010102 Electronic Radiator Thermostat Owner’s Manual
VILPE WIVE 100 Intake Vent Plus Thermostat
AURATON Cetus P Wired Thermostat User Manual
WARMZONE UWG5 Wi-Fi LED Touch Thermostat User Guide