Vaillant VRC 700 Weather Compensating Thermostat Instruction Manual
3.6 Start-up
When you are operating the heating in-
stallation for the first time after installing
the electrical wiring, the installation assist-
ants for the system components and the
remote control unit start automatically.
All settings that you have applied using
the installation assistant can be changed
again at a later date via the level for the
end user and competent persons.
3.6.1 Configuring the settings on the
remote control
1. Select the required language in the
Language function.
4. Carefully push the remote control unit
into the wall base.
2. Enter the address the system control
needs in order to communicate with
the remote control unit in the Remote
control address function.
3.5 Electrical installation
Only qualified electricians may carry out
the electrical installation.
3.6.2 Configuring the settings on the
system control
3.5.1 Polarity
When connecting the eBUS line, there is
no need to pay attention to the polarity. If
the connection cables are switched over,
communication will not be adversely af-
fected.
1. If you would also like to use the room
temperature sensor in the remote
control unit, select the Temp. mod. or
Thermost. setting in the Room temp.
mod. function.
3.5.2 Connecting the remote control
unit to a heat generator
2. Specify in which zone the remote con-
trol unit has been installed.
3. Scroll through the display to the zone
in which the remote control unit has
been installed.
1. At lengths of 10 m or more, power
supply cables and bus lines must be
laid separately.
4. Reduce the setting in this zone to Yes
in the Zone activated function.
5. Assign the address for the remote
control unit that should be triggered
in the Zone assignment function in
this zone.
2. When opening the electronics box in
the heat generator, proceed as de-
scribed in the installation instructions
for the heat generator.
Condition: The heat generator is not connected to
the eBUS via the VR 32.
▶ Connect the eBUS line to the eBUS
terminals in the wall base of the remote
control unit.
▶ Connect the eBUS line to the eBUS
terminals in the heat generator.
3.6.3 Changing the settings later
All settings that you have made via the in-
stallation assistant can be changed again
at a later date via the end user or installer
level.
0020200905_02 Operating and installation instructions
9
| General | Details |
|---|---|
| Name | Vaillant VRC 700 Weather Compensating Thermostat Instruction Manual |
| Make | Vaillant |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.24 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Vaillant VRT15 Room Thermostat User Guide
Vaillant VRC 700 Programmable Weather Compensating Thermostat Owner’s Manual
vaillant VR 92f/3 Wireless Additional Room Thermostat Instructions
Vaillant VRT 51f sensoROOM Wireless Room Thermostat Instruction Manual
Vaillant senso Comfort Thermostat Instructions
GENERAL LIFE 270S RF Room Thermostat User Manual
Honeywell Home TH2110DH 1 Cool Programmable Digital Thermostat Installation Guide
TIMEGUARD TRT05 Plug In Thermostat Instruction Manual
Honeywell TH6320ZW2003 Pro Z-Wave Programmable Thermostat Installation Guide
Eberle UTE 3500 Smart Home Capable Flush Mounted Thermostat Installation Guide
GENERAL LIFE Mitra 230S RF Wireless Room Thermostat User Manual
Honeywell 69-2384ES-01 RTH111 Non Programmable Thermostat Installation Guide
ecoer EST01 Wi-Fi Programmable Thermostat User Guide
ESi ESRTP4 TOUCH Programmable Room Thermostat Instruction Manual
Honeywell RTH9590 Wi-Fi Color Touchscreen Programmable Thermostat User Guide