Vaillant VRC 700 Weather Compensating Thermostat Instruction Manual
3.7 Handing over to the end user
3.9 Resetting to factory setting
▶ Inform the end user of how to handle
and operate their product.
▶ Provide the end user with all relevant
instructions and unit documentation for
safe-keeping.
▶ Go through the operating instructions
with the end user.
▶ Answer any questions the end user may
have.
▶ In particular, draw the end user's at-
tention to the safety warnings that they
must follow.
▶ Inform the end user that room air must
be able to circulate freely around the
product, and that it should not be
covered by furniture, curtains or other
objects.
You can use this function to reset all the
set values that you configured using the
remote control installation assistant.
You can access the Reset to default
setting? function directly by activat-
ing the remote control using the rotary
knob or one of the selection buttons and
then pressing and holding both selection
buttons at the same time for at least 10
seconds.
3.10 Operating and display
functions
The remote control has an end user level
and an installer level.
The setting and read-out options for the
competent person can be found via the
selection button Menu → Installer level →
Enter code.
▶ Inform the end user that all the radiator
valves in the room where the product is
installed must be fully open.
If you do not know the code, you can clear
the code using the Default setting func-
tion. All the set values will be lost if you do
this.
3.8 Operation
You can only operate the remote control
unit in combination with the VRC 700 sys-
tem control. This means that it is also ne-
cessary to read through the operating in-
structions for the VRC 700 system control.
The operating instructions for the system
control will provide you with
The path details given at the start of each
function description indicate how you
reach this function in the menu structure.
– Information on the operating structure.
– Information on the operating concept
with examples.
3.10.1 Reading the fault status
Menu → Installer level → System config-
– A detailed description of the operating
and display functions that the remote
control unit also has.
uration [System ----] → Fault status
– This function allows you to read the
status of the heating installation. If there
is no fault present, the No fault mes-
sage appears. If a there is a fault, then
Fault list appears as a status. If you
press the right-hand selection button,
displayed.
3.10.2 Reading the software version
Menu → Installer level → System config-
uration [System ----] → Control modules
10
Operating and installation instructions 0020200905_02
| General | Details |
|---|---|
| Name | Vaillant VRC 700 Weather Compensating Thermostat Instruction Manual |
| Make | Vaillant |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.24 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Vaillant VRT15 Room Thermostat User Guide
Vaillant VRC 700 Programmable Weather Compensating Thermostat Owner’s Manual
vaillant VR 92f/3 Wireless Additional Room Thermostat Instructions
Vaillant VRT 51f sensoROOM Wireless Room Thermostat Instruction Manual
Vaillant senso Comfort Thermostat Instructions
LUX TX700U Universal Thermostat Instruction Manual
Honeywell Communicating Fan Coil Thermostat Instruction Manual
expert4house BHT-12 Smart Thermostat User Manual
DELTA DORE Tybox 2300 Wireless Thermostat User Guide
Honeywell TH8000 Vertical Non Programmable Thermostat Installation Guide
HBX THM-0100 Programmable Thermostat Instruction Manual
HEARTH AND HOME Technologies E474962 Smart Stat Hht Remote Thermostat Instruction Manual
SmartLife ZBHTR20WT Zigbee Radiator Thermostat Installation Guide
JUMO B 60.3070.0 Surface Mounting Thermostat Room Thermostat Instruction Manual
Pro1 Technologies Pro1 T701i WiFi Thermostat Installation Guide