GENERAL LIFE 300S Smart Thermostat User Manual

1

2

ROOM THERMOSTAT  

ButtonFunctions  

SMART RECEIVER SETUP  

ENGLISH  



For smart receiversetup, download the application fromApp Storeor Google Play  

or scan the QR code below with your smartphone. In this way, you will be able to  

download the mobile application from App Store or Google Play to your  

1

smartphone. (You may be required to have  

depending on thebrand and model of yourphone, for thisprocess.)  

a

QR code reader application  

SMART ROOM THERMOSTAT  

2

3

generallife.com.tr  

4

5

BATTERY PLACEMENT  

Click to download.  

6

THERMA 300S SMART USER MANUAL  

1

2

3

4

5

6

ON/OFF Button  

Temperature Adjustment Button (Increasing)  

Temperature Adjustment Button (Decreasing)  

Weekly Program Button  

WHAT IS A SMART ROOM THERMOSTAT?  



Complete the user registration process by opening the mobile application that  

youdownloaded.  

OpentheBluetooth fromyourmobile phone'ssettings.  

After you completed the user registration process, press the “+” button in the top-  

right corner of the main screen of the application, Press the receiver's Wi-Fi  

pairing button for 5seconds.  

TheLEDon thereceiverwillstart toblink green.  

Setup will begin with Bluetooth in the application. When the deviceis found, press  

the“Add”button.  

Uygulamada bluetooth ile kurulum başlayacaktır. Cihaz bulununca “Add”  

butonuna basınız.  

Press the “+” button near the W Modem device and press the “Next” button after  

makingsurethatyouenteredthecorrectWi-Fiinformation.  

Wait until the setup process is completed. When you saw the green approval  

symbol on theW Modem, pressthe“Done”button in thetop-right corner.  

Pressthe screwdriverforward fromthe space at the bottom of the room thermostat,  

bend the tabs and separate the front cover. Insert 2 new AAA alkaline batteries in  

the battery housing with the correct battery direction. Replace both batteries at the  

same time. Align the front part of your room thermostat with the corresponding slot  

on theback, and thenpush gentlyuntil thethermostatsnaps intoplace.  

A

smart room thermostat is  

a

device that allows you to control your heating  

Settings Button  

Mode Button – Unlock Button  

equipment viaAPPwiththeinternetevenwhen youarenot athome.  





ProductDisplayLayout  

HOW DOES THERMA 300S SMART WORK?  

THERMA 300S SMART is a smart wireless room thermostat.You can control it with  

the mobile application after you pair your room thermostat with the receiver, and  

completetheinstallationofthesmartreceiver.  

1

9

Low Battery Warning: When the “  

” icon appears on the screen, it means “low  





10  

battery warning”. It is recommended to replace the batteries when this warning  

appears.  

Warning: When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be out of  

warranty. Pleasethrowyourdead batteriesintothewastebin forbatteries.  

2

3

11  

WHAT ARE THE ADVANTAGES OF THERMA 300SSMART?  

4









You can control your home's temperature via its mobile application, no matter  

whereyouarein theworld.  

5

6





You caneasilycreatedailyand weeklyschedules viaitsmobile application.  

You can place the room thermostat anywhere in your home, thanks to its use with  

batteries.  

RECEIVER PLACEMENT  

7

8

The important things to note for the Receiver placement are  

avoiding physical contact between the receiver and the  

heating/cooling unit, and protectingitagainstmaterialssuch  

asliquid, dust, etc.  



It ensures that your living space stays at the desired temperature at any time. In  

this way, you can saveup to 30% on your bills by preventingyour heating unit from  

working unnecessarily.  

1

2

3

4

5

6

7

8

Day Indicator  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

Hour Indicator  

Temperaturesensors which areused in room thermostatsarehighly sensitive.  

You may need to calibrate your room thermostat if you would like to get the same  

temperaturevaluesasotherthermometersin yourliving space.  

Key Lock  

Room Temperature  

Set Temperature  

Economy Mode  

Comfort Mode  

RULES THAT NEED TO BE OBSERVED FOR SAFETY  

The devices should be placed to minimize the damage to the received and  

transmittedsignals bypayingattentiontothefollowingpoints;  



While yourdeviceisturnedoff, pressthe“ON/OFF”button for3seconds.  

Press the "ON/OFF" button until the “ ” menu appears. To see the desired  

temperature, set the temperature difference by pressing the “Temperature  

AdjustmentButtons”. This valuecanbearrangedbetween“-8°C" and “+8°C".  

To save the settings and exit, press the " ON/OFF " button until the device turns  

off.  

1-Besuretoreadtheusermanual beforeusing thedeviceand itsequipment.  

2- Opening, disassembly, or use of plastic parts of the product and equipment other  

thantheintended purpose areout of warranty.  

3- Please make sure that the sockets to which you connect your devices and  

equipment areattherecommendedvoltagevaluein theusermanual.  

4- Keep away and protect your product and its equipment from all kinds of external  

substancessuch asliquid, dust, heat, etc.  

5- Do not expose the device cables to any jamming and pressure. Take care to  

connectthedevices'energyconnection tothesocketsyoucanalwaysreach.  

6- Turn off the electrical power to prevent damage to your device and apparatus in  

caseof lightning and thunderstorms.  





Thedevicesshould not bemounted on metalsurfaces.  

Weekly Program Mode  

Cooling Indicator  



The devices should not be installed close to electrical cables and electronic  

equipment such ascomputersand televisionunits.  

9

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

Heating Indicator  









The devices should not be installed near large metal structures or other building  

materialsusing finemetalmeshessuch asspecialglassorspecialconcrete.  

Distance between the room thermostat and the Receiver should not exceed 20  

metersor2floors.  

Note: Recommended temperaturecalibrationis“0.0^oC”.  

10  

11  

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

Battery Indicator  

ROOM THERMOSTAT HEATING/COOLING OPTION  

Your room thermostat has heating and cooling options. To switch easily between  

theheating and cooling options:  

Thereceivermustbeinstalledatleast50cmawayfromtheheating/cooling unit.  

Note: During active use of the room thermostat, the symbols indicated by 5, 6, 7, 8, 9  

and 10willnot appearon thescreen.  







While yourdeviceisturnedoff, pressand hold the“ON/OFF”button for3seconds.  

Pressthe“ON/OFF”button until the“ ”menu appears.  

” (heating) and “ ” (cooling) options by using  

”menu.  

To save the settings and exit, press the“ON / OFF” button until the device turns  

off.  

RECEIVER INSTALLATION  

7-Turn off theelectricalpowerwhen yourdeviceisnot used foralong time.  

8- Your devices and equipment should be used by paying attention to the matters  

stated in the user manual. In case of damage and malfunctions, arising from  

improper use (contact with liquid, falling to the ground, etc.) definitely ask for the  

installer'shelp.  

9- Call our service for maintenance and repair of THERMA 300S SMART and its  

equipment. Maintenance and repair of the device and equipment should be carried  

out only by the technical service of ISIPARK A.S. and its authorized services, spare  

parts, and accessoriesspecifiedbythecompany should beused.  







First, shut down your heating/cooling unit and your heating/cooling unit's power  

sourcewithallelectricalcurrent(fuse, socket, etc.)  

As shown in the connection diagram, connect one end of the heating/cooling unit  

connection cabletotheCOMand theothertotheNOinput of thereceiver.  

Connect the other ends of the cable -which you connected to the receiver- to the  

room thermostat connection terminal as shown in your heating/cooling unit's  

usermanual.  

RECEIVER  

You can switch between “  

the“Up”or"Down"buttons in the“  

1-Manual Operation Button:  

Deactivates the receiver and allows users to  

manually use the heating/cooling unit.  

2-Wi-Fi Pairing Button:  





1

2

The settings you have made have been saved. Once you turned on your device, it  

willoperatewiththechanged settings.  

3

Makes the receiver ready for smart installation.  

3-Receiver LED Light  







You must first connect the receiver power cable to the receiver and then to the  

fuse towhich theheating/cooling unit isconnected.  

After completing the cable connection process, first, turn on your fuse and then  

yourheating/cooling unit.  

Finish the installation of the room thermostat to pair the receiver with the room  

thermostat.  

ROOM THERMOSTAT HYSTERESIS POSITIVE MENU  

4-Receiver Power Cable Input  

The hysteresis positive factory setting of your room thermostat is 0.5°C. This value  

may be adjusted between “0.1°C” and “2.0°C”. While the hysteresis positive value is  

0.5°C, if the room temperature goes above 0.5°C of the set temperature, your room  

thermostat will send a signal to your heating/cooling unit. For instance, when you  

set your room thermostat to 22.0°C, if the room temperature goes above 22.5°C, on  

the heating mode your heating unit will stop working; on the cooling mode your  

cooling unit willstart working. Tochange thehysteresispositivesetting:  

5-Heating/Cooling Unit Connection Cable Input  

THERMA 300S SMARTand EQUIPMENT  

THERMA 300S SMART  

Room Thermostat  

Holder Alkaline  

Battery  

Receiver  

Dowels and  

Screws  

AC  

RECEIVER WIRING DIAGRAM  

4

5

COM  

NO  

(230V)  







While yourdeviceisturnedoff, pressand hold the“ON/OFF”button for3seconds.  

Pressthe“ON/OFF”button until the“ ”menu appears.  

RECEIVER LED DESCRIPTIONS  

Blinking Red  

The receiver did not get any signal from the heating/  

cooling unit for 22 minutes or longer and the heating/  

cooling unit has shut down.  

Waiting for a pairing signal from the room thermostat.  

The receiver and the room thermostat have been paired.  

Smart installation has not been completed.  

The receiver is in Bluetooth searching mode.  

Smart installation has been completed.  

The heating/cooling unit is not working.  

The heating/cooling unit is working.  

Shut the heating/cooling unit down signal has reached  

the receiver.  

Operate the heating/cooling unit signal has reached the  

receiver.  

Adjusttheoperating sensitivitybyusing the“Up”and “Down”buttons in the“  

hysteresispositivemenu.  

”

TECHNICAL DATA  

Room Thermostat  

Fast Blinking Red  

Steady Red  





To savethesettingsand exit, pressthe"ON/OFF"button until thedeviceturnsoff.  

Changes have been saved. Your room thermostat will be working with set  

operating sensitivitywhen youopen yourdevice.  

Dimensions (H/L/W)  

100mm / 160mm / 18.2mm  

3V DC (2 x AAA Alkaline Battery)  

0.1^oC  

Operating Current  

Blinking Green  

Steady Green  

Temperature Measurement Accuracy  

Operating Sensitivity  

Operating Temperature Range  

Battery Life  

Operating Temperature  

Storage Temperature  

(-2.0^oC) – (+2.0^oC)  

ROOM THERMOSTAT HYSTERESIS NEGATIVE MENU  

(5^oC) – (40^oC)  

Steady Turquoise  

3 Short Red Blinking  

The hysteresis negative factory setting of your room thermostat is -0.5°C. This  

value may be adjusted between “-0.1°C” and “-2.0°C”. While the hysteresis negative  

value is -0.5°C, if the room temperature goes below 0.5°C of the set temperature,  

your room thermostat will send a signal to your heating/cooling unit. For instance,  

when you set your room thermostat to 22°C, if the room temperature goes below  

21.5°C, on the heating mode your heating unit will start working; on the cooling  

mode your cooling unit will stop working. To change the hysteresis negative  

setting:  

HEATING/COOLING UNIT  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

Warning! Operations within the heating/cooling unit or the electrical installation  

mustbecarriedout byprofessionally qualified persons.  

3 Short Green Blinking  

Receiver  

Blinking Red and Green The heating/cooling unit is working in manual mode.  

PAIRING THE ROOM THERMOSTAT WITH THE RECEIVER  

Dimensions (H/L/W)  

90mm / 90mm / 25mm  

230V AC  

7A (240VAC – Resistive Load)  

10A (120VAC – Resistive Load)  

(-20^oC) – (+60^oC)  



To pair the room thermostat with the receiver, press the “Manual Operation  

Button” and “Wi-Fi Pairing Button” together at the same time and see the  

receiver'sfastblinking redLED.  

Operating Current  

ROOM THERMOSTAT PLACEMENT  

Relay NO Switching Current  

The room thermostat needs to be placed in the room which is used most frequently.  

For instance; the living room or lounge. Placing the room thermostat in a spot that  

has air circulation like the entrance of a room or the side of the window should be  

avoided. Also anywhereclose to heating/cooling units such as a radiator, stove, and  

spots that get directsun lights would not be suitable. The roomthermostat needs to  

be located abovethe floor 150 cm in height. Few trials may be made to find the most  

convenientspot.  







While yourdeviceisturnedoff, pressand hold the“ON/OFF”button for3seconds.  

Pressthe“ON/OFF”button until the“ ”menu appears.  

Storage Temperature  







Pressthe“ON/OFF”button for3seconds whileyourdeviceisturned off.  

Pressthe“ON/OFF”button until“  

Press your room thermostat's “Up” or “Down“ button while the LED is fast blinking  

red.  

Adjusttheoperating sensitivitybyusing the“Up”and “Down”buttons in the“  

hysteresisnegativemenu.  

”

”thepairing menu appears.  





To savethesettingsand exit, pressthe"ON/OFF"button until thedeviceturnsoff.  

Changes have been saved. Your room thermostat will be working with set  

operating sensitivitywhen youopen yourdevice.  





Ifthepairing issuccessful, thefastredflashing LEDon thereceiverwillbesteady.  

Thereceiverand room thermostathavebeen pairedwitheachother.  

1

2

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE 300S Smart Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.11 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE 300S Smart Thermostat User Manual Overview

Summary of Contents

• Page 1: room thermostat For smart receiver setup, download the application from App Store or Google Play. A smart room thermostat is a device that allows you to control your heating equipment via an app with the internet even when you are not at home. Complete the user registration process by opening the mobile application that you downloaded. Low battery warning: When the icon appears on the screen, it means low battery warning. You can control your home's temperature via its mobile application, no matter where you are in the world. You can easily create daily and weekly schedules via its mobile application. The important things to note for the receiver placement are avoiding physical contact between the receiver and the heating/cooling unit. Temperature sensors used in room thermostats are highly sensitive. The devices should not be installed close to electrical cables and electronic equipment such as computers and television units. To pair the room thermostat with the receiver, press the “Manual Operation Button” and “Wi-Fi Pairing Button” together at the same time.
• Page 2: Open window detection feature When the product is not used for a long period (more than 15 days), remove the batteries. Damages that may occur during the transportation of devices and apparatus are not covered by the warranty. Damages caused by mains voltage or faulty electrical installation are not covered by the warranty. Devices and apparatuses are out of warranty for malfunctions caused by force majeure such as fire, flood, earthquake, etc. All of the devices and apparatuses, including all their parts, are under the warranty of our company. In case of malfunction of the devices and apparatuses within the warranty period, the time spent during the repairment period is added to the warranty period. Your room thermostat measures sudden temperature changes in your house with its open window detection feature and prevents unnecessary energy consumption by turning off the heating/cooling unit. Your room thermostat takes the average room temperature of the last 40 seconds as the basis. The product manufactured by ISIPARK is connected wirelessly at 2.4 GHz internet and periodically shares the temperature and status information with the server.