GENERAL ARUNA 301S Digital Room Thermostat User Manual

1

2

ProductDisplayLayout  

MODE SETTING  

As shown in the picture above, press the screwdriverforward from the space  

shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline  

batteries in the battery housing with the correct battery direction. Replace  

both batteries at the same time. Then align the front part of your Room  

Thermostatto thebackand squeezeittowards theback.  

ENGLISH  

MODES  

7

8

1

2

PRESET MODES  

WEEKLY  

PROGRAM  

MODE  

MANUAL MODE  

DIGITAL ROOM THERMOSTAT  

Low Battery Warning: When the “ ” icon appears on the screen, it means  

“low battery warning”. It is recommended to replace the batteries when this  

warning appears.  

generallife.com.tr  

9

10  

11  

3

Comfort  

Mode  

Economy  

Mode  

Holiday  

Mode  

4

5

6

Warning: When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be out of  

warranty.  

Your Room Thermostat has  

5

different modes.  

3

of them (Comfort,  

ARUNA 301S USER MANUAL  

Economy and Holiday Mode) are preset modes. Other modes are manual  

mode and weeklyprogram mode.  

Please throwyour dead batteries into thewaste bin forbatteries.  

In preset modes, temperature values are based on user's choices which  

have been set in the beginning. Manual mode allows the Room Thermostat  

to operate within the temperature which is required and set directly by user.  

Weekly Program mode continues to work according to the weekly schedule  

determined bytheuser.  

GENERAL SPECIFICATIONS  

ARUNA 301S is  

1

2

3

4

5

6

7

8

9

Hour Indicator  

a

wired room thermostat. The user can get more  

Room Temperature  

Economy Mode  

Comfort Mode  

ROOM THERMOSTAT WIRING DIAGRAM  

comfortable and economic heating/cooling by adjusting the room  

thermostatwiththerequired temperature.  

HEATING/COOLING UNIT  

 Dailyand WeeklyProgramming  

Holiday Mode  

In order to change thetemperaturevaluesof presetmodes:  

 Different Mode Options (Comfort, Economy, Holiday)  

Weekly Program Mode  

Day Indicator  

Battery Indicator  





Press and hold the “Mode” button for  

Thermostatis on.  

3

seconds while your Room  

 Heating Calibration  

ON/OFFControl  

Wired Connection  

 Heating/Cooling Option  

TPIAlgorithm  

Comfort Mode temperature value will appear. You may adjust the  

temperature value of Comfort Mode by pressing the “Up” and “Down”  

buttons.  

Set Temperature  

Heating Indicator  

 PreciseTemperatureMeasurement  

- If the Heating Indicator is blinking, the heating unit is  

working.  

- If the Heating Indicator is steady, the heating unit is not  

ARUNA 301S and EQUIPMENTS  

NO COM  



When setting is done, you may adjust the temperature value of Economy  

Mode with the “Up” and “Down” buttons by pressing the “Mode” button  

again.  

10  

11  

Dowels and Screws  

ARUNA 301S  

Room Thermostat  

Alkaline Battery  

working.  

Cooling Indicator  

Warning!  

Operations within the heating / cooling unit or the electrical installation  

must be carriedout byprofessionally qualified persons.  





You mayexitthesetting screen bypressing the“Mode”button 3 seconds.  

In order to change the manual mode temperature, press the “Up” or  

“Down” button while in the main screen. The Room Thermostat will switch  

to Manual Mode once pressedthe“Up” or “Down”button.  

You maypressthe“Mode”button to switchto theother modes.  

- If the Cooling Indicator is blinking, the cooling unit is  

working.  

- If the Cooling Indicator is steady, the cooling unit is not  

working.  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You mayneed to calibrate yourRoom Thermostat if youwould like  

to get the same temperature values with other thermometers in your living  

space.  



TECHNICAL DATA  

ROOM THERMOSTAT PLACEMENT  

WEEKLY PROGRAM  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room or side  

of window should be avoided. Also anywhere close to heating/cooling units  

such as radiator, stove and spots which get direct sun lights would not be  

suitable. Room Thermostat needs to be located above the floor 150 cm  

height. Fewtrialsmaybe made to find themost convenientspot.  

Dimensions  

Operating Current  

Relay NO Switching Current  

85mm / 125mm / 20mm  

You may set the operating schedule of your Room Thermostat with weekly  

program mode. 7 different temperature values can be set for each day in  

weekly programming. These values can be set in temperature adjustment  

screens '' P0-P6''.  

3V DC (2 x AAA alkaline battery)  

2A/30VDC (Resistive load)  

0.5A/125VAC (Resistive load)  



While your device is turned off, press and hold the “On/Off“ button for 3  

seconds.  

Temperature Measurement Accuracy 0.1^oC  



Press the "On/Off" button until the “  

” menu appears. In order to see  



In order to set the weekly schedule, press and hold the “Weekly Program“  

button for 3 seconds while your Room Thermostat is on. The “Hour,  

Minute and Day” setting will appear. Press the “Heating & Cooling Option”  

button untilthe“WeeklyProgram”menu (P0)appears.  

Operating Temperature Range  

Battery Life  

(5^oC) – (30^oC)  

the desired temperature, set the temperature difference by pressing the  

“Temperature Adjustment Buttons”. This value can be arranged between  

“-8°C" and “+8° C".  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

Operating Temperature  

Storage Temperature  



In order to save the settings and exit, press the "On/Off" button until the  

deviceturns off.  



Days of the week will be blinking on the screen. You can initiate the weekly  

program setting if you wish to set the same schedule for every day of the  

week.  

min. 20 cm  

Note:Recommended temperature calibration is “0.0°C”.  

ROOM THERMOSTAT  

ButtonFunctions  







Press the “Up“ button once if you wish to set the same schedule for the  

weekdays. Firstfivedaysof weekwill be blinking on thescreen.  

Press the “Up“ button once more if you wish to set the same schedule only  

for theweekend. Lasttwodaysof theweekwill be blinking on thescreen.  

Press the “Up“ button one more time if you wish to set the same schedule  

for every day of the week. 1st day of the week will be blinking on the  

screen. You can switch between the days by pressing the “Up“ button.  

Press the“Down“button in order to switchto thepreviousday.  

Press the“WeeklyProgram“button once to setaschedule.  

“P0” will be blinking on the screen. Set the temperature value of “P0” by  

pressing the “Weekly Program“button once more. The hour setting of “P0”  

cannot be changed since it's factory setting.  

FACTORY SETTINGS RESET  

You can reset your Room Thermostat to its default factory settings. This  

operation resets the mode temperature values, calibration setting and  

heating/cooling modes to factory setting. In order to reset your Room  

Thermostatto factory setting:  



While your device is turned off, press and hold the “On/Off” button for 3  

seconds.  





Pressthe“On/Off” button untilthe“  

While in the “ ” menu, select the “  

“Down”buttons and pressthe“On/Off” button.  

Your devicewill be turned off and resetto factory settings.  

” menu appears.  





” option by using the “Up” or  

1

2

3

4

5

6







Press the “Weekly Program” button again. Day indicator will be blinking. If  

you will not change the day, press the “Weekly Program” button again and  

switchto the“P1” settingbypressing the“Up” button.  

DAY AND HOUR SETTINGS  

BATTERY PLACEMENT  

Before starting, power off the device connected to the Room Thermostat  

and makesurethatthe energy is cut off.  







While your Room Thermostat is on, keep pressing the “Weekly Program”  

button for 3 seconds.  

1

2

3

4

5

6

On/Off Button  

Heating & Cooling Option  

Weekly Program Button  

First, hour setting will appear on the screen. Once you complete the hour  

setting, adjust the minute setting by pressing the “Weekly Program”  

button. After the minute setting, press the “Weekly Program” button to set  

thetemperaturevalue.  

At the first screen that appears, hour part will be blinking. You may set the  

timewiththe“Up” and“Down” buttons.  

Temperature Adjustment Button (To Decrease)  

Temperature Adjustment Button (To Increase)  

Mode Button  

After setting the time, the “Heating & Cooling Option” button needs to be  

pressed once. For minute setting, minute part will be blinking. You mayset  

theminute withthe“Up” and“Down” buttons.  





Follow thesamesteps for other schedule settings.  

Once all changes made, press and hold the “Weekly Program” button for 3  

seconds to save.  



After setting the minute, the “Heating & Cooling Option” button needs to  

be pressed once to setthe dayof theweek.  





Mondayhas setasthe firstdayof the weekand indicated withnumber“1".  

Numbers indicate the following days respectively 2-Tuesday, 3-  

Wednesday, 4-Thursday, 5-Friday, 6-Saturdayand 7-Sunday  

When setting is done, you may exit by pressing the “Weekly Program”  

button for 3 seconds.  

Note: In order to check the weekly schedule which has been set without  

making any changes, press the “Weekly Program” button once while your  

Room Thermostat is on. Press the “Up” and “Down” buttons to see the days,  

pressthe “Mode”button to seethesettingsbetween“P0-P6”.  



1

2

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL ARUNA 301S Digital Room Thermostat User Manual
Make	GENERAL
Language	English
Filetype	PDF (Download)
File size	2.11 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL

GENERAL ARUNA 301S Digital Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Product display layout Mode setting Insert 2 new AAA alkaline batteries in the battery housing with the correct battery direction. Your Room Thermostat has 5 different modes. Comfort, Economy, and Holiday Mode are preset modes. Manual mode allows the Room Thermostat to operate within the temperature set directly by the user. Weekly Program mode continues to work according to the weekly schedule determined by the user. Low battery warning: When the icon appears on the screen, it means low battery warning. When the product is not used for a long period, remove the batteries. Room Thermostat needs to be placed in the room which is used most frequently.
• Page 2: TPI room thermostat working logic Your room thermostat works with the TPI algorithm, predicting temperature changes to maintain your set temperature with minimal deviation. If the placement of the TPI room thermostats is changed, the learning process will restart and should be considered as 7 days. TPI technology ensures the best possible energy efficiency from your heating/cooling system. Malfunctions resulting from the use of devices contrary to the user manual are not covered by the warranty. The warranty period starts from the invoice date and covers manufacturing defects for 5 years. In case of malfunctioning devices, testing is conducted to determine if the fault is due to customer or manufacturer error. The connection between your room thermostat and heating/cooling unit should be made by professionally qualified persons. The TPI algorithm creates a general temperature map of your home, learning how to maintain the desired temperature efficiently. Damages caused by mains voltage or faulty electrical installation are not covered by the warranty. The warranty document must be kept by the customer during the warranty period; a second document will not be issued if lost.