STELPRO STE302NP Single Programming Electronic Thermostat User Guide
Parameters saving and power failures
The thermostat saves some parameters in a non-volatile memory to be able to recover them after
being shut off (a power failure, for example). These parameters are the Day/Night settings, the Single
programming mode, the state of the Security mode, the maximum symbol of the Security mode, the
Celsius/Fahrenheit symbol, the Fan mode, the number of minutes associated to a heating cycle, the
number of hours of the night time-switch, the number of hours remaining on the night time-switch and the
current Day/Night mode. These parameters are saved every minute if any changes are made, except for
the Day/Night mode and the remaining time left on the time-switch. These are saved only if the Single
programming mode had not been activated.
Please note that the Single programming mode is not automatically reactivated when the thermostat
is turned on. The
icon blinks to warn the user that the mode was previously activated when the
thermostat was shut off but is no longer active. Furthermore, when power is shut off, the existing Day/
Night mode is recovered only if the Single programming mode was previously deactivated. In the
opposite case, the Day mode is automatically reactivated. The Security mode is also reactivated if it was
previously activated. However, the icon will blink for 5 minutes, during which it is possible to deactivate
the Security mode by pressing down both buttons simultaneously for 13 seconds. If this is not done, the
Security mode will remain activated and the icon will stop blinking.
Night light (only for model with backlight)
You can activate the Night light option to permanently turn on the backlight. To activate or deactivate
this mode, the thermostat must first be set in Day mode. Then, simultaneously press down both buttons
for 3 seconds until the backlight blinks. Release the buttons. The night light mode will be activated (or
deactivated if it was previously activated).
INSSTE302NP0614
13
| General | Details |
|---|---|
| Name | STELPRO STE302NP Single Programming Electronic Thermostat User Guide |
| Make | StelPro |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.36 MB |
(1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide
emos P5616OT Wireless Thermostat Instruction Manual
GENERAL LIFE MITRA 260S RF Room Thermostat User Manual
Danfoss ECtemp 610 Electronic Thermostat Installation Guide
GENERAL LIFE HT300S Digital Room Thermostat User Manual
Honeywell TH8321WF02 Vision Pro WiFi Programmable Thermostat User Manual
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
SKYTECH 5320P Programmable Thermostat Fireplace Remote Control Instruction Manual
Honeywell T8131A Programmable Thermostat Owner’s Manual
Wengart TP808-3 Heat Pump Thermostat User Guide
SUNDIRECT Smart2.0 SDUM23001 Battery Back-Up Wireless thermostat Instruction Manual