STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide
lights up and the display indicates the temperature. In
this case, press down once again the Test button to
reinitialize the EGFPD, the red indicator turns off.
b) Failed test: The red indicator of the thermostat lights up
and the display indicates E4. In this case, disconnect the
heating system at the electrical panel and call Stelpro’s
customer service.
c) Failed test: The red indicator of the thermostat lights
up and the display shows only the time. In this case,
disconnect the heating system at the electrical panel and
contact Stelpro’s customer service. The thermostat has
detected a ground-fault.
Security mode
This mode imposes a maximum temperature set point which
is impossible to exceed regardless of the mode in progress.
However, it is still possible to lower the set point at your
discretion. The programming of the Auto and Pre-Prog modes
also respects this maximum temperature set point. Please note
that when the Security mode is activated, it is impossible to
switch from the
mode to the
mode, and conversely.
Procedures to activate Security mode
1. Exit any adjustment mode to manually adjust the set point at
the desired maximum value.
2. Simultaneously press down the + and - buttons during
10 seconds (note that after 3 seconds, the
icon starts
to blink and the software version and date are displayed.
Continue to press down these buttons).
3. After 10 seconds, the icon is displayed indicating that the
Security mode is activated. Then, release the buttons.
Procedures to deactivate Security mode
1. To deactivate the Security mode, cut off the power supply
of the thermostat at the electrical panel and wait at least
30 seconds.
18
INSSTCP15MA0622
| General | Details |
|---|---|
| Name | STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide |
| Make | StelPro |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |
(1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
SECURE radbot 1 Intelligent Radiator Thermostat Instruction Manual
Homematic IP BMOAONSUT Radiator Thermostat User Manual
Chytre Vypinace HC-T020-EWF Series Thermostat Owner’s Manual
tado ST02 Wired Smart Thermostat X Installation Guide
LUXPRO PSD111+ Series Thermostat Instruction Manual
meitav-tec FMH24-PD-1S-IR Thermostat Owner’s Manual
Thermostats BHT-8000RF Wireless Thermostat User Manual
Tio TEVO Smart RF Wireless Thermostat User Manual
Schneider SpaceLogic Thermostat Installation Guide
VIMAR 02913 Surface LTE Thermostat Installation Guide