STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide
Programming Procedure of the Automatic Mode
After programming a day of the week, you can copy this setting;
see “Copy of the Programming”.
1. To access the Programming mode, press down the day of
the week button that you want to program (Mon to Sun).
Once you release the button, the selected day of the week is
displayed, the
too.
icon blinks and the period number 1 blinks
2. Select the period number (1 to 4) that you want to program
using the + or - button. For each period, the hour and the set
point are displayed. The hour displays --:-- and the set point
displays -- if there is no programming for the period. You
must confirm the period by pressing down the Mode button.
3. The two figures representing the hour blink to indicate that
you can adjust them (from 00 to 23) using the + or – button.
You must confirm the adjustment by pressing down the
Mode button.
4. After confirmation, the figures representing the minutes (the
last 2 figures) blink. You can adjust and confirm them in the
manner described in point 3. Note that the minutes can only
be adjusted by increments of 15 minutes.
5. The period set point blinks and you can adjust it using the
+ or - button. You must confirm the adjustment by pressing
down the Mode button.
6. After set point confirmation, the programming is completed.
The following period number blinks. For example, if the
previously programmed period was 1, period 2 blinks. It is
then possible to continue the programming of this period by
pressing down the Mode button. You can also select another
period using the + or – button.
7. At the end of period 4 programming, you automatically exit
the Programming mode.
At any time, you can exit the Programming mode
using one of these 3 methods:
11
INSSTCP15MA0622
| General | Details |
|---|---|
| Name | STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide |
| Make | StelPro |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |
(1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
tekmar U-T-562 WiFi Thermostat User Manual
Danfoss VIIDH102 Living Connect Intelligent Radiator Thermostat User Guide
aube technologies TH110A-DP-P Thermostat User Manual
Haswill Electronics STC-8080A+ Thermostat User Guide
GENERAL LIFE SENNA 300S RF Wireless Room Thermostat User Manual
GENERAL LIFE FH100 Underfloor Heating Thermostat User Manual
GENERAL ARUNA FH25S Underfloor Heating Thermostat User Manual
somfy 1870776 Wired IO Thermostat Instructions
SunTouch SunStat CommandPlus Programmable Thermostat Instruction Manual
ENSTO ECO500 Frost Protection Thermostat Instruction Manual