STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide
1-Press down the button of the day you are adjusting.
2-Press down the button of another day to program it.
3-Press down the Exit button.
Moreover, if you do not press down any button for more than
1 minute, the thermostat will exit the Programming mode. In all
cases, the programming is saved.
Anticipated Start
This mode enables the room to reach the selected temperature
at the programmed hour by starting or stopping the heating
before this time. In fact, the thermostat estimates the delay
required to reach the set point of the next period at the
programmed hour. This delay is obtained by the observation of
the temperature variations in the room and the results obtained
during the preceding anticipated starts. Therefore, results
should be increasingly precise day after day. From this mode,
the thermostat displays at any time the set point ( ) of the
current period. The
icon will blink when the anticipated start
of the next period begins.
For example, if the requested temperature between 8h00am
and 10h00pm is 22°C and between 10h00 pm and 8h00am
is 18°C, the set point ( ) will indicate 18°C until 7h59am
and will switch to 22°C at 8h00am. Thus, you will not see the
progression carried out by the anticipated start, only the desired
result.
To activate or deactivate the anticipated start, the thermostat
must be in Auto or Pre Prog mode. Then, you must press down
the Mode button for at least 5 seconds. The anticipated start
icon ( ) is displayed or hidden to indicate the activation or the
deactivation of the mode. This modification will apply to the Auto
as well as the Pre Prog mode. If you modify the temperature set
point manually when these modes are activated, the anticipated
start of the next period will be cancelled.
N.B. Please note that the anticipated start is initially activated
when you enter the Automatic or Preprogrammed mode.
12
INSSTCP15MA0622
| General | Details |
|---|---|
| Name | STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide |
| Make | StelPro |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |
(1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
amazon basics B07W85DJQV 3 Heat ECO Setting 2 Fans Speed Thermostat Instruction Manual
HYSEN HY02DB-WIFI Wifi Plug In Thermostat User Manual
beca BAC-003 Series WiFi Thermostat Fan Coil User Guide
ENGO CONTROLS E901-RF Programmable Wireless Thermostat Instruction Manual
PRO1 T805 Non Programmable Thermostat Instruction Manual
PRO1 T701 Digital Non Programmable Thermostat Instruction Manual
hansgrohe 15763003 Shower Select Thermostat Instruction Manual
Honeywell Home M38794 T10 and T10 plus Pro Smart Thermostat with RedLINK Installation Guide
Honeywell T827 Series Programmable Thermostat Owner’s Manual
ADAX VG11 Digital Thermostat User Guide