FantiniCosmi CH123E 230V Flush Mounting Thermostat Installation Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

ENG  

FLUSH MOUNTING THERMOSTAT 230V  

INSTALLATION AND USER MANUAL  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	FantiniCosmi CH123E 230V Flush Mounting Thermostat Installation Guide
Make	FantiniCosmi
Language	English
Filetype	PDF (Download)
File size	0.4 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• FantiniCosmi

FantiniCosmi CH123E 230V Flush Mounting Thermostat Installation Guide Overview

Summary of Contents

• Page 1: Flush mounting thermostat 230V Installation and user manual
• Page 2: Intellicomfort CH123E Flush mounting thermostat 230V Thank you for purchasing the Fantini Cosmi flush mounting thermostat, model CH123E. This manual contains all the information required for a correct installation and configuration. Carefully read the installation instructions, safety warnings, operating modes and maintenance instructions in this booklet. After removing the packaging, check the integrity of the appliance; if in doubt, do not use it. Installation of the appliance should only be carried out by qualified technicians in compliance with current standards. The use of any electrical appliance involves observing certain basic rules. Do not touch the device with wet hands or wet feet or bare feet. Do not expose the device to the weather (rain, sun, etc.). Before carrying out any maintenance or cleaning work, switch off the power supply. Do not power the appliance with the cover open.
• Page 3: Intellicomfort CH123E Technical features Installation Electrical connections Display and keys description Operation Thermostat configuration Maintenance Disposal Contents of package 1 thermostat, 1 frame, 1 white cover, type A, 2 screws, 1 user manual
• Page 4: Intellicomfort CH123E Technical features Power supply: 230V 50Hz Contact range: 5(3)A 250V~, voltage-free switching Maximum room temperature: T45 °C Temperature adjustment scale: 2 ÷ 40 °C, increase 0.1°C Measurement scale/room T display: -40 ÷ 50 °C Type of action: 1B microdisconnection Degree of protection: IP20 Pollution degree: 2 Electric insulation: Double insulation, Class A Dimensions: 68 x 52.2 x 58 mm
• Page 5: Intellicomfort CH123E The CH123E thermostat must be installed in a 3-module recessed box, in the middle of the apartment, preferably 1.5 m off the ground. The required components, all included in the package according to the following table. Models and their specifications are listed, including cover type, frame type, tabs to detach cover, color, and adapters kit.
• Page 6: Intellicomfort CH123E Installation and maintenance operations must be carried out with the system's electrical power switched off and by qualified personnel. Perform the following operations: Act on the master switch on the electric panel to cut power to the electrical system. Detach the tabs according to the type of plate when required. Fasten the thermostat to the suitable frame. Mount the cover on the body of the thermostat. Connect the two wires of the boiler to terminals 1-2 of CH123E. Screw the frame onto the box using the provided screws. Mount the plate. Switch the electric system back on.
• Page 7: Intellicomfort CH123E Electrical connections Installation and maintenance operations must be carried out with the system's electrical power switched off and by qualified personnel, in compliance with the regulations in force. Please note: when CH123E is disconnected, the boiler contact remains in its current position. During black-outs, the programmed parameters will not be lost as the settings are stored in a non-volatile memory.
• Page 8: Intellicomfort CH123E The thermostat is equipped with 4 keys, the function of which varies depending on the situation. It is described by the symbol which appears on the display next to the key. Press both keys simultaneously to select summer (cooling) or winter (heating) mode.
• Page 9: Intellicomfort CH123E Operating mode selection Press to set comfort/TMAX mode Press to set economy/TMIN mode Press to set off antifreeze mode Customise the temperature When you have set the operating mode Press the two keys to set the temperature Economy/TMIN 2 ÷ 40 °C Comfort/TMAX 2 ÷ 40 °C Off antifreeze 0 ÷ 7 °C
• Page 10: Intellicomfort CH123E Choice of back lighting duration Increase/decrease back lighting duration by pressing specific keys. Press together and keep pressed to change back lighting duration. You may choose the time during which back lighting remains on. Options include always off, 1 sec, 10 sec, and always on.
• Page 11: Thermostat configuration allows customization of the device's operating parameters. Only qualified personnel may configure the device. To access the configuration program, press the reset button while holding down the COMFORT/ECONOMY button. When the display reads P01, release the COMFORT/ECONOMY button. The display represents the configuration parameters by an index: P01, P02, etc. Press or to scroll the parameter indexes. Press to edit a parameter. Use and to change the value of the parameter. Press again to go back to the parameter index. To exit parameter configuration, press or until the display reads END.
• Page 12: Intellicomfort CH123E Display mode options include viewing room temperature or set point. Correction of displayed temperature value ranges from -4°C to +4°C in 0.1°C steps. Winter lower limit set point temperature is adjustable from 2.0°C to 40.0°C. Winter upper limit set point temperature is set at 40.0°C. Summer lower limit set point temperature is adjustable from 2.0°C to 40.0°C. Summer upper limit set point temperature is set at 40.0°C. Differential adjustment ranges from ±0.3°C to ±2.0°C in 0.1°C steps. Temperature scale options include Celsius and Fahrenheit. End parameter configuration and store values. Specific differential values are suited for different types of plants based on thermal inertia.
• Page 13: Use only a soft and dry cloth to clean the device. Do not use water or other liquid substances. The symbol of the crossed-out wheeled bin indicates that the product must be collected and disposed of separately from household waste. Batteries and the integrated accumulators may be disposed of together with the product. They will be separated at the recycling facilities. A black bar indicates that the product was placed on the market after August 13th, 2005. Participating in the separate collection of products and batteries contributes to the correct disposal of these materials. This helps avoid possible negative consequences for the environment and human health. For more detailed information on the collection and recycling programs available in your country, contact the local authorities or the sales point where you purchased the product.
• Page 14: Page 14
• Page 15: Page 15