Home > Thermostats > Thermostats BHT-8000RF Wireless Thermostat User Manual

Thermostats BHT-8000RF Wireless Thermostat User Manual

2

RECEIVER OPERATION

1. Power: Press the "left button" to control the receiver on/off. When the

Power light is on, it means it is turned on, otherwise it is turned off.

Electrical Shock or Equipment Damage Hazard,

can shock individuals or short equipment

circuitry.Disconnect power supply

before installation.

1. The wifi version can display weather information. The Wifi version connects to

the Internet for the first time, and the weather data is uploaded to the thermostat

after the thermostat runs for 3-4 minutes. After connecting to wifi, the weather

information will be updated every 30 minutes.

TECHNICAL DATA

BHT-8000RF Wireless Thermostat

3 A(water heating/

waterboiler/gas boiler)；

16 A（electric heating）

CAUTION

Receiver

Power Supply

95～240 V AC，

50～60 Hz

Receiver

2. When the wifi version is connected to the Internet, click the

display the current humidity information in the upper left corner

key to

2. When the receiver is turned on, press and hold the "right button" to enter

the code matching between the display panel and the receiver. At this time,

IP Seting flashes red, see the following "Setting the Functions and

Options" for details

When the receiver is off, long press the "right button", the receiver enters

the Wi-Fi network configuration state, the Wi-Fi light will flash quickly

(AP mode) or the Wi-Fi light will display slowly (EP mode), see the wifi

connection process below for details.

Current Load

Power supply: 95~220V, 50/60Hz;

WIRING

LED Panel

power supply

Temperature

control accuracy

Sensor

2*AA Battery/USB

0.5℃

maximum load : 16A ,for electric heating film, cable, tile.

maximum load : 3A, for water valve actuator ;

maximum load : 3A, for wall-hung boiler;

Temp. Error

±1℃

NTC3950,10K

Set Temp.

Range

DISPLAY PANEL OPERATION

Timing Error

<1%

5～35℃

Working

Ambient Temp/

Humidity

1. Power: Press the

to control the power on/off of the display panel.

0～45℃，5～95% RH Power

（Non Condensing） consumption

<1.5W

Note: When the display panel is powered by battery, after 20 seconds of no

operation, the panel will stop and enter the energy-saving state, the APP will be

Setting the Functions and Options

Receiver

PC+ABS（Fireproof）

Installation

LED Panel

Material

Wall-mounted

locked, click

on the APP to unlock the APP;

When the display panel is off , press

seconds to enter the advanced selection setting. Press

function, press or to adjust the corresponding value. All advanced

and

at the same time for 5

Open

to select the

Capacitive Touch

Buttons

IP20

LED

Protection Class

Screen

When the display panel is powered by USB, the APP will not be locked.

The display panel uses 2*AA for power supply. If the battery voltage is insufficient,

option settings will take effect automatically after restarting the thermostat.

Note: Only for normally closed valves

Suitable for electric heating/water heating/wall-hung boiler/boiler

the screen will display a

icon. Please replace the battery in time.

Note: Item 1.2.3 of Setting the Functions and Options is the code matching

connection setting of the display panel and the receiver.

Thank you for choosing our products!

Unit: mm

DIMENSION

2、Manual & programming mode：Press

programming mode

Manual mode: the user sets the temperature by himself;

Programming mode: The thermostat will control the temperature according to

the preset value. See "Programming Set" for details.

to switch manual mode

and

Code matching connection steps: 1. The first item is set to 1; the second item

is the serial number of the thermostat 0-99, as long as the serial numbers of

the two thermostats are different; the third item does not need to be set.

IN THE BOX YOU WILL FIN D

17.5

130.0

Open

60.0

Display panel*1

Receiver*1

Bracket*1

USB*1

GAB

GBC

GAC

Screw*2

QC passed*1 Manual*1

After the display panel completes the above operations, when the receiver is

turned on, press and hold the right button for 5 seconds, and the IP Seting

flashes red light to indicate the start of code matching, and the steady red

light indicates that the code matching is completed.

Then check the 3rd item of the advanced options on the display panel, and

1 is displayed, indicating that the code is matched successfully.

Non-marking hook*2

INSTALLATION

ABOUT YOUR THERMOSTAT

BHT-8000RF is suitable for electric heating, water heating, wall-hung

boilers and boiler temperature control systems.

90.0

3. Temp. Set: Press

temperature can be set arbitrarily.

to set the temperature. Only in manual mode, the

It can be used in smart homes, shopping malls and industrial sites.

Before use, please confirm the specific model of this product and the

corresponding heating equipment.

Please refer to the wiring diagram to identify the model or contact the

merchant.

4. Time Set: press

to enter time setting, press

to adjust the value,

respectively for minutes, hours, and days (the screen displays "1" for Monday, "2"

means Tuesday, and so on) for setting. After the adjustment is complete,

Code Function

Setting and options Default

DISPLAY PANEL

press

to exit the time setting

00：Not code matching

60.0

24.2

99.0

Code confirmation

WiFi version, the local network time will be automatically synchronized when

connecting to the network for the first time.

01：start code matching

Note: The USB and Battery used in the display panel cannot be

powered at the same time, you need to select one of them

Power

Device ID

0-99

Load

Wifi

IPSeting

Code Matching 00: code matching failed

Succeeded

Can only be

01: successful code pairing viewed.

5. Programming Set：

WiFi version can be set in APP.

Non-wifi version, press

this time, the screen displays (MON.TUE.WED.THU.FRI), the "minute" of the time

flashes, and the period 1

temperature, and period. Press

Press once more to confirm and exit.

Wall-mounted installation steps:

1. Remove the battery cover

2. Install 2*AA batteries3.

Install the battery cover

FEATURES

86.0

4 times to enter the programming mode setting. At

1. No need to reserve a cassette or punch for installation;

2. The display panel can be moved at will;

3. Temperature control accuracy (±0.5℃), providing the warmth

you want;

4. Support power-off protection, and the information will not be lost

when power-off suddenly;

5. Programming mode, 6 periods a day Programmable setting, ECO,

less cost, smarter and more environmentally friendly;

6. Support: Tmall, Amazon echo, Google Home, Yandex Alice,

Xiaomi Smart, Xiaodu Smart;

Temperature

compensation

-9~9℃

4. Fix the traceless hook on the wall ,then hang the product

. Press

again to select and set the hour,

to adjust the corresponding value.

Deadzone Temp. 1~5℃

HOME SCREEN QUICK REFERENCE

Min.Set Temp.

Max.Set Temp.

5~15℃

15~35℃

0~7

5℃

RECEIVER

Unfreezing Heating Weather

Default settings for program schedule：

35℃

BEFORE WIRING AND INSTALLING

1. Please confirm that this product is suitable for your heating equipment

before installation;

2. Be sure to keep the power off before installation or maintenance;

3. Please strictly follow the wiring diagram for wiring installation;

4. When installing to the wall, please confirm that it is fastened and

suitable for this product;

5. Do not pull the cable hard, otherwise it will cause damage to the product;

6. If a hard plastic wire is used in the installation process, it must be bent to an

appropriate angle in advance;

7. Please arrange professional installation;

8. Please contact the after-sales service for equipment failure, please do not

try to repair it yourself;

Standby

Brightness

MON.-FRI.

(①②③④⑤ shows

on scteen)

SAT.

SUN.

Period

Week

(⑥shows on scteen) (⑦shows on scteen)

Time

display

The humidity outdoor

Energy saving

Mode

00:OFF

01:ON

TIME

TEMP.

TIME

TEMP.

TIME

TEMP.

MODEL DEFINITION

GA: Water heating, 3A;

RoomTemp.

Low battery warning

Set Temp.

Temp.Display

Period 1 6:00~8:00

6:00~8:00

8:00~11:30

6:00~8:00

8:00~11:30

Energy saving

Temp.

All icons are

displayed when

booting

5~30℃

GB: Electric heating, 16A;

8:00~11:30

Period 2

Period 3

Outdoor wind speeds

GC: Dry contact gas/water boiler, 3A;

GAB: Electric heating + Water heating;

GBC: Electric heating + Dry contact gas/water boiler

GAC: Floor water heating + Dry contact gas/water boiler, Water heating

only applies to NC valves;

Programmable

Manual

00: Closed

01: Open

11:30~13:00

13:30~17:00

17:00~22:00

22:00~6:00

15 11:30~13:00 20

15 13:30~17:00 20

22 17:00~22:00 20

11:30~13:00

13:30~17:00

17:00~22:00

22:00~6:00

Restore factory

settings

00: normal mode,

01: factory mode

Period 4

Period 5

Period 6

W: APP wifi control

Example: BHT-8000RF-GAW

Version NO.

9. After installation, please refer to this manual to check again to ensure

normal safety

Mode

Clock

Power

on/off

Down

22:00~6:00

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Thermostats BHT-8000RF Wireless Thermostat User Manual
Make	Thermostats
Language	English
Filetype	PDF (Download)
File size	0.65 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Comments are closed.

Thermostats Instructions & User Manuals

Get the free PDF manual for the Thermostats BHT-8000RF Wireless Thermostat User Manual and access setup steps, usage instructions, and troubleshooting tips. 👉 View online or download now to keep your thermostat running smoothly!

Thermostats BHT-8000RF Wireless Thermostat User Manual Overview

Summary of Contents

Page 1: Power: Press the left button to control the receiver on/off. The wifi version can display weather information and connects to the Internet for updates. Electrical shock or equipment damage hazard can occur; disconnect power supply before installation. When the wifi version is connected, click the key to display current humidity information. Press and hold the right button to enter the code matching between the display panel and the receiver. The display panel uses 2*AA batteries for power supply; replace batteries in time if the icon appears. Manual mode allows users to set the temperature manually; programming mode follows preset values. BHT-8000RF is suitable for electric heating, water heating, wall-hung boilers, and boiler temperature control systems. Before wiring and installing, confirm the product's suitability for your heating equipment and keep power off. The product supports various smart home systems, including Tmall, Amazon Echo, Google Home, and Xiaomi Smart.
Page 2: - Network distribution mode - Method 2: Ordinary distribution - About WiFi - AP Mode - EZ Mode - Wi-Fi connection - Step 1: Download your APP - Step 2: Connect the thermostat - Simple exception handling - Service: 24-month warranty since date of purchase